Programming with TCP/IP

1
Programming with TCP/IP

• Ram Dantu

2
Client Server Computing

• Although the Internet provides a basic
  communication service, the protocol software
  cannot initiate contact with, or accept contact
  from, a remote computer. Instead, two application
  programs must participate in any communication
  with one application initiates communication and
  the one accepts it.

3

• In network applications, a SERVER application
  waits passively for contact after informing local
  protocol software that a specific type of message
  is expected, while a CLIENT application initiates
  communication actively by sending a matched type
  of message.

4
Identifying A Particular Service

• Transport protocols assign each service a unique
  identifier.
• Both client and server specify the service
  identifier protocol software uses the identifier
  to direct each incoming request to the correct
  server.
• In TCP/IP, TCP uses 16-bit integer values known
  as protocol port numbers to identify services.

5
Concurrent Server

• Concurrent execution is fundamental to servers
  because concurrency permits multiple clients to
  obtain a given service without having to wait for
  the server to finish previous requests.
• In concurrent server designs, the server creates
  a new thread or process to handle each client.
• Transport protocols assign an identifier to each
  client as well as to each service.
• Protocol software on the servers machine uses
  the combination of client and server identifiers
  to choose the correct copy of a concurrent server.

6
The Socket API

• The interface between an application program and
  the communication protocols in an operating
  system (OS) is known as the Application Program
  Interface or API.
• Sockets provide an implementation of the SAP
  (Service Access Point) abstraction at the
  Transport Layer in the TCP/IP protocol suite,
  which is part of the BSD Unix.

7

• A socket library can provide applications with a
  socket API on an operating system that does not
  provide native sockets (e.g. Windows 3.1). When
  an application calls one of the socket
  procedures, control passes to a library routine
  that makes one or more calls to the underlying OS
  to implement the socket function.
• A socket may be thought of as a generalization of
  the BSD Unix file access mechanism
  (open-read-write-close) that provides an
  end-point for communication.

8
Functions needed

• Specify local and remote communication endpoints
• Initiate a connection
• Wait for incoming connection
• Send and receive data
• Terminate a connection gracefully
• Error handling

9
Socket system calls for connection-oriented proto
col
10
(No Transcript)
11

• Data communication between two hosts on the
  Internet require the five components of what is
  called an association to be initialized
  protocol,local-addr, local-process,
  foreign-addr, foreign-process
• The different system calls for sockets provides
  values for one or more of these components.

12
Socket system call

• The first system call any process wishing to do
  network I/O has to call is the socket system
  call.
• int sockfd socket (int family, int type, int
  protocol)
• Examples of Family include
• AF_UNIX
• AF_INET
• Examples of Type include
• SOCK_STREAM
• SOCK_DGRAM
• SOCK_RAW

13

• The protocol argument is typically zero, but may
  be specified to request an actual protocol like
  UDP, TCP, ICMP, etc.
• The socket system call just fills in one element
  of the five-tuple weve looked at - the protocol.
  The remaining are filled in by the other calls as
  shown in the figure.

14
protocol
15
Specifying an Endpoint Address

• Remember that the sockets API is generic
• There must be a generic way to specify endpoint
  addresses
• TCP/IP requires an IP address and a port number
  for each endpoint address.
• Other protocol suites(families) may use other
  schemes.
• Generic socket addresses
• (The C function that make up the sockets API
  expect structures of type sockaddr.)
• struct sockaddr
• unsigned short sa_family
  //specifies the address type
• char sa_data14
  //specifies the address value

16
AF_INET--TCP/IP address

• For AF_INET we need
• 16 bit port number
• 32 bit IP address (IPv4 only)
• struct sockaddr_in
• short sin_family
• unsigned short sin_port
• struct in_addr sin_addr
• char sin_zero8
• how these fields to be set and interpreted?

17
Network Byte Order Functions

• Example
• struct sockaddr_in sin
• sin.sin_family AF_INET
• sin.sin_port htons(9999)
• sin.sin_addr.s_addr inet_addr
• unsigned short htons(unsigned short)
• unsigned short ntohs(unsigned short)
• unsigned long htonl(unsigned long)
• unsigned long ntohl(unsigned long)

18
Bind System Call

• The bind system call assigns an address to an
  unnamed socket. Example
• int bind(int sockfd, struct sockaddr_in myaddr,
  int addrlen)

19

• The bind system call provides the values for the
  local_addr and local_process elements in the
  five_tuple in an association.
• An address for the Internet domain sockets is a
  combination of a hostname and a port number, as
  shown below
• struct sockaddr_in
• short sin_family /typically AF_INET/
• u_short sin_port / 16 bit port number, network
  byte ordered /
• struct in_addr sin_addr / 32 bit netid/hostid,
  network byte ordered /
• char sin_zero8 / unused/

20
Connect/Listen/Accept System Calls

• Connect
• A client process connects a socket descriptor
  after a socket system call to establish a
  connection with the server.
• int connect(int sockfd, struct sockaddr_in
  servaddr, int addrlen)
• For a connection-oriented client, the connect
  (along with an accept at the server side) assigns
  all four addresses and process components of the
  association.

21

• Listen
• The listen system call is used by a
  connection-oriented server to indicate it is
  willing to receive connections.
• int listen(int socket, int qlength)
• allows servers to prepare a socket for incoming
  connections
• puts the socket in a passive mode ready to accept
  connections
• informs the OS that the protocol software should
  enqueue multiple simultaneous requests that
  arrive at the socket
• applies only to sockets that have selected
  reliable stream delivery service

22

• Accept
• After the connection-oriented server executes a
  listen, it waits for connection requests from
  client(s) in the accept system call, e.g.,
  newsockfd accept(sockfd, peer, addrlen)
• needs to wait for a connection
• blocks until a connection request arrives
• addrlen is a pointer to an integer
• when a request arrives , the system fills in
  argument addr with the address of the client that
  has placed the request and sets addrlen to the
  length of the address.
• system creates a new socket, returns the new
  socket descriptor

23

• accept returns a new socket descriptor, which has
  all five components of the association specified
  - three (protocol, local addr, local_process) are
  inherited from the existing sockfd (which
  however has its foreign address and process
  components unspecified, and hence can be re-used
  to accept another request. This scenario is
  typical for concurrent servers.

24
Sending and Receiving Data

• Heres how you might read from a socket
• num_read read(sockfd, buff_ptr, num_bytes)
• And heres how you read from an open file
  descriptor in Unix
• num_read read(fildes, buff_ptr, num_bytes)
• There are other ways (with different parameters)
  to send and receive data read, readv, recv,
  recvfrom, recvmsg to receive data through a
  socket and write, writev, send, sendto, sendmsg
  to send data through a socket.

25
sendto()--UDP Sockets

• int sendto(int socket, char buffer, int length,
  int flags,
  struct sockaddr destination_address, int
  address_size)
• For example
• struct sockaddr_in sin
• sin.sin_family AF_INET
• sin.sin_port htons(12345)
• sin.sin_addr.s_addr inet_addr("128.227.22.43")
• char msg "Hello, World"
• sendto(s, msg, strlen(msg)1, 0, (struct sockaddr
  )sin, sizeof(sin))

26
recvfrom()--UDP Sockets

• Int recvfrom(int socket, char buffer, int
  length, int flags, struct
  sockaddr sender_address, int
  address_size)
• For example
• struct sockaddr_in sin
• char msg10000
• int ret
• int sin_length
• sin_length sizeof(sin)
• ret recvfrom(s, msg, 10000, 0, (struct sockaddr
  )sin, sin_length)
• printf("d bytes received from s (port d)\n",
  ret, inet_ntoa(sin.sin_addr),
  sin.sin_port)

27
send() and recv() -- TCP Sockets

• int send(int s, const char msg, int len, int
  flags)
• connected socket
• argument flags controls the transmission.
• allows the sender to specify that the message
  should be sent out-of- band messages correspond
  to TCPs urgent data
• allows the caller to request that the message be
  sent without using local routine tables (take
  control of routine)
• int recv(int s, char buf, int len, int flags)
• connected socket
• argument flags allow the caller to control the
  reception
• look ahead by extracting a copy of the next
  incoming message without removing the message
  from the socket

28
close() and shutdown()

• close(int socket)
• For UDP sockets, this will release the ownership
  on the local port that is bound to this socket
• For TCP, this will initiate a two-way shutdown
  between both hosts before giving up port
  ownership.
• shutdown(int socket, int how)
• f the how field is 0, this will disallow further
  reading (recv) from the socket.
• If the how field is 1, subsequent writes (send)
  will be disallowed. The socket will still need to
  be passed to close.

29
Relationship Between Sockets and File Descriptors

• Socket handles are integer values. In UNIX,
  socket handles can be passed to most of the
  low-level POSIX I/O functions.
• read(s, buffer, buff_length) //s could be a
  file descriptor too
• write(s, buffer, buff_length)
• Calling read on an open socket is equivalent to
  recv and recvfrom
• if the socket is UDP, then information about the
  sender of the datagram will not be returned
• Similarly the write function call is equivalent
  to send and sendto
• UDP sockets may call connect to use send and
  write
• use the socket library functions instead of the
  file I/O equivalents.

30
Utility Functions

• unsigned int inet_addr(char str)
• str represents an IP address(dotted-quad
  notation) inet_addr will return it's equivalent
  32-bit value in network byte order.
• This value can be passed into the sin_addr.s_addr
  field of a socketaddr_in structure
• -1 is returned if the string can not be
  interpreted
• char inet_ntoa(struct in_addr ip)
• Converts the 32-bit value which is assumed to be
  in network byte order and contained in ip to a
  string
• The pointer returned by inet_ntoa contains this
  string. However, subsequent calls to inet_ntoa
  will always return the same pointer, so copying
  the string to another buffer is recommended
  before calling again.

31
Utility Functions ( contd )

• int gethostname(char name, int length)
• Copies the name (up to length bytes) of the
  hostname of the local computer into the character
  array pointed to by name
• struct hostent gethostbyname(char strHost)
• int select (int nfds, fd_set readfds, fd_set
  writefds, fd_set exceptfds, const struct
  timeval timeout)

32
Others

• Include files
• include ltsys/types.hgt include
  ltsys/socket.hgt include ltnetinet/in.hgt
  include ltarpa/inet.hgt include
  ltnetdb.hgt include ltunistd.hgt inclu
  de ltsignal.hgt include ltstdio.hgt
  include ltfcntl.hgt
  include lterrno.h include
  ltsys/time.hgt include ltstdlib.hgt inclu
  de ltmemory.hgt
• Compiling and Linking
• Under most versions of UNIX (Linux, BSD, SunOS,
  IRIX) compiling is done as usual
• gcc my_socket_program.c -o my_socket_program
• Solaris
• cc my_socket_program.c -o my_socket_program
  -lsocket -lnsl
• Programming tips
• always check the return value for each function
  call
• consult the UNIX on-line manual pages ("man") for
  a complete description

33
Summary

• Network Application Programming Interface (API)
• TCP/IP basic
• UNIX/C Sockets
• socket() bind() connect() listen()
  accept() sendto() recvfrom() send() recv()
  read() write()
• some utility functions
• Java Socket API