Composite Materials

1

• Composite Materials

Dr. Alejandro Manzano Ramírez amanzanor2006_at_hotmai
l.com amanzano_at_qro.cinvestav.nx
October 2007
2

• Bibliografy
• HANDBOOK OF COMPOSITES, SECOND EDITION Edited by
  S. T. Peters Process Research, MountainView,
  Calfornia, USA , Second edition 1998 1998
  Chapman Hall Thomson Science is a division of
  International Thomson Publishing
• Chapter 6, Composite Materials, Alejandro Manzano
  Ramírez and Enrique Barrera, "Synthesis and
  Properties of Advanced Materials" edited by Carl
  McHargue,J.B.Darby,Jr., Miguel José Yacamán, José
  Reyes Gasga, Kluwer Academic Publishers,1997,pp.
  148-197
• F.C. Campbell,Manufacturing Technology for
  Aerospace Structural Materials,Firts Edition,
  Elsevier Ltd 2005
• Matthews F.L. and Rawlings R.D. Composite
  materials Engineering and Science, ,Woodhead
  Publishing Ltd and CRC Press LLC,Reprinted 2005
• Serope Kalpakjan and Steven R. Schmid,
  Manufacturing Processes for Engineering
  Materials, Fourth edition Pearson Education ,
  Inc, Reprint 2003
• Willian F. Smith Foundations of materials
  Science and Engineering, Third edition, Mc
  Graw-Hill 2004
• Low-cost composite materials and structures for
  aircraft applications, Deo, R.B., Starnes, J.H.,
  Holzwarth, R.C.,May 2001
• Handbook of Materials Selection, Myer Kutz
  Associates, Inc.,JOHN WILEY SONS, INC.2002
• Advance Ceramic Processing and Technology
  J.G.P.Binner, processing of ceramic composites
  ,Noyes Publications 1990, p. 131

3

• Further readings
• Jean LUYCKX, Composites à fibres de carbone dans
  le génie civil, Techniques de lIngénieur, traité
  Plastiques et Composites
• A. Manzano-Ramírez, E. Nava-Vazquez and C.
  Vazquez-López, "Surface Analysis of an Aluminium
  Metal Matrix Composite", Scripta Metallurgical
  et. Materialia, 1993, vol.29, 9, pp. 1241-1246
• A. Manzano-Ramírez, A. Magallanes-Castañeda and
  F.Ruiz, "Topographic Features of an 319
  Al/SiCp/15p", Scripta Metallurgica et Materialia,
  1994, vol.31,10, pp.1371-1376
• Manzano-Ramírez A., Ruiz F. y Magallanes-Castañeda
  A., "Observaciones Microestructurales en el
  Composite Al/Si/15p Obtenido por el Procedimiento
  de Compocolado", Revista de Metalurgia, CENIM
  Madrid,España, vol. 32, 6 , Nov-Dic. 1996, pp.
  359-368.
• Hallen J. M., Balmori H.M.,Jaramillo D.,Estrada
  J.L.,González J.L.,Cruz H.S. and Manzano
  A.,"Influence of Mg and Stirring on the Strength
  of an aluminium matrix Composite obtained by
  Compocasting" , Key Engineering MATERIALS Vols.
  127-131 (1997),pp. 495-502
• R. García, A.Manzano, V.H. López, and E.
  Bedolla., Comparative welding study of the Metal
  Matrix Composite with MIG Welding Process, using
  Direct and Indirect Electric Arc, Met. Trans B
  Journal, vol. 33B, no. 6, pp. 932 937, 2002.
• García R., López V.H., Bedolla E. and Manzano A.,
  The MIG welding process with Indirect Electric
  Arc, J. of Materials Science