Setting up the SMART Board

1
Setting up the SMART Board
2
Shut down and turn off your computer before
proceeding!
3
Set the SMART board approximately 6 feet from
projector
6 feet
4
Set the pens and eraser in the appropriate trays
5
Locate the SMART board connector
6
Plug the funky-looking end into the serial port
on the computer
Look for this symbol
7
Unplug the keyboard connector from the back of
the computer and plug in the adapter in its place
8
Plug the keyboard connector into the adapter
9
Connect the other end of the SMART board
connector into the SMART board
10
Setting up the Projector
11
Locate the projector connector and power cord
12
Unplug the monitor from the back of the computer.
Plug in the projector connector in its place.
13
Plug the connector from the back of the computer
into the RGB 1 slot..
Plug the connector from the monitor into the RGB
2 slot
14
Plug the power cord in to the projector, then
plug the cord into a power strip.
15
Turn on the main power switch at the back of the
projector, then press the power button on the top
16
Turn on and log in to your computer
17
Orient the SMART board
This process gets the SMART board ready to use
with your computer
18
Adjust the distance between the SMART board and
the projector so that the computer screen fills
the SMART board
19
At your computer, from the SMART board software
menu, select Orient
20
At the SMART board, follow the directions on the
screen to orient (match it up) with the computer