Title: Thermofluid 1
1Thermofluid 1
- Introduction to Transport Phenomena Conduction
Heat Transfer - Prof. Dongsik Kim
21. Introduction
- Transport phenomena
- Thermodynamics
- Concerns initial and final states (not the
process) - 1st law of thermodynamics ? energy conservation
- 2nd law ? direction of energy transport
- Transport phenomena
- Fluid mechanics ? rate of momentum transport
- Momentum in transit due to velocity gradient
- Heat transfer? rate of thermal energy transport
- Energy in transit due to temperature gradient
3Symbols and units
- Thermal energy EJ
- Heat transfer rate qWJ/s
- Heat transfer rate per unit length q/LW/m
- Heat transfer rate per unit length q/A W/m2
- Temperature ToC or K T(oC)T(K)273.15
- Note When oC or K unit is in the denominator,
unit change doesn't affect the numerical value,
e.g., specific heat Cp 1 J/kg.oC1 J/kg.K,
thermal conductivity 1 W/m.oC1 W/m.K
4Mechanisms of transport
- Diffusion
- Carriers molecules, atoms (crystal lattices),
electrons - translation, vibration, and rotation
in a random fashion. - Mass, momentum, and thermal energy (heat or
microscopically the kinetic energy of the
particles) diffusion from the region of high
potential to the region of low potential until an
equilibrium state is reached. - Fluids- molecular random motion
- Solids - lattice vibration and motion of free
electrons
5Transport by diffusion
6Convection
- Transport with "bulk" or "macroscopic" flow
- Transport is not determined only by the random
particle motion (diffusion) but also by the bulk
fluid motion. - Transport by bulk flow is termed as advection or
convection in a narrow meaning - Convection Conduction Bulk energy transport
(advection) - (ex) HT between a solid object and fluid or HT in
a moving fluid
7Convective transport
8Radiation
- Thermal energy transport in the form of EM
(electromagnetic) wave is called thermal
radiation. Note that mass can not be transported
by radiation. - Thermal energy is emitted by EM wave (light) due
to the changes in electron configurations of
matter. The EM wave emission is always present
for surfaces at temperatures greater than
absolute 0 K.
9Review
- (Q1) Are the three modes diffusion, convection,
and radiation independent of each other? If not,
how are they related? - (Q2) Show examples of heat, mass, and momentum
transfer. Identify the mechanisms.
10Methodology
- Conservation principle Physical model
- Review (Q3) What is the conservation principle
for a control surface (infinitesimally thin
control volume)?
11Microscopic view
- Characteristic length scales
- MFP (mean free path) average distance a particle
travels without a collision - Energy carriers
- Phonon quantum of lattice vibration energy
- Electron
- Photon quantum of EM energy
12Understanding diffusion by kinetic theory
13Comparison with macroscopic observation
- Thermal conductivity
- In general, ksolgtkliqgtkgas (Fig. 2.4)
- Solid
- k(k by electron motion) (k by lattice
vibration) - Good electrical conductors are good thermal
conductors as well (Wiedemann-Franz law) - Well order materials (crystals) are good thermal
conductors in comparison with amorphous materials - Gas
- In general, kgas ? as T ? because v? as T ?
- Insensitive to P and r. (n ? as P, r ? but l ? as
P, r ?)
142. Heat transfer fundamentals
- Fourier's law and thermal conductivity
- Â
- HT rate a vector from high T to low T
- Direction of HT perpendicular to isothermal
surfaces - kk(T, P)
- Often kk(T) (Incropera Figs. 2.5 - 2.7)
- In general, thermal conductivity depends on the
direction. If the material is isotropic, k is
independent of direction and a constant.
Otherwise, second-order tensor kij - How to measure thermal conductivity
15Thermal conductivity
16(No Transcript)
17(No Transcript)
18(No Transcript)
19Fouriers law
- HT (area) ? (Temperature difference) /
(distance) - HT rate is proportional to the temperature
gradient - Minus sign (-) denotes the direction of heat
flow. - Ficks law and bianary diffusion coefficient
- Shear-law and viscosity
20Newtons law of cooling
- HT with "bulk" or "macroscopic" motion of fluid
(HT between a solid object and fluid or HT in a
moving fluid) - Convection Conduction Bulk energy transport
(advection) - Convection Conduction on the wall (no slip BC).
- Classification
- Forced convection external means
- Natural or free convection self-induced flow by
buoyancy - HT (area) ? (Temperature difference) ?
(convection heat transfer coefficient) - Convection heat transfer coefficient h fn (fluid
properties, flow speed, geometry, etc.)
21Convection heat transfer coefficients
- Â HT in liquid gt HT in gas (material property,
kliqgtkgas, etc) - Aluminum k202 W/m.K, water 0.6, air 0.026
- Effect of latent heat critical
22Stefan-Boltzmann law of radiation
- Energy transportation by EM (electromagnetic)
wave - Thermal energy is emitted by the changes in
electron configurations of matter - Emission is always present at temperatures
greater than absolute 0 K - No medium required
- Important in high-temperature HT, solar energy
utilization, space applications, etc. - EM wave can be visible (light) at high
temperature - Energy emitted by a surface per unit area
(emissive power) T4
23Radiation heat transfer
- Blackbodymaximum value of thermal radiation at a
given absolute temperature - Stefan-Boltzmann constant s5.67?10-8 W/m2K4, e
emissivity (01) - Experimental implementation of a blackbody
isothermal cavity (material independent) - A small object surround by large surroundings at
Tsur, (AltltAsur) Â
24Review
- (Q1) While thermal conductivity is a material
property given as a function of thermodynamic
state, heat transfer coefficient h is not a
material property. What is the relation between k
and h? - (Q2) What are the typical values of thermal
conductivity for common materials? - (Q3) When is radiation heat transfer important?
Give a quantitative answer. - (Q4) A woman informs her engineer husband that
hot water will freeze faster than cold water.
He calls this statement nonsense. She answers by
saying that she has actually timed the freezing
process for ice trays in the home refrigerator
and found that hot water does indeed freeze
faster. As a friend, you are asked to settle the
argument. Is there any logical explanation for
the womans observation? (J. P. Holman, Prob.
1-35)
25Governing equation (review)
26Conduction equation
- Cartesian
- Cylindrical
- Spherical
27Initial and Boundary Conditions
- Initial condition initial temperature
distribution - Boundary conditions are assigned from physical
observation of the domain boundary - BC of the 1st kind known temperature boundary
condition, e.g., phase-change interface,
temperature controlled surface - BC of the 2nd kind known heat-flux boundary
condition, e.g., or , insulated surface - (insulated)
- Mixed BC when a surface is exposed to air and
neither temperature nor heat flux is known - Phase-change interface
28Review
- (Q1) For problems involving constant thermal
properties and temperature boundary conditions,
according to the governing equation, the
temperature profile is independent of thermal
conductivity. It depends only on thermal
diffusivity. The thermal conductivity of iron is
about 3000 times larger than that of air but the
thermal diffusivity of iron is approximately
equal to that air. How come can the temperature
profile be the same? Is this puzzle related with
dynamic viscosity vs. (kinematic) viscosity? - (Q2) What are the implicit assumptions the
diffusion equation is based on? - (Q3) (Advanced problem) In heat conduction
equation, is the heat capacity Cp or Cv? Why? Can
you derive the governing equation from the 1st
law of thermodynamics, i.e.,
?
293. Solutions of 1-d steady conduction equation
- Steady ?
- 1-d ?
- The governing equation thus reduces to
- If thermal conductivity is constant
- linear profile
- Note For prescribed temperatures at the two
boundaries, T is independent of material
properties. What is going on?
30(No Transcript)
31Thermal resistance
- Analogy between heat transfer and electricity
- ?
- Â
- Definition of thermal resistance, overall heat
transfer coefficient - Thermal resistance of a plate K/W
- Thermal resistance of a cylinder
- Thermal resistance of a sphere
- Convection thermal resistance m2.K/W
- Thermal contact resistance
32Thermal contact resistance
33(No Transcript)
34Equivalent thermal circuit
35Critical thickness of insulation layer
Thickness of the insulation layer that maximizes
(minimizes) heat transfer?
36(No Transcript)
374. 1-d steady conduction II
- Variable thermal conductivity, cross-sectional
area - In 1-d steady state HT, heat flux is conserved.
- Direct integration of Fourier's law
- (Ex1) Thermal conductivity (a,bgt0)
- (Ex2)
38Conduction with internal heat generation
39Example
- T(x)? TsT(l)?
- Method 1
- Method 2
40Heat generation in a cylinder and a sphere
- Cylinder
- Governing equation
- BC's
- Heat flux increases linearly with r
- Temperature profile?
- Sphere of radius r0
- Similarly,
415. Extended surfaces
- Heat transfer enhancement
- Natural convection
- Forced convection
- Extended surfaces
- Phase change
- Fins
42Fin analysis
- Deriving a governing equation
- Steady-state, constant cross-sectional area
43Solutions to fin equations
44Fin performance
- Fin resistance
- Fin effectiveness
- HT with a fin vs. HT without a fin
- Fin efficiency
- HT with a fin vs. HT with an ideal fin
- What is an ideal fin?
45Fins of nonuniform cross-sectional area
46(No Transcript)
47Review
- (Q1) In order to use the simple solution for an
infinitely long fin, how long should a fin be? - (Q2) In the above analysis, it is assumed that
the temperature is uniform over the
cross-sectional area of a fin. Discuss the
validity of the assumption.
486. Introduction to transient heat transfer problem
- Governing equation
- Thermal conductivity vs. thermal diffusivity
- Dimensionless parameters
- Biot number
- conduction thermal resistance vs. convection
thermal resistance - Fourier number
- Dimensionless time
- Rate of heat conduction vs. rate of heat storage
for t (thermal diffusivity heat conduction /
heat storage)
49Dimensionless form of governing equation
50Lumped heat capacitance method
- Neglecting spatial distribution of temperature
T(t) - Validity of the lumped heat capacitance analysis
small Bi
51Review
- (Q1) In the above cooling problem, the lumped
body experiences a negligibly small temperature
change after sufficient time has elapsed. What is
the characteristic time (time constant)? - (Q2) What is the physical meaning of very
large/small Fourier number?
527. Solutions of 1-d transient heat conduction
equation
- ltInitial temperature Ti, suddenly exposed to
ambient temperature T? with convection heat
transfer coefficient hgt
53Analytical solutions
- Slab of thickness 2L Â
- Cylinder of radius r0
- Sphere of radius r0
54(No Transcript)
55Semi-infinite wall
- Similarity solution
- Similarity variable
- Temperature profiles at different moments are
similar by scaling the position by some function
of time f(t) - PDE in x and t ? transform ? ODE in h
- Initial temperature Ti, constant temperature Ts
at the boundary x0 - Initial temperature Ti, constant heat flux at
the boundary x0
56Temperature profiles
57Thermal penetration depth
- Exact solution
- Scaling of governing equation
58Other related topics
- Analogy with Stokes problem of momentum
diffusion - Sudden thermal contact of two infinite bars at
different temperatures (TAi, TBi)
59Review
- (Q1) A metal surface feels colder than a wood
surface when touched, though they are at the same
temperature. Why? - (Q2) (Advanced topic) Can you define the speed of
thermal wave using the concept of thermal
penetration depth? How is the thermal wave
different from the shock wave?
608. Analytical methods for multidimensional heat
transfer problems
- Separation of variables
- Most common technique
- Trial solution
- Some math
- Eigenvalue problem
- Strum-Liouville theorm
- Details (Incropera pp. 163-167)
61(No Transcript)
62(No Transcript)
63- Are these steps crystal clear?
- Need more details?
- H.S. Carslaw and J.C. Jaeger, 1996, Conduction of
Heat in Solids, Oxford - M. Necati Ozisik Heat Conduction John Wiley
Sons -
64Integral method
- Write integral form of the governing equation
- Construct an approximate solution satisfying the
boundary conditions - Substitute the approximate solution
- An example fin problem
65Other analytical methods (advanced)
- Greens function
- Superposition using diffusion delta
- Integral transform
- Use of Laplace transform, Fourier transform
669. Numerical methods for multidimensional heat
transfer problems
- Finite difference schemes
67(No Transcript)
68(No Transcript)
69(No Transcript)
70(No Transcript)
71Finite difference solutions
72 73(No Transcript)
74(No Transcript)
75Numerical experiment
- Java Applets for Engineering Education
- http//www.engapplets.vt.edu/
- A set of NSF-funded applets (primarily fluids and
heat transfer) for web-based tutoring of simple
Heat Transfer problems - Try web surfing for heat transfer
- http//www.engr.colostate.edu/allan/heat_trans/pa
ge4/page4f.html - http//www.oilsurvey.com/EngToolkit/Process/heatma
sstransfer.htm -
- FEHT (Finite Element Heat Transfer)
- S.A. Kleins FEM package for HT education