Enhancement and new Functions

1
SIMATIC Software
S7-GRAPH V5.2

• Enhancement and new Functions

2
S7-GRAPH V5.2

• The consistency check of STEP 7 may be used for
  S7-GRAPH blocks nowAfter you have modified
  the program, it is now possible in the SIMATIC
  Manager to check the consistancy of S7-GRAPH
  blocks via the Check Block Consistancy
  function.Still existing inconsitencies will be
  controlled and may eliminated via the function
  Block (s) compile.
• reduces the engineering for modification of
  blocks and interfaces
• this allows you to gain control over effects at
  other blocks that result of interface
  modifications as well as modifications in
  the symbol table and to quickly eliminate
  errors

• Consistency check

3
S7-GRAPH V5.2

• The overview window now provides two new
  overviews of the sequential control
• The graphics tab shows individual sequencers
  as well as permanent instructions in a textual
  way
• If required, you canexpand these views
  todisplay more graphicaldetail, e. g.
  thesequencers structure orindividual
  operations.

• New overview

4
S7-GRAPH V5.2

• The sequencer tab shows all sequencers well
  arranged side by side.

• New overview

• This presentation is especially useful for the
  status display.

5
S7-GRAPH V5.2
Enhanced synchronization options

• You now have the choice of two strategies for
  synchronization
• Actual S7-GRAPH highlights all steps whose
  previous transition condition is satisfied and
  the conditions for subsequent transition is not
  satisfied.
• New S7-GRAPH highlights all steps whose
  interlock condition is satisfied and the
  condition for a subsequent transition is not
  satisfied.
• Makes the change between manual and automatic
  mode easier.
• You can select this strategy via
  menucommandOptions gt Application Settings gt
  General

• Synchronization

6
S7-GRAPH V5.2

• Default values for monitoring and delay times
• You can set default values for the addresses
  Si.T and Si.U, you require for the watchdogs.
• Reduced configuring overhead for often used
  monitoring and delay times
• The settings are done viaOptions gt Application
  Settings gt Editor

• Monitoring and delay times

7
S7-GRAPH V5.2

• Enhanced functions for adding symbols
• Depending on the position of the mouse cursor,
  you can now open a context-sensitive menu command
  for assigning symbols to several adresses.
• Menu command Edit Symbols

• Adding symbols

8
S7-GRAPH V5.2

• For displaying the instances of a selected
  address in your program you have the following
  new options

• Double-click on a global address.The S7 program
  searches for opposing instances, that is, for
  write access addresses it performs a search for
  read access addresses and vice versa.
• All instances of local addresses in the S7-GRAPH
  block will be displayed via the menu commandGo
  To gt Previous / Next local use

• Search for address instances

9
S7-GRAPH V5.2

• S7-GRAPH V5.2 supports the jump from WinCC via
  the cross reference list to S7-GRAPH and to the
  still active step in the read-only mode
• allows depending on the user rights the
  read-only access to the detailled sequencer
  and to the active step.

• Jump from WinCC

10
S7-GRAPH V5.2

• New keyboard operations for navigationin the
  sequencer

Function
Keys
To the start of the sequencer
POS 1
To the end of the sequencer
END
To the start of the jump
SHIFTPOS 1
To the end of the jump
SHIFTEND

• New keyboard operations

11
S7-GRAPH V5.2

• Order numbers
• 6ES7 811-0CC05-0YX0 Single License
• 6ES7 811-0CC05-0YX4 Upgrade to V5.2
• 6ES7 811-0CA01-0YX2 Software Update Service
• Date of delivery
• End of 12/2002
• as a separate product and
• as a component of STEP 7 Professional Edition
  12/2002
• Additional information to
• IEC 61131-3,
• PLCopen and
• S7-GRAPH Base Level certification
• You will find in the Internet
  http//www.plcopen.org/

Order numbers,date of delivery and information