Plan pour la fabrication d'une TLB - PowerPoint PPT Presentation

1 / 7
About This Presentation
Title:

Plan pour la fabrication d'une TLB

Description:

Z* W Handles Knob used to lift panel c for pail removal Nailed skates Align handles with BLT s centre of gravity (with receptacle in place) ! – PowerPoint PPT presentation

Number of Views:21
Avg rating:3.0/5.0
Slides: 8
Provided by: Farka5
Learn more at: http://www.eautarcie.org
Category:
Tags: tlb | fabrication | plan | pour | une

less

Transcript and Presenter's Notes

Title: Plan pour la fabrication d'une TLB


1
Large format BLT
Plan adapted by Olivier Vienne (Ecaussines,
Belgium)
Biolitter toilet
Receptacle Stainless steel pail
39.8 cm (15½ in.)
35 cm (13¾ in.)
48 cm (18¾ in.)
35 cm (13¾ in.)
52 cm (20½ in.)
Stainless steel pail costs about 80 to 100
N.B. You build the cabinet around the
receptacle, and not the other way around. It is
therefore wiser to purchase your receptacle
before starting work. The cabinet dimensions
will be adapted to the receptacle size.
2
Outside dimensions
THE PLAN
5-7 cm (2-3 in.)
48 cm (18¾ in.)
52 cm (20½ in.)
39.8 cm (15¾ in.)
38 cm (15 in.)
47 cm (18½ in.)
50.6 cm (20½ in.)
3
Panel cutout sizes
THE PLAN
Panel thickness 18 mm (¾ in.)
48 cm (18¾ in.)
c
52 cm (20½ in.)
3-ply 6 mm (¼ in.)
- Trace and cut out oval according to seat size
and shape by using seat as template. - The hole
must be a bit wider than the seat, for a
proper fit.
y
43.2 cm (17 in.)
43.2 cm (17 in.)
47 cm (18½ in.)
47 cm (18½ in.)
----
y
These measurements depend on the cut-out of panel
c. Adjust receptacle position with respect to
seat position, considering that a deflective
urine baffle will be added inside the oval.
7cm (2¾ in.)
34 cm (13¼ in.) To be adjusted to
outside dimension of receptacle
----
4
Accessories
THE PLAN
- 1 toilet seat with cover - 2 brass or stainless
steel hinges adequate screws - 60 cm (24 in.)
slim chain - 2 handles 1 assorted knob - 4
furniture skates (nailed type) - 180 cm (72 in.)
of 40 x 40 mm (2x2) mitre wood blockings - 15 mm
(5/8 in.) nails - 12 x 40 mm (1½ in.) screws with
appropriately-sized screw plugs. - wood glue -
varnish (preferable)
5
Assembly
THE PLAN
Fix toilet seat to panel c
c
c
Hinges
a
b
b
a
appropriately-sized screw plugs
40 mm (1½ in.) screws
Screw plug
6
Assembly
THE PLAN
W
Panel y (it need not be nailed )?
Wood blocking supports (to be nailed to side
panels)
Panel x ( to be nailed to the underside of
the wood blockings )?
W is a recess to house the receptacles handle.
W must be as small as possible ! (W depends on
your type of receptacle). Z depends on the
receptacle height. If the receptacle is smaller,
panel x will be adjusted accordingly
(positioned higher with respect to the lower edge
of the side panels).
7
Assembly
THE PLAN
Knob used to lift panel c for pail removal
Align handles with BLTs centre of gravity (with
receptacle in place) !
Handles
It is preferable to nail a stainless steel (or
plastic) baffle at front of hole in panel c.
Nailed skates
The deflective baffle is needed to prevent
urinating between the receptacle and the
cabinet, unless your receptacle rests up against
the underside of the toilet seat.
Felt protection
Write a Comment
User Comments (0)
About PowerShow.com