ECO Air Delivery (ULB) TTPs

1

ECO Air Delivery (ULB) TTPs
MMDC initiates supply pull and Calls DASC/TACC
for A/C allocation
LCE (MMDC/MMCC) receives request and determines
delivery mode must go to ACE
DASC/TACC receives DZ GPS coordinates from
Requesting Unit (via chain of command)
Bn determines request must go to LCE
MAGTF Concurs
Company determines request must go Higher
ULB route and drop sequence programmed at ACE
P3 and AD pack and prep loads
Requesting Unit calls for Resupply
P3 and AD move supplies to flight line, and
integrate supplies into ULB
Short Final Check Between Requesting Unit and
ACE, confirming drop time/location
Requesting Unit picks up resupply confirms
receipt via comms
ULB deploys resupplies
ULB launches
ULB RTB
2

ECO UAS CASEVAC TTPs (Decentralized)
Approve Or Modify
Bn Monitors
DASC/TACC Air Controller coordinates with PET
Co Monitors
Air Controller Allocates A/C and Notifies
Requesting Unit
Requesting Unit Identifies LZ, and Calls
DASC/TACC for Medevac
Manned helicopter preps for pickup at txfr point
Air Controller Programs UAS Flight Mission
Casualty Transfer Occurs
Point of Injury
UAS Takes Off for Txfr point, tracked by DASC/TACC
Manned A/C Goes Airborne to txfr point
UAS Goes Airborne
Requesting Unit Hits Go Away Button confirms
CASEVAC via comms
Short Final Check Between Requesting Unit and
Air Controller
Patient is Loaded
UAS Lands
Vetted through Squad Fires and CLOC 11/19/08
3
ECO UAS CASEVAC TTPs (Centralized)
DASC/TASC Air Controller coordinates with PET
Bn Calls DASC/TACC for Medevac
Company calls Bn
Air Controller Allocates A/C and Notifies
Requesting Unit
Requesting Unit Identifies LZ, and Calls Company
for Medevac
Air Controller Programs UAS Flight Mission
Manned helicopter preps for pickup at txfr point
UAS RTB
Point of Injury
Casualty Transfer Occurs
Manned A/C Goes Airborne to txfr point
UAS Takes Off for Txfr point, tracked by DASC/TACC
UAS Goes Airborne
Short Final Check Between Requesting Unit and
Air Controller
Requesting Unit Hits Go Away Button confirms
CASEVAC via comms
UAS Lands
Patient is Loaded
Vetted through Squad Fires and CLOC 11/21/08
4
ECO UGV CASEVAC TTPs
Requesting Unit Identifies LZ, and Calls Company
for Medevac
DASC/TASC Air Controller coordinates with PET
Company Calls DASC/TACC for Medevac
UGV Evac to LZ Reqd
Bn monitors and Calls DASC/TACC for Medevac
Point of Injury
Air Controller Allocates A/C and Notifies
Requesting Unit
Requesting Unit loads casualty on UGV for mvmt to
LZ
UGV moves to LZ
Manned helicopter preps for pickup at txfr point
A/C Short Final Check with requesting unit
A/C Goes Airborne
Patient is Trans-Loaded
A/C Takes Off
UGV Returns to Requesting Unit
5

ECO UGV Distribution TTPs
LCE P3 packs, preps supply package
LCE receives request and initiates supply pull
and internal request for transportation.
UGV is driven (either by driver overriding remote
system, or teleoperated within close vicinity of
vehicle) to Supply Staging Lot and supply package
is loaded onto UGV
LCE MT coordinates and plans convoy per MCRP
4-11.3F (Convoy Operations Handbook) and local
unit SOPs, with the exceptions and modifications
in Appendix K (Draft) of MCRP 4-11.3F
LCE informs Requesting Unit of details on resupply
Bn can not fill request, request goes to LCE
Determination made that ground delivery via UGV
is required and UGV is allocated
UGV departs LCE CLA
Company can not fill request, request goes Higher
Communications between UGV Operator and owners of
convoy route battle space
Requesting Unit calls for Resupply
UGV departs for next delivery point
Short Final Check Between UGV Operator and
Requesting Unit
UGV returns to LCE CLA
UGV Operator gives green light to Requesting Unit
to manually control UGV
Requesting Unit gives green light to UGV Operator
to depart area
Requesting Unit Manually Drives UGV to pick up
point
Requesting Unit Manually Drives UGV to unload
point
UGV enters Requesting Units battle space and UGV
Operator places UGV in safe mode.
Requesting Unit unloads vehicle