Title: Life to Eagle Scout Project Proposal and Related Procedures
1Life to Eagle Scout Project Proposal and Related
Procedures
2OR My Contract with the Community and Scouting
3- STEP ONE
- PLAN, DEVELOP AND GIVE LEADERSHIP TO OTHERS IN A
SERVICE PROJECT HELPFUL TO ANY RELIGIOUS
INSTITUTION, SCHOOL OR YOUR COMMUNITY
4Rules
- Milton District believes that a scouts project
is his thought and his love and we will Endeavour
to make it an approvable project - SO LONG AS CERTAIN CRITERIA ARE MET
5CRITRERIA
6- 1) Must not create financial profit for a
commercial entity or be of a commercial nature.
Not solely for a business or individuals gain - Example
- A Scout wants to build a gazebo with garden for
a Nursing Home so the residents have a nice place
to sit---That is OK but if the Nursing home plans
to rent it out for weddings etc then it is not OK
7- 2) Not a Routine Labor project
- Example
- Organization wants help and gives the scout the
plans, the check and says make it happen - The scout must be a part of the planning and the
fund raising.
8- 3) Not on Council property or part of a BSA
Activity or Property - Can not do Eagle Projects on the Scout Camps or
Visitors Service Center. - Remember this is a COMMUNITY SERVICE PROJECT So
municipal parks are acceptable sites
9- 4) Not for a direct gain for the Scout Unit
- Building a Scout Hut or improving a Scout hut is
not acceptable. - Building a nature trail at your sponsoring
organizations place that scouts as well as
others may use is acceptable
10- 4) Must not be a fund raiser in itselfmust have
a purpose for the fund raiser - Example
- Buying a defibrillator is not acceptable, but
- buying a defibrillator and then teaching CPR
- classes to certify people in its use is
- allowable
11- 5) It can not be an extension of an existing
Eagle project Nor can two prospective Eagle Scout
candidates work on the same project
12The Key Requirement
- The Scout must show
- LEADERSHIP
- Think of the project as a Troop Project and the
Eagle Scout as the SPL of the Project - Not the Patrol Leader of the Project
13The Proposal
- The Eagle Scout Candidate must write a proposal
of his service project - The best way to determine if you have included
enough information in the proposal write up is - Is this proposal complete enough that another
Scout would be able to use it to do your project
from beginning to end exactly or better than you
would do it without your being present!
14Use the Eagle Scout Workbook
- This workbook and a guide to the workbook is
found on the Milton District Web Site
www.miltonbsa.org - Under programs headingthen under Advancement
then under Eagles Nest - There are many forms of the Eagle Scout
BookletUSE ONLY THE ONE ON THE MILTON WEB SITE!!
15A BIG FIRST
- Before you let a scout start the Eagle Scout
project write-up have him attend the Life to
Eagle Seminar - Same time and night as Eagle Board of Reviews
16THE WRITE UP
17The Secret Revealed
- The tendency of the scout is to do the
description first then write the present
conditions etc. - HAVE THEM WRITE THE STEP BY STEP
- FIRST
- Then when he does each section have him read the
step by step and then write the section. Read
the step by step and write description, material,
supplies, helpers, schedule etc.
18- The following will describe each of the sections
as they appear in the Eagle Scout project
Write-up in that specific order - Have your scouts stick to the order
- Creativity on the write-up scheme does not get
extra credit.
19GENERAL ISSUES
- Number all pages including attachments
- Put a header or footer on every page stating Joe
Scout Eagle Project - All attachments must be referenced to somewhere
in the text. - All attachments have a title and label
(attachment or appendix A or 1 etc) - Include a copy of your Life to Eagle Attendance
certificate
20Cover page
- Remember to write complete addresses including
city state and zip code - Unit No. Include unit with number
- Troop 2000 not T2000 or 2000
- Unit advancement committee persons name Address
Telephone No. - This is the person all correspondence with
Atlanta Council for Eagle Board of Reviews will
occur
21Project Description
- Describe the project you plan to do.
- Key words here are brief description---dont care
about history or past - State WHAT NOT HOW you will do with a brief
explanation
22What group will benefit from the project?
- Benefitting Organization Telephone No
- Name of religious institution, school or
community - Street Address City State Zip code
- Basically who is your sponsor or
- Who are you Helping?
23My Project will be of benefit to the group
because
- WhyBUT Briefly
- Dont fill with Jibber Jabber!!
- If necessary might want to include a brief
description of organization if needs explaining - For example working at your church is obvious but
saying working at the Drake house Few might know
what type of charity the Drake house is
24The project concept was discussed with the
following representative of the group that will
benefit from the project.
- This concept was discussed with my unit leader
on Date - Representatives Name Date of Meeting
- Representatives Title Phone No.
- This is the person who is signing your project
and will be agreeing that you completed your
project. - Saying Liaison or chairman really doesnt say
anything because it could be the organization or
the unitstate Church Scout Liaison, etc - THIS MUST BE FILLED OUT BEFORE SUBMITTING TO
DISTICT
25Project Details
26Present Condition
- What is the present condition. Why is your
project necessary - PICTURES are worth a thousand words
- Use pictures when ever possible and reference to
them
27Plans / Drawings / Designs
- This is architectural type drawings or schematics
or diagrams. - Not written step by step plans
- Need to visualize what you want to accomplish and
how (if building a bench include schematics and
instructions---if taken from a book or internet
source needs to be referenced properly - Each Drawing/Diagram should have a Title and
Attachment Letter (B or 2 etc, Bench
Construction Diagram, B3 etc.) and be referenced
in this section - Include a diagram of what the finished
product/project should look like if appropriate.
Landscaping or benches this is possible,
collections or blood drives this is not possible. -
- Any zoning or legal writings, specific
specifications by community pertaining to your
project
28- The plans dont have to be your original design.
They can be from a book or web site etc. - Credit must be given to the author or it is
Plagiarism. - Quote the author, the source exactly as you would
for a report for school
29- If the plans are your original design
- Make them neat!!!
- State its your own design
- USE A RULER, WRITE NEAT
- A sloppy diagram or sloppy write up infers the
work on the project will also be sloppy
30Materials
- Materials are used and can not be reused e.g.
wood, nails, paint, stain concrete etc.
31- Be specific what exactly are you buying. Each
item should have the proper dimensions (Inches,
feet liquids- quart, gallons (shrubs) 5 gal or
10 gal, etc. - Screws or nails dont say 1 say 1 box of 8
screws or on materials list Instead state 8
Screws size (e.g.1.5) ____ box(es) of 100
- Dont say plants but specifically what plants
(proper or common names) - Lumber specific wood size (2x6 etc) treated or
untreated pine, cedar etc - Cement or Sand. Dont say 5 bags instead state 5
20lb bags of Sand etc. - Paint or stainDont say 2 cans it is 2 one
gallon cans etc.
32- Material Provided By Needed Cost Cost
- Sub total___________
- (dont forget tax)
- Provided by---where are these materials coming
from. Home Depot, a specialty store. - If you are donating an item put your or your
familys name and in parenthesis (donated) and
the cost of the donated itemAnother scout might
not get that item donated. Dont say donated by
me.
33Supplies
- The extras for example paper for diagramming,
pencils, car wash soap, paper clips, rope,
sandpaper, paper cups, trash bags, nylon strings
or spray paint for marking areas, buckets etc.
Can fall in here - If supplying bottled water instead of Cooler of
water for drinking. - Include items needed as part of fund raising.
- Lunch
34- Provided By Needed Cost Cost
- Sub total___________
- (dont forget tax)
- Same as Materials
35Tools
- What tools to you need, include all, mops brooms,
shovels, saws, paint brushes, files, sanders,
etc. - Safety goggles, work gloves can go here or under
supplies if you are supplying - First Aid kit
- Cell Phone
- Water Cooler for drinking
36- Tool Provided By Total Needed
- Sub total_________
- Total cost of project_______
- (dont forget tax)
- Include cost of donated items because some one
else might not be so lucky to get them donated
Dont need to price donated or borrowed
toolsassumed everyone can borrow tools except
special power tools that will need to be rented
like a jackhammer, chain saw, wood splitter,
cement mixer etc - Rented tools costs needs to be included here
37Step-by-Step Instructions
- This is the heart of the project
38- Very specific so
- Anybody
- can build it equal or better than you-- just by
reading your project proposal.
39First Step
- First step is usually fundraising
- You might briefly state your fundraising but
refer to fundraising section where Financial
Discussion belongs - Step 1 Fundraise for the project see details in
Financial Plan - is more than sufficient
40Second Step
- Procure materials, supplies and tools
- How and who
41Model Airplane Approach
- When you build a model airplane are the
instructions one sheet a paper with a bunch of
steps - OR
- Is there some instructions with a diagram
specific to those instructions and then some more
instructions with a diagram specific to those
instructions
42Lets Build a Cello Rack
43Which would be easier to follow
44This
45- Assembly
- Use diagrams 4 and 3.
- Constructing the cello rack
- Use the drawn instructions at the beginning of
the step-by-step instructions for where to drill
holes and put screws. - Gather materials.
- Five 6x 12
- Three 6x 72
- One plywood 6x 72
- Two 6x 36
- Two small plywood sides
- Place two (2) 6x 72 parallel to each other
- Place one (1) 6x 12 in between on each side of
the two boards. Mark and drill holes using the
hand drill screw boards in place one side at a
time. Use the metal angle to keep the boards at
right angles. This should create a rectangle. - Measure and mark the places for the three
remaining 6x 12 boards to be placed. They
should be placed 15.5 apart. Mark, drill holes,
and screw. - Hold in place two (2) 6x 36 and mark and drill
holes on one side of each board. Hold the ends
of the two boards vertical to the ends of the
base structure already built. Check to be sure it
is level and screw together. - Hold in place the 6x 72 and mark and drill
holes on both ends. Hold behind and
perpendicular to the two 6x 36 boards, check to
make sure that the boards are at right angles
with a metal angle and screw into place. - Hold in place one (1) small plywood side and mark
and drill holes. Be careful not to line holes up
with any existing screws. Make sure the plywood
side is flush with the rack and screw in place. - Repeat step G for the other side.
- Hold in place the plywood 6x 72 and mark and
drill holes on the straight side. Make sure that
the holes only line up with the 6x 72 board.
Hold the plywood in place and screw in place.
46OR THIS
47- Cutting Wood
- On the 48x 96 ply wood measure and cut five (4)
major sections using diagram 1 - 6x 96
- 6x 96
- 36x 36
- 36x 60
- Put one (1) 6x 96 aside
- On the other 6x 96 measure 72 and cut. Put
the 6x 72 aside and discard the 6x 24 - On the 36x 36, measure and cut it into two (2)
18x 36 sections - Using diagram 4, measure 2 on the 18 side and
6 on the opposite 36 side. Using the chalk
line, connect the two measurements making a 34
long diagonal line and cut. - Repeat step D on the other 18x 36
- On the 36x 60 using the chalk line divide it
diagonally and cut. This should create two (2)
36x 60x 70 right triangles. - Using diagram 5 and measure the triangle into
five sides. Look at diagram 1 for the positions
of each measurement. From the right angle
measure 30 and 54. From the 54 mark measure
2 across using the metal 90-degree angle. From
the 30 mark measure 6 across using the metal
90-degree angle. Using the chalk line, connect
the 2 and the 6 mark. Once all measurements
are checked with diagram 1 and 5, cut. - Repeat step G on the other triangle.
- After all of these steps are completed there
should be a 6x 96 , 6x 72 , two cello
sides, and two bass sides.
48- Using diagram 2 measure and cut the 2x 6x 8ft
lumber. - Board 1 measure two (2) 36 sections and one (1)
24 section and cut. - Board 2 measure one (1) 72 section and cut.
Save the 24 section. - Board 3 measure one (1) 72 section and cut.
Save the 24 section. - Board 4 measure one (1) 72 section and cut.
Save the 24 section. - Board 5 measure five (5) 12 sections and one
(1) 24 section and cut. Discard extra board. - Board 6 measure one (1) 54 and cut. Discard
extra board. - Board 7 measure one (1) 54 and cut. Discard
extra board. - Boards 8, 9, 10 make no cuts.
49- Using diagram 3, on one side of the 6x 72
plywood, measure and cut. - From end point R measure 8.25
- Using the metal angle, measure down 3, over 3,
and up 3. This should create a 3x 3 square. - From point R measure 25.75
- Using the metal angle, measure down 3, over 3,
and up 3. This should create a 3x 3 square. - From point R measure 43.25
- Using the metal angle, measure down 3, over 3,
and up 3. This should create a 3x 3 square. - From point R measure 60.75
- Using the metal angle, measure down 3, over 3,
and up 3. This should create a 3x 3 square. - Cut all four (4) of the 3x 3 squares out.
- Using diagram 3, on one side of the 6x 96
plywood, measure and cut. - From end point R measure 11.25
- Using the metal angle, measure down 3, over 3,
and up 3. This should create a 3x 3 square. - From point R measure 34.75
- Using the metal angle, measure down 3, over 3,
and up 3. This should create a 3x 3 square. - From point R measure 58.25
- Using the metal angle, measure down 3, over 3,
and up 3. This should create a 3x 3 square. - From point R measure 81.75
- Using the metal angle, measure down 3, over 3,
and up 3. This should create a 3x 3 square.
50- Assembly
- Use diagrams 4 and 3.
- Constructing the cello rack
- Use the drawn instructions at the beginning of
the step-by-step instructions for where to drill
holes and put screws. - Gather materials.
- Five 6x 12
- Three 6x 72
- One plywood 6x 72
- Two 6x 36
- Two small plywood sides
- Place two (2) 6x 72 parallel to each other
- Place one (1) 6x 12 in between on each side of
the two boards. Mark and drill holes using the
hand drill screw boards in place one side at a
time. Use the metal angle to keep the boards at
right angles. This should create a rectangle. - Measure and mark the places for the three
remaining 6x 12 boards to be placed. They
should be placed 15.5 apart. Mark, drill holes,
and screw. - Hold in place two (2) 6x 36 and mark and drill
holes on one side of each board. Hold the ends
of the two boards vertical to the ends of the
base structure already built. Check to be sure it
is level and screw together. - Hold in place the 6x 72 and mark and drill
holes on both ends. Hold behind and
perpendicular to the two 6x 36 boards, check to
make sure that the boards are at right angles
with a metal angle and screw into place. - Hold in place one (1) small plywood side and mark
and drill holes. Be careful not to line holes up
with any existing screws. Make sure the plywood
side is flush with the rack and screw in place. - Repeat step G for the other side.
- Hold in place the plywood 6x 72 and mark and
drill holes on the straight side. Make sure that
the holes only line up with the 6x 72 board.
Hold the plywood in place and screw in place.
51(No Transcript)
52(No Transcript)
53- Thus the advantage of detailed instructions with
diagrams
54- You have to convince the reviewer and ultimately
the district Advancement Chairman that you know
what you are doing. - They are not blindly going to trust that you know
what you are doing and will do a good job. They
want to see that you know what you are doing
55Obvious pit falls
- Include what it should look like when finished
- Diagrams showing the location that objects will
be located at when finished - Finishing---sanding, painting, sealing
- Anchoring or securing or cementing
- If power tools used make sure to CLEARLY state,
who measures the item, who marks the item and who
operates the power tool
56 57Financial Plan
- You have the total cost from materials, Supplies,
Tools---now how do you finance it.
58First things first
- Need to show on the proposal the finances
- First part should be the following
- Cost of materials/supplies/tools ________
- Value of donated items (minus) ________
- Amount needing to be fund raised______
- (dont forget tax)
- Its a good idea to have extra money for
unforeseen issues that will arise.
59- Dont forget many fund raising adventures have a
cost to them (materials, supplies and sometimes
tools) and that needs to be included in the
proposal cost statements
60Next How will you secure funding
61- 1) Ask the sponsoring organization or specific
businesses for funding - Make an appointment
- Wear your uniform
- Bring a letter specifically requesting what you
want of them (money list amount or specific item
donations) - A copy of your proposal for them to keep
- Presentation material (poster display pictures
etc - A copy of the Unit (via Sponsoring Organization)
- IRS 501 (c)3 form
62- 2) Do a fund raiser
- Examples Car Wash (when no draught)
- Bowlathon, dinner, yard service, baby sitting
service, garage sale, sell candy bars, movie
night, Vacuum out, Concert, Bake sale, Crab Cake
Dinner, Troop Dinner - Skys the limit on imagination
- You will need to show your profit Margin
- NO RAFFLES, BINGO, Gambling Ponzi etc
63- 3) You can solicit funds from the community, by
personnel requests either by a table at the
Church, School, Grocery Store etc -
- Door to door in the community
- State how you will distribute flyers
- (Remember USPS Laws about mailboxes)
-
- Letter writing campaign
- Has costs such as stamps and envelopes
64- If you write letters to send out requesting
donations, copies must be in your proposal,
referenced to in the text and placed in the
proposal as an attachment with a title and Label
(e.g. attachment L fund raising letter)
65You must show where your funding is coming from
- If it is one source then state that source. If
this source has nothing to do with the project
then an explanation as to why they are donating
is required - If it is from multiple sources then a ledger or
statement of donations needs to be included IN
THE PROPOSAL - NOTE The Ledger must be FILLED OUT COMPLETELY
and included in the final report.
66Ledger
Name Date amount Check number/cash
67- Who keeps the ledger?
- Rather than I do---
- Project treasurer best person
68Checks
- Who do checks get made out to
- Eagle Scout
- Eagle Scout Family
- Unit
- Sponsor of Unit.
- Separate Fund
69- Dont forget to use the users of the project as a
source of contribution letters rather than
hitting up the troop or your neighbors - Fixing a playschool playground the parents whose
children are a better source of revenue than your
troop or neighbors who dont care about this
particular Pre-School
70Receipts
- Many donor would like a receipt for taxes.
- Include a copy as an attachment with proposal
71Who cant donate
- Funds from illegal activities, including gambling
or BINGO - Funds from alcohol, smoking or drugs
- Organizations that run against the principles of
scouting are not good sources, e.g. Loveshack
72Family Donations
- It was decided by the Milton District
Advancement Committee that Scouts and their
families (any relation from parent to 53rd
removed cousin) -
- May contribute up to 25 of the total gross cost
of the project.
73- Baby sitting or lawn service other earned money
by the eagle scout candidate can only be used in
the family 25 limit rule - However if the scout creates a service that uses
other workers (Lawn service or babysitting
service) where the money earned goes toward an
eagle project rather than paying the workers any
of this money may be used no limit.
74- It is acceptable for you or your family to pay
for snacks, lunch or refreshments or bottled
water, under the scout is courteous rule, in
addition to the 25 rule
75What is plan B
- What do you do if your fundraising idea is not
good enough to fund the project. - Do you have another idea or do you keep doing
this fund raiser until you have enough
76Overage
- What do you do with excess monies?
-
- Usually you give it to the sponsor you are
helping. - If it is another organization explain why? Why
the organization you are helping is not good
enough for the extra money - Make sure sources of income know that extra
money goes to a different place than the project
recipient.
77Schedule
- How much time will you need to complete this
project? - Dont just say 104 hours or 3 days
-
- Need to know how many hours per day and how many
days
78Man-Hours
- One of the determinants of whether the project
is of large enough scope is by looking at man
hours. - The reviewer will look at how much time the
project took as well as the number of helpers
required. - We calculate man hours the scouts dont.
79Pitfalls
- Fundraising takes time
- How much time is spent on the actual fundraiser
and how much time must elapse before going onto
the next step - Example if you are doing a letter writing
campaign how many weeks do you allow for the
return envelopes
80Choice one
- Fundraising Day 1 9am to noon
- Wait two weeks and then
- Pre Work Day 1 6pm to 8pm purchasing materials at
Lowes - Work Day 1 9am to noon
- Measure, cut and sort wood into kits
- Work Day two 830am to 500pm with 30 minute
lunch break build all 6 benches - Work Day 2 830am to 500pm with 30 minute
lunch break transport and install benches - If needed Work Day 3 830am to 500pm with 30
minute lunch break
81Choice Two
- Fundraising Day 1 9am to noon
- Wait two weeks
- Pre Work Day 1 6pm to 8pm purchase supplies
- Work Day one 800 am to 900 am Quartermasters
prepare work site - 900am to 915am Orient the crews
- 915am to noon Scouts measure wood, adults cut
wood, quartermasters sort wood into kits
82- Work day 2
- 800am to 900 am Quartermaters prepare work site
- 900 to 915 Orient Crew Leaders
- 915 to noon assemble benches
- Noon to 1230 Lunch
- 1230 to 400pm finish benches
- 400-500 Cleanup
83- Work Day Three
- 800am 830 am Quartermaster load up truck and
deliver benches and tools to work site - 900- 930 am Quartermasters unload truck and set
up work site - 930 am to 945 am Orient team leaders
- 1000 to 1200 Cement Benches in place
- 1200-1230 Lunch
- 1230-430 Finish cementing benches
- 430-530 Clean up
84- Work Day Four (if needed)
- 8am to 5pm or finish
- Finish any part not completed in previous work
days
85 I dont want or need an hourly clock report
- 800-900 set up
- 900-930 orient team leaders
- 930-1000 build base of benches 1-3
- 1000-1100 build seats of benches 1-3
- 1100-1200 build backs of benches 1-3
- 1200- 1230 Lunch
- 1230-130 build base of benches 4-6
- 130-230 build seats of benches 4-6
- 230-330 build backs of benches 4-6
- 330-430 Stain all 6 benches
- 430-530 Clean up
86It is better to be ahead of schedule than to
explain why you were behind on schedule
- Remember to include extra days if necessary to
finish the project. If you think you will need
only 1 day of fundraising and 2 work days
schedule for 2 fund raising days and 3 work days.
This way if you need the extra time you are not
behind on the schedule and then need to explain
it as a variance to your project (end of project
descriptions). - Also this allows for inclimate weather.
87Written/Printed Information
- List each Attachment by Letter and Title
- A Before Photos
- B1 Project Site Plan
- B2 Bench Construction Drawing
- Etc. Dont forget Sign-in, Sign-out Sheet For
Record Keeping, fund raising flyers, maps,
Letters soliciting funds, articles advertising in
newspaper etc.
88Helpers / Workers
- Who are you leading, How are you getting these
volunteers and How are you leading them
891) State your source of volunteers
- Any one can help you!
- Can be but not exclusive to Scouts
- Neighbors
- Family
- Church members
- Friends
- Male or Female
- Youth and Adults
90How are you soliciting for volunteers
- Announcement at troop meeting
- Volunteer sign up sheet (sample as attachment)
- Flyer (sample as attachment)
- Email (sample as attachment)
- Announcement at school
- Poster at church (sample as attachment)
- Facebook (sample as an attachment)
91How are you organizing or leadingHow are you
showing leadership
- List teams and their functions
- Who leads these teams
- For example the team leader of fundraising crew
might be the project treasurer - Or leader of the Quartermaster crew might be the
Quartermaster
92Numbers
- How many Youth will you require
- Per crew
- Per day
- Per Project
- How many Adults will you require
- Per crew
- Per day
- Per Project
93Example
- The following crews will be used for the project
- Fundraising Crew Lead by the Treasurer
- Will consist of 4 youth and two adults
- This crew will man a table outside the church
during Sunday services with a poster display of
the project. They will accept all donations and
answer questions about the project - All donations greater than 20.00 will be logged
on the ledger sheet by the Treasurer - The Treasurer will turn all money in to the Troop
Treasurer
94- Quartermaster Patrol
- Will consist of 4 youth and 2 adults
- Will be lead by the quartermaster and their
responsibilities will be to purchase all
materials, Supplies and tools - Make sure all donated supplies are at the work
site - Make sure all borrowed tools are at the work site
- The work site is set up and ready for the work
crews prior to their arrival - Sort the materials into kits for the work crews
- Make sure all borrowed tools are returned to
their owner in equal or better shape than they
were borrowed - Help in transporting materials to works sites
95NOTE
- Almost every project needs a QUARTERMASTER!
96- Measuring patrol
- Will consist of 4 youth
- Will measure wood and make marks for
cutting/drilling patrol - Cutting/drilling patrol
- Will consist of 2 adults
- Will cut and drill wood based on measurements
from measuring patrol
97- Assembly patrols2 patrols
- Will consist of 4 youth per patrol with an
assigned crew leader - Will assemble benches
- (each patrol will assemble 3 of 6 benches)
- Securing patrol 2 patrols
- 3 youth per patrol with one of the youth being
an older scout - Will dig the holes and cement the benches in
place
98- So how may youth and adult will you need each day
and total for the project?
99Tracking Volunteers
- How will you keep track of the time people
volunteer for your project - Log sheet for volunteers with sign in and sign
out time Include as an attachment - This attachment (handwritten filled in) MUST be
in the final writeup
100Adult Supervision
- Minimum of two adults AT ALL TIMES
- At least ONE of the adults MUST be Youth
Protection Trained.
101Adult Leaders?
- You do not have to have adult leaders.
- In fact if you state you will have adult leaders
and one of them can not attend the project
because of work or illness you need to find
another leader or you must explain a variance in
the final write up. With that in mind state two
adults and if you happen to get leaders to
volunteer all the better for you.
102Named Ones
- If you name a specific individual will attend
then that person needs to attend. If they can
not due to illness or work you either have to
postpone your project or do the project but the
project now has a variance that needs to be
explained in the final write-up
103KEEP IT SIMPLE!
- Just state
- There will always be at least two adults present
at all times during the project - At least one of these adults will be BSA Youth
Protection Trained
104Work Site
- List all sites the project will take place at
- Work houses, project sites, fund raising sites
105Properly list the Places
- Work site 1
- Kopel Residence (not my house)
- 5315 Skidaway Drive Alpharetta GA 30022
- Make reference to map(s)
- Work Site 2
- ETC.
106Key
- Do not use specific written directions from a
specific place. - Think of it this way
- If some one from National BSA was coming to see
this project will these maps be enough (with a
general Atlanta area map) to find the site.
107- CAN YOU FIND THE WORK PLACE?
108Aerials dont work well for worksite Location
109This one?
110This one?
111This works well
112- Remember map of site or campus showing where the
project is taking place on that site or campus
113Aerials work great for at the worksite
114Transportation
- Best way to state it---and you may plagiarize
this line -
- For all helpers under the age of eighteen,
transportation to and from the work sites will be
the responsibility of the Scouts, or helpers
(if not a scout) parent or guardian or as
arranged by his/her parent or guardian. All
volunteers over the age of 18 will be responsible
for their own transportation
115Material Transport
- How are materials or project parts going to be
transported to the work sites -
- Truck, Suburban, Mini Van, 20 cars, Trailer
etc - Sherpas and pack mules are acceptable
116Tour Permit
- Is required anytime car pooling is utilized in
any form - Include tour permit with information filled
outwhere you are going, CPR adult? - Top and bottom parts filled out.
- Tour leader
117Safety
- EVERY PROJECT REQUIRES
- First aid kit
- Cell Phone
- Knowledge of where the closest hospital is in the
event of an emergencyState the name of this
Hospital - Might not use tools that maim but there is a
risk of heart attacks, objects in the eye or
stupid Boy Tricks like throwing rocks and hitting
another person
118Map from Worksite to Hospital
- Emory Johns Creek Hospital 770-454-20066325
West Johns Crossing, Duluth, GA 30097
119Directions to Hospital
- Emory Johns Creek Hospital 770-454-20066325
West Johns Crossing, Duluth, GA 30097 - Directions
- 1Start out going SOUTHEAST on SKIDAWAY DR toward
SKIDAWAY CT.0.3 miles - 2Turn LEFT onto STATE BRIDGE RD.1.1 miles
- 3Turn LEFT onto MEDLOCK BRIDGE RD / GA-141 N /
PEACHTREE PKWY.3.5 miles - 4Turn SLIGHT LEFT onto W JOHNS XING.0.3 miles
5Turn LEFT.lt0.1 miles 6End at Emory Johns Creek
Hospital 6325 West Johns Crossing, Duluth, GA
30097, US
120Power Tools
- Only Scouts over the age of 16 or Adults may
operate power tools. - Power tools are defined as tools that can maim,
e.g. electric (plug in or battery) saws, drills,
chain saws, bobcats, augers etc Battery operated
Electric Screw drivers or sanders are acceptable
for any scout to use. - Only Adults may operate log splitters or chain
saws - All operators of power tools MUST wear eye
protection and gloves whether it is battery
operated or plug in. - If you are cutting wood Basic Totin Chit rules
applyYou need a saw yard or safe saw area that
is not trafficked or entered by volunteers.
121Goggles, Masks and Gloves Are masks needed?
- Power tools masks optional unless power sprayer
- Sanding mask
- Spraying sealant, Painting mask when spraying or
spray painting - Is special equipment necessary for protection
(rubber or neoprene gloves when chemicals (weed
Killer) are used? Be aware of hazards, and how to
deal with them. For example, if the chemicals are
deemed hazardous, only adults should use them to
spray weeds, etc. and the adults should wear
breathing protection, skin protection, etc.
122Other Safety Issues
- If Special Equipment is used a lecture in safe
use of the equipment is necessary - Are the scouts going door to door collecting
items---BUDDY System used - Any other safety features required
- Car wash or Vacuum outorange vests for traffic
controlone way routing of traffic
123OTHER
- A Tour permit will be required
- If the activity is deemed to have a degree of
danger to it (e.g. canoeing to the site, SCUBA
Diving, other water related events, rock climbing
to get to site, Bulldozers used etc.) as
determined by the District Advancement Chairman - Car pooling is used
124(No Transcript)
125Signature Page
- THIS NEEDS TO BE SIGNED BEFORE SUBMITTED TO
DISTRICT - You need to send a copy of the signatures with
your proposal submission - OR
- The Eagle Advisor states in the Email
transmission that the signatures have been
obtained and are on file.
126- Approval Signatures for Project Plan
- Project plans were reviewed and approved by
- ____________________________ ___________
- Religious institution, school, Date
- or community representative
- ____________________ __________
- Scoutmaster/Coach/Advisor Date
- _____________________
__________ - Unit Committee member Date
- ______________________ ____________
- Council or district advancement
Date - committee member
127NOTE
- A scout MAY NOT START his project until it has
been approved by the District Advancement
Chairman - To speed scouts along we have two forms of
approval
12830 Day Conditional Approval
- This means the project is sound and will be
approved with some corrections. - Usually this is granted electronically and the
scout will need to obtain the District
Advancement Chairmans signature - There also might be minor corrections the scout
will need to address before signature is given.
129- Since the project is sound we allow the scout to
start fundraising and purchasing materials
however he MAY NOT START the actual physical part
of the project until - The District Advancement Chairmans Signature is
obtained
130- Conditional approval is only good for 30 days.
After that all work on the project must cease
(including fundraising until the proposal is
signed.
131Approved
- Once the District Advancement Chairmans
signature is obtained the project may proceed as
described by the scout
132Attachments
133Ledger for funds Attachment -1
Name Date Amount Check
134Receipt Attachment 2
- Donation Receipt Date Thank you for your tax
deductable (IRS 501 (c) 3 donation in the amount
of _________________for Joe Scouts Eagle
Project to supply Christmas Stockings to the
children supported by the Childrens Restoration
Network.
135IRS Form 501 (c) Attachment 3
136Volunteer sign up sheetAttachment - 4
Name Telephone Email Day volunteering
137Volunteer Hours Attachment- 5
Name Date Time in Time out
138Letter for DonationsAttachment 6
- Attachment D Letter for money donations
- Dear First Last Name,
-
- I hope your year is going great. I have been
extremely busy preparing my Eagle project. To
achieve the rank of Eagle Scout, which is the
highest rank in Boy Scouts, you must earn
twenty-one or more merit badges, along with other
difficult and challenging achievements. Although
these achievements are very important for the
rank of Eagle Scout, the dominant and most
important qualification is to carry out a project
worthy enough to be considered an Eagle project.
My project will consist of building three high
quality benches for my school, Providence
Christian Academy. They would be placed on the
walkway next to the Green an area between the
High School and Elementary buildings, and would
serve a practical purpose for students and staff.
Also they would serve to add curb appeal for the
school. The benches will be made from wrought
iron, and the brick planters will act as legs. - Part of the Eagle project is raising enough
money to build your project. The money raised
will be used for the following materials brick,
sand, block, mortar, rebar, and concrete, along
with the custom built wrought iron benches. Money
will also be needed to pay for the masons who
will assist me in the building of the benches. If
you would like to help me accomplish my Eagle
Scout project and reach the highly distinguished
rank of Eagle, you may donate money at this time.
Any donation would be much appreciated. Checks
can be made payable to Troop 143 Joe Scout
Eagle Project, and they are tax deductible. I
hope you will be pleased with the outcome of my
Eagle project, and I thank you for the part your
family plays in my Eagle Scout project. -
- Sincerely,
- Joe Scout Eagle Scout Candidate Troop 1
139Flyer to Solicit VolunteerAttachment 7
My name is Joe Scout I am currently a life scout
working on my eagle project. My project is to
replace old benches in Azalea Park located in
Roswell with new benches that I need help
building. I can use all the help that I can get
so if you can please stop by to help me out that
would be much appreciated. Dates X, XX- X,
XX Who anyone that can help What help me with
building benches for my eagle project Where at
azalea park located in Roswell When this coming
weekend If you have any questions about what
time to come and how to get to the park please
contact me at 404-840-6711
140Final Write-Up
141Carrying Out the Project
- Hours I Spent Working on the Project
- Keep a notebook in your pocket---log every call,
every letter, every second you spend on the
project---the time will add up - Keep a Log or sign up sheet for volunteers
- You the one you used in the proposal
142- Include completed Volunteers time sheet (sign in
sign out sheet)The one you used in the proposal. - Include a log sheet of your time spent on the
project. - Your time begins when the project is accepted
any work after that counts toward the project
total
143Fill out the numbers
- Hours I spent Planning the project
- Carrying out the project
- Total hours I spent working on the Project
-
- Hours Spent by Scouts, Venturers, or Other
Individuals - Working on the Project
- Total number of hours peers worked on the project
- Grand total hours spent by me and other youth on
the project. - Total hours spent by Adults to complete the
project
144Materials Required to Complete the Project
- Can state same as what was planned however the
following materials needed to be added--- Include
specifics on what was added and the extra cost. - Or
- Can submit a whole new list with prices
145Financial
- List all donations, Who donated and What amount
they donated. - Have the completed financial ledger sheet
- Use the ledger sheet you had in the proposal
- What did you do with any excess funds?
146Changes
- This is a most important section and the
one that is most heavily reviewed - List all changes from the plan including extra
materials and how extra cost was covered - Include changes in planned schedule and how it
was worked out - Any other road blocks---what did you do to
handle the situation?
147After Photographs
- EXTREMELY IMPORTANT
- Cant judge the project unless can visualize
what was accomplished
148Approvals for Completed Project
- Start Date of Project ____ Completion date of
Project ____ - This project was started and has been completed
since I received the - Life Scout rank, and is respectfully submitted
for consideration - __________________________ ________________
- Applicants Signature Date
-
- The project was planned, developed, and carried
out by the candidate - ___________________________ _________________
- Signature of Scoutmaster/Coach/Advisor Date
- ___________________________
_________________ - Signature of representative of Date
- religious institution, school, or community
149Statement of Ambitions and Life Purpose
- You do not need to fill this out when you are
submitting your project for District Approval.
Only need this when you finish your project and
are submitting for your Board of Review.
150Letters of Recommendation
- Do not need while working on Eagle Project
- Do not need them when submitting an Application
to Council for a Board of Review - MUST HAVE ALL LETTERS OF RECOMMENDATION BY BOARD
OF REVIEW NIGHT No exceptions
151Rules for Letters of Recomendation
- The scout is only to name and deliver to the
individual a request for a letter of
Recommendation - After that he is not to have any contact with the
individual, regarding the letters of Rec - The Eagle Advisor is responsible for follow up
nagging etc for the letters
152Problem Solving Letters of Rec
- The Eagle Advisor may call the references and
hound, nag etc for a written copy of the letter. - Emails are acceptable
- The Eagle Advisor may speak to the reference on
the telephone and then give a summary to the
Board of Review. - Hard copy of the recommendation is not required
153Board of Review Rules
- A scout may sit for a Board of Review after his
18th Birthday so long as all of the application
and project is signed prior to him becoming 18
154- A Scout must sit for the Board of review no
longer than 90 days after his 18th Birthday - If it is greater than 90 days he must petition
the Council Advancement Chairman and explain the
delay
155- If it is past 6 months the scout must petition
National BSA and explain the delay. National
will then decide whether the scout may sit for a
Board of Review.
156GOOD LUCK
- May the Force be with You!