Title: Telechron Master Clocks and Time Distribution
1Telechron Master Clocks and Time Distribution
- Mitchell Janoff
- October 2003
2Largest Blackout in US History Affects over
50,000,000 People and 9,300 Square Miles
- August 14, 2003 Blackout in the northeast
effects 50 million people over 9,300 square miles - Ripple affect due to the interconnection of power
plants across US and Canada cause of problem.
3Times Square
4Grand Central Terminal
5Empire State Building
6Brooklyn Bridge
7Statue of Liberty
8(No Transcript)
9So what does this have to do with Henry Warren????
- Henry Warren is responsible for the modern
International Power Grid due to his early work
in - Frequency stabilization
- Time distribution
- Clock synchronization
- Interconnection between power stations
10Henry Warren and the Introduction of Synchronous
Timekeeping
- How did Warren revolutionize timekeeping in the
US - What obstacles did Warren overcome to accomplish
his goals - How does the synchronous self-starting AC motor
work - How did Warren help power stations to maintain
60Hz - How did Warren convince the power generating
companies to adopt his technology
11What is the Function of a Clock?
- There are two distinct function of all clocks
- 1. Measure time as accurately as possible, and
- 2. Tell time with the greatest possible
convenience
12What is the history of telling time?
- Very early clock makers recognized the
desirability of telling the time over as wide an
area as possible. - Early clocks were typically equipped with bells
to toll the hours. - Now we need to know minutes and seconds in
addition to the hours.
13Time has been Distributed Locally Throughout
History
- Tower Clocks began distributing time in the
1300s. - By the 19th century, the industrial revolution
had made tower clocks regular features on
factories and railroad stations - Standardize timekeeping across the United States
is just over 100 years old.
MetLife Clock Tower New York City
14Western Union and the US Naval Observatory Begin
a Time Service in 1865
- First locally to Washington, DC
- By 1869 to the BO Railroad
- In 1877, Western Union initiated its national
time service - In 1886, Western Unions time service delivered
both time and timepieces.
15On November 18, 1883 Standard Railway Time went
into effect in North America
- Standard Time Replaces Local Time and Railroad
Time, each determined by the position of the sun
in a community or region. - Most large cities immediately adopted the
railroads time system - United States is divided into four time zones
based on the Prime Meridian in Greenwich,
England.
16The Naval Observatory and Western Union Lead the
Way in Time Distribution
- Western Unions time ball in New York City fell
to inaugurate Standard Railway Time based on a
signal telegraphed from the U.S. Naval
Observatory 240 miles away in Washington D.C. - Western Union also flashed a time signal across
the country over its network of telegraph lines.
17Time Signals were Distributed Hourly on the Hour
- Clocks were supplied by the Self Winding Clock
Company of New York - Master clocks in the Western Union network were
automatically corrected once a day at noon. - Western Unions low cost and nationwide
distribution quickly drove the competing time
services out of business.
18The Standard Time Act of 1918 made Standard Time
a Federal Law
- Standard Time introduced a need for synchronized
timekeeping - The United States Naval Observatory is chosen to
maintain and distribute the time due its long
history of time distribution. - Clocks throughout the United States now differ by
only the hours.
19(No Transcript)
20Western Union Time Service is aimed at
Municipalities and Businesses
- Time Service to Individuals is not as well
developed. - In 1883 John Oram, a Dallas Jeweler applies for a
patent on the Oram Time Machine, the Oram Time
Regulator and the Oram Time Indicator. - Orams system signaled the time of day
continuously via a system of coded pulses heard
over the receiver of a telephone.
21Time Distribution over Telephone Lines Fails to
Generate much Interest
- Equipment was expensive for exchanges (5,000)
- Customers refused to pay for a time service
- Bell did not encourage its franchise holders to
make time a fundamental part of the telephone
business
Picture from Selling The True Time Ian R.
Bartkey, Stanford University Press Stanford CA
2000
22Master/Slave Clock Systems were introduced around
the turn of the Century
- Advantage of having all clocks in a building
synchronized - Battery powered and all connected to a master
eliminated the need to set clocks individually - Required separate system of wires
23How was Time Distributed?
- Primary distribution via Telegraph from 1890
- USNO Begins Radio Time Distribution in 1904
- By 1923 Fourteen Stations are in Operation across
the US
Picture from Time and Timekeepers, Willis I.
Milham, The Macmillan Co 1941
24Whats Going on with Electric Clocks in the Early
1900s?
- Electric Clocks were
- more costly
- more delicate
- more likely to get out of order, and
- No better time-keepers than common variety
- While they didnt need winding, batteries were
somewhat uncertain in durability.
25Warrens Attempts at Electric Clocks
- Warren files a patent for battery clocks in 1908
- Started as a hobby, led to a small business
- By 1916 Warren realized that the battery clocks
would never be a commercial success
26So what Problem is Henry Warren Solving?
- While all clocks within the same time zone should
read the same time, each clock operates
essentially independently. - Clocks need to be wound, and set frequently
- Electric clocks are unreliable and no more
accurate than wind-up clocks - Master/Slave clocks solve some of the problems,
but are expensive and complex
27Why Adopt the electrical Network for Timekeeping
- By 1916 there were two independent networks
connecting people in the US. - Telephone network connected the well-to-do and
offices - The light and power lines covered a more
extensive territory - By 1916 More than 90 of all electric light, heat
and power was distributed in the form of
alternating current. - People were thinking about using the electrical
network for timekeeping nobody did anything
about it.
28Warren is the First to Develop a High Torque,
Self-Starting, Synchronous Motor
- 1918 Warren Patents the self starting synchronous
motor after years of experimentation with various
technologies - Type A is an enclosed movement rotating within an
electrical field
29The Telechron Motor is the Best Self-Starting
Synchronous Motor
- Motor is small and compact
- Comes to full speed, under rated load,
instantaneously with no measurable lag - Self-lubricated, rotating parts entirely enclosed
- Unaffected by changes in voltage, current, or
temperature - Can be made to operate on any commercial
frequency or voltage
30(No Transcript)
31(No Transcript)
32Telechron Synchronous Motor
- Previous Motors
- Self-Starting but low torque or not synchronous
- Manual-Starting but high torque and synchronous
- Telechron Motor
- High Torque, synchronous and self-starting
- Single Phase Motor can be installed directly on
the power lines in most homes and businesses
33(No Transcript)
34(No Transcript)
35(No Transcript)
36(No Transcript)
37(No Transcript)
38(No Transcript)
39Early Experiments in 1916 with A-Motor Uncover
Problems
- First experiments show clock to to gain or lose
as much as 10-15 minutes each day. - Warren calls Boston Edison and reports frequency
is off by approximately one-half cycle daily. - Boston Edison checks their laboratory standards
and works closely with Warren
401916 Warren introduces the Master Clock Type A
- Warren is given an opportunity to demonstrate his
regulating instrument, intended to eliminate
errors in frequency - October 23, 1916 Boston Edison puts the Warren
Master Clock into Operation - By the Mid 1920s Telechron clocks were in use by
20 million people
41The Warren A Type Master Clock is a Precision
Regulator
- The Type A is an exceedingly accurate
time-keeper, mounted in a floor standing case - 60-beat pendulum and a Graham dead beat type
escapement and invar pendulum - Clock can be regulated to within one second per
day - Clock main-spring is continuously wound by
synchronous motor
42Type A Master Clock combines Pendulum Regulator
and Synchronous Clock
43Regulation of Pendulum Clock by Weights and
Magnetic Pulse
- Weight Tray on Pendulum Allow Operator to Change
Rate. - Dials in Case allow Operator to add Pull/Push to
Pendulum via Electro-Magnets in Clock Base.
44Although Initially There is a Lack of Interest in
Warrens Clocks
- By 1925 400 Warren Master Clocks have been
installed - By 1947 Warren Master Clocks regulated over 95
of the electric lines in the United States. - From Electrifying Time by Jim Linz
45Warren Introduces the B Type aster in April and
July 1920
46The Warren Type B is a Compact Wall Mounted
Master
- Motor and Clock act on the same index hand
through gearing - The motor tends to drive the hand in one
direction, and the clock in the opposite
direction - If the rate of the clock and motor are the same,
the hand stays at rest - If the motor is fast the hand moves in a
clockwise direction
47Differences between the A and B
- The Type A is recommended for use where the
greatest accuracy and reliability are sought - The Type B may be used in exactly the same
manner and for the same purpose as the Type A
it finds its principal use in smaller plants that
are tied in with a large system
48Warren C Master Frequency Regulator
- Designed in 1920
- Differential Reading on Middle Dial
- Upper dial (with knob) allows adjusting of
seconds of clocks on lines - Lower dial displays the time
49(No Transcript)
50(No Transcript)
51- Weight 13 Hanging on endless belt
52- Weight 13 Hanging on endless belt
- Weight is lowered by pendulum clock
53- Weight 13 Hanging on endless belt
- Weight is lowered by pendulum clock
- Weight is lifted by the synchronous motor left
54- When the line frequency and the pendulum rates
agree, weight remains stationary.
55- When the line frequency and the pendulum rates
agree, weight remains stationary. - If rates disagree, the difference is registered
on the the scale
56- When the line frequency and the pendulum rates
agree, weight remains stationary. - If rates disagree, the difference is registered
on the the scale - When weight is lifted by the synchronous motor,
it closes the switch which reduces the speed of
the generator.
57- When the line frequency and the pendulum rates
agree, weight remains stationary. - If rates disagree, the difference is registered
on the the scale - When weight is lifted by the synchronous motor,
it closes the switch which reduces the speed of
the generator. - As the weight falls the switch is open, and
generator speeds up.
58Henry Warren and the Introduction of Synchronous
Timekeeping
- How did Warren revolutionize timekeeping in the
US - What obstacles did Warren overcome to accomplish
his goals - How does the synchronous self-starting AC motor
work - How did Warren help power stations to maintain
60Hz - How did Warren convince the power generating
companies to adopt his technology
59Power Grid
- The U.S. and Canada (with the exception of Quebec
and most of Texas) are tied together in a single
large power grid. - All generators are synchronized to an exact 60Hz
standard using references calibrated to the NIST
atomic clocks. - Phase matching and power transfer between
networks effected by phase-varying transformers
(a leading phase pushes powers, a trailing phase
pulls it). - On average, though, the finite speed of light
implies 4000/186000 sec propagation delay
between Nova Scotia and San Diego - more than the
16.7ms of a complete 60 Hz wavelength.
60Modern Electric Clocks
- A paper read at a meeting of the Clock Club held
at the Old State House, Boston MA on February 6,
1937