Through hole chages to threaded hole(M2, M2.6, M3). Taping type has adsorption cap for vacuum pick. It needs to be removed after reflow. Material: Brass Finish: Sn plating over Ni Current rating TH-1.6-M2: 20ATH-1.6-M2.6: 20ATH-1.6-M3: 30A Tightening

1
Can change through hole to threaded hole !!
Threaded Inserts (TH series)
TH Series Change to through hole
TH Series Change to through hole
THB Series Change to non threaded inserts
THC Series Change to non threaded inserts
Structure
TH Series
Cream Solder
PCB
Copper Foil
TH Series Mounting Process
1.On PCB land, apply Cream solder. By Mounter,
put the parts
2.Reflow
3.Remove adsorption caps
SHINDENKIZAI sdk_at_mac8sdk.co.jp
2
Threaded Inserts TH series
Through hole is changed to threaded
hole(M1.0,M1.2,M1.4,M1.7,M2, M2.6, M3). Taping
type has adsorption cap for vacuum pick. It needs
to be removed after reflow. Material Brass
Finish Sn plating over Ni Recommended PCB
Thickness1.6t for TH-1.6 Series, 0.8t for TH-0.8
Series Recommended Metal Mask Thickness150-200µ

Current Capacity Tightening Torque
TH-0.8-M1.0 10A
TH-0.8-M1.2 12A
TH-0.8-M1.4 12A
TH-1.6-M1.6 15A
TH-1.6-M1.7 15A
TH-1.6-M2 20A
TH-1.6-M2.6 20A
TH-1.6-M3 30A
TH-0.8-M1.0 0.3kgf-cm(2.94N-cm)and below
TH-0.8-M1.2 0.6kgf-cm(5.88N-cm)and below
TH-0.8-M1.4 1.0kgf-cm(9.8N-cm)and below
TH-1.6-M1.6 1.5kgf-cm(14.7N-cm)and below
TH-1.6-M1.7 1.5kgf-cm(14.7N-cm)and below
TH-1.6-M2 1.5kgf-cm(14.7N-cm)and below
TH-1.6-M2.6 3kgf-cm(29.4N-cm)and below
TH-1.6-M3 X-dire 5kgf-cm(49N-cm)and below
TH-1.6-M3 Y-dire 3kgf-cm(29.4N-cm)and below
P/N A B C D M Package
TH-0.8-M1.0 2.5 1.6 0.7 0.5 M1.0P0.25 1000/reel
TH-0.8-M1.2 2.5 1.8 0.7 0.5 M1.2P0.25 1000/reel
TH-0.8-M1.4 2.7 2.0 0.7 0.7 M1.4P0.3 1000/reel
TH-1.6-M1.6 3.0 2.2 1.5 0.3 M1.6P0.35 900/reel
TH-1.6-M1.7 3.0 2.3 1.5 0.3 M1.7P0.35 900/reel
TH-1.6-M2 4.0 2.5 1.5 0.3 M2P0.4 900/reel
TH-1.6-M2.6 4.5 3.1 1.5 0.3 M2.6P0.45 900/reel
TH-1.6-M3 5.0 3.5 1.5 0.3 M3P0.5 900/reel
we can provide the bulk type Mounter should
have automatic recognition system
SHINDENKIZAI sdk_at_mac8sdk.co.jp
3
Threaded Inserts TH-0.8 series
Stand-off type threaded inserts. This is mounted
on PCB by inserting into through-hole. Screws
can be inserted from both component and solder
side. Taping type has adsorption cap for vacuum
pick. It needs to be removed after reflow.
Mounter should have automatic recognition
system. Bulk type (100pcs/pack) is
available.Recommended PCB Thickness 0.8-1.5t
Current Capacity Tightening
Torque
TH-0.8-?-M2 20A
TH-0.8-?-M2.6 20A
TH-0.8-?-M3 30A
TH-0.8-?-M2 1.5kgf-cm (14.7N-cm) and below
TH-0.8-?-M2.6 3kgf-cm (29.4N-cm) and below
TH-0.8-?-M3 X dire 5kgf-cm (49N-cm) and below
TH-0.8-?-M3 Y dire 3kgf-cm (29.4N-cm) and below
P/N A B H M Package
TH-0.8-1.0-M2 4.0 2.5 1.0 M2 450/reel
TH-0.8-1.5-M2 4.0 2.5 1.5 M2 450/reel
TH-0.8-2.0-M2 4.0 2.5 2.0 M2 450/reel
TH-0.8-2.5-M2 4.0 2.5 2.5 M2 350/reel
TH-0.8-3.0-M2 4.0 2.5 3.0 M2 350/reel
TH-0.8-3.5-M2 4.0 2.5 3.5 M2 350/reel
TH-0.8-4.0-M2 4.0 2.5 4.0 M2 250/reel
TH-0.8-4.5-M2 4.0 2.5 4.5 M2 250/reel
TH-0.8-5.0-M2 4.0 2.5 5.0 M2 250/reel
TH-0.8-1.0-M2.6 4.5 3.1 1.0 M2.6 450/reel
TH-0.8-1.5-M2.6 4.5 3.1 1.5 M2.6 450/reel
TH-0.8-2.0-M2.6 4.5 3.1 2.0 M2.6 450/reel
TH-0.8-2.5-M2.6 4.5 3.1 2.5 M2.6 350/reel
TH-0.8-3.0-M2.6 4.5 3.1 3.0 M2.6 350/reel
TH-0.8-3.5-M2.6 4.5 3.1 3.5 M2.6 350/reel
TH-0.8-4.0-M2.6 4.5 3.1 4.0 M2.6 250/reel
TH-0.8-4.5-M2.6 4.5 3.1 4.5 M2.6 250/reel
TH-0.8-5.0-M2.6 4.5 3.1 5.0 M2.6 250/reel
TH-0.8-5.5-M2.6 4.5 3.1 5.5 M2.6 350/reel
TH-0.8-6.0-M2.6 4.5 3.1 6.0 M2.6 350/reel
TH-0.8-6.5-M2.6 4.5 3.1 6.5 M2.6 300/reel
TH-0.8-7.0-M2.6 4.5 3.1 7.0 M2.6 300/reel
TH-0.8-7.5-M2.6 4.5 3.1 7.5 M2.6 300/reel
TH-0.8-8.0-M2.6 4.5 3.1 8.0 M2.6 300/reel
P/N A B H M Package
TH-0.8-1.2-M3 5.0 3.5 1.2 M3 450/reel
TH-0.8-1.5-M3 5.0 3.5 1.5 M3 450/reel
TH-0.8-2.0-M3 5.0 3.5 2.0 M3 450/reel
TH-0.8-2.5-M3 5.0 3.5 2.5 M3 350/reel
TH-0.8-3.0-M3 5.0 3.5 3.0 M3 350/reel
TH-0.8-3.5-M3 5.0 3.5 3.5 M3 350/reel
TH-0.8-4.0-M3 5.0 3.5 4.0 M3 250/reel
TH-0.8-4.5-M3 5.0 3.5 4.5 M3 250/reel
TH-0.8-5.0-M3 5.0 3.5 5.0 M3 250/reel
TH-0.8-5.5-M3 5.0 3.5 5.5 M3 350/reel
TH-0.8-6.0-M3 5.0 3.5 6.0 M3 350/reel
TH-0.8-6.5-M3 5.0 3.5 6.5 M3 300/reel
TH-0.8-7.0-M3 5.0 3.5 7.0 M3 300/reel
TH-0.8-7.5-M3 5.0 3.5 7.5 M3 300/reel
TH-0.8-8.0-M3 5.0 3.5 8.0 M3 300/reel
TH-0.8-8.5-M3 5.0 3.5 8.5 M3 250/reel
TH-0.8-9.0-M3 5.0 3.5 9.0 M3 250/reel
TH-0.8-9.5-M3 5.0 3.5 9.5 M3 250/reel
TH-0.8-10-M3 5.0 3.5 10 M3 250/reel
SHINDENKIZAI sdk_at_mac8sdk.co.jp
4
Threaded Inserts TH-1.6 series
Stand-off type threaded inserts. This is mounted
on PCB by inserting into through-hole. Screws
can be inserted from both component and solder
side. Taping type has adsorption cap for vacuum
pick. It needs to be removed after reflow.
Mounter should have automatic recognition
system. Bulk type (100pcs/pack) is
available.Recommended PCB Thickness 1.6t and
above
Current Capacity Tightening
Torque
TH-1.6-?-M2 20A
TH-1.6-?-M2.6 20A
TH-1.6-?-M3 30A
TH-1.6-?-M2 1.5kgf-cm (14.7N-cm) and below
TH-1.6-?-M2.6 3kgf-cm (29.4N-cm) and below
TH-1.6-?-M3 X dire 5kgf-cm (49N-cm) and below
TH-1.6-?-M3 Y dire 3kgf-cm (29.4N-cm) and below
P/N A B H M Package
TH-1.6-0.5-M2 4.0 2.5 0.5 M2 450/reel
TH-1.6-1.0-M2 4.0 2.5 1.0 M2 450/reel
TH-1.6-1.5-M2 4.0 2.5 1.5 M2 450/reel
TH-1.6-2.0-M2 4.0 2.5 2.0 M2 450/reel
TH-1.6-2.5-M2 4.0 2.5 2.5 M2 350/reel
TH-1.6-3.0-M2 4.0 2.5 3.0 M2 350/reel
TH-1.6-3.5-M2 4.0 2.5 3.5 M2 350/reel
TH-1.6-4.0-M2 4.0 2.5 4.0 M2 250/reel
TH-1.6-4.5-M2 4.0 2.5 4.5 M2 250/reel
TH-1.6-5.0-M2 4.0 2.5 5.0 M2 250/reel
TH-1.6-0.5-M2.6 4.5 3.1 0.5 M2.6 450/reel
TH-1.6-1.0-M2.6 4.5 3.1 1.0 M2.6 450/reel
TH-1.6-1.5-M2.6 4.5 3.1 1.5 M2.6 450/reel
TH-1.6-2.0-M2.6 4.5 3.1 2.0 M2.6 450/reel
TH-1.6-2.5-M2.6 4.5 3.1 2.5 M2.6 350/reel
TH-1.6-3.0-M2.6 4.5 3.1 3.0 M2.6 350/reel
TH-1.6-3.5-M2.6 4.5 3.1 3.5 M2.6 350/reel
TH-1.6-4.0-M2.6 4.5 3.1 4.0 M2.6 250/reel
TH-1.6-4.5-M2.6 4.5 3.1 4.5 M2.6 250/reel
TH-1.6-5.0-M2.6 4.5 3.1 5.0 M2.6 250/reel
TH-1.6-5.5-M2.6 4.5 3.1 5.5 M2.6 350/reel
TH-1.6-6.0-M2.6 4.5 3.1 6.0 M2.6 350/reel
TH-1.6-6.5-M2.6 4.5 3.1 6.5 M2.6 300/reel
TH-1.6-7.0-M2.6 4.5 3.1 7.0 M2.6 300/reel
TH-1.6-7.5-M2.6 4.5 3.1 7.5 M2.6 300/reel
TH-1.6-8.0-M2.6 4.5 3.1 8.0 M2.6 300/reel
P/N A B H M Package
TH-1.6-0.5-M3 5.0 3.5 0.5 M3 450/reel
TH-1.6-1.0-M3 5.0 3.5 1.0 M3 450/reel
TH-1.6-1.5-M3 5.0 3.5 1.5 M3 450/reel
TH-1.6-2.0-M3 5.0 3.5 2.0 M3 450/reel
TH-1.6-2.5-M3 5.0 3.5 2.5 M3 350/reel
TH-1.6-3.0-M3 5.0 3.5 3.0 M3 350/reel
TH-1.6-3.5-M3 5.0 3.5 3.5 M3 350/reel
TH-1.6-4.0-M3 5.0 3.5 4.0 M3 250/reel
TH-1.6-4.5-M3 5.0 3.5 4.5 M3 250/reel
TH-1.6-5.0-M3 5.0 3.5 5.0 M3 250/reel
TH-1.6-5.5-M3 5.0 3.5 5.5 M3 350/reel
TH-1.6-6.0-M3 5.0 3.5 6.0 M3 350/reel
TH-1.6-6.5-M3 5.0 3.5 6.5 M3 300/reel
TH-1.6-7.0-M3 5.0 3.5 7.0 M3 300/reel
TH-1.6-7.5-M3 5.0 3.5 7.5 M3 300/reel
TH-1.6-8.0-M3 5.0 3.5 8.0 M3 300/reel
TH-1.6-8.5-M3 5.0 3.5 8.5 M3 250/reel
TH-1.6-9.0-M3 5.0 3.5 9.0 M3 250/reel
TH-1.6-9.5-M3 5.0 3.5 9.5 M3 250/reel
TH-1.6-10-M3 5.0 3.5 10 M3 250/reel
SHINDENKIZAI sdk_at_mac8sdk.co.jp
5
Threaded Inserts THB series
Non-threaded type inserts for PCB through-hole.
PCB is mounted above the chassis by inserting
screws from the component side of PCB to tapped
holes on the chassis. Taping type has adsorption
cap for vacuum pick. It needs to be removed after
reflow. Bulk type (100pcs/pack) is
available.Bulk type does not have adsorption
cap. Material Brass Finish Sn plating over
Ni Recommended PCB Thickness 1.6t
P/N A B C L H Package
THB-1.5-2 4.5 3.0 2.1 1.5 0.0 400/reel
THB-2.1-2 4.5 3.0 2.1 2.1 0.5 400/reel
THB-2.6-2 4.5 3.0 2.1 2.6 1.0 400/reel
THB-3.1-2 4.5 3.0 2.1 3.1 1.5 400/reel
THB-3.6-2 4.5 3.0 2.1 3.6 2.0 400/reel
THB-4.1-2 4.5 3.0 2.1 4.1 2.5 400/reel
THB-4.6-2 4.5 3.0 2.1 4.6 3.0 200/reel
THB-5.1-2 4.5 3.0 2.1 5.1 3.5 200/reel
THB-5.6-2 4.5 3.0 2.1 5.6 4.0 200/reel
THB-6.1-2 4.5 3.0 2.1 6.1 4.5 200/reel
THB-6.6-2 4.5 3.0 2.1 6.6 5.0 200/reel
THB-1.5-2.6 5.0 3.6 2.7 1.5 0.0 400/reel
THB-2.1-2.6 5.0 3.6 2.7 2.1 0.5 400/reel
THB-2.6-2.6 5.0 3.6 2.7 2.6 1.0 400/reel
THB-3.1-2.6 5.0 3.6 2.7 3.1 1.5 400/reel
THB-3.6-2.6 5.0 3.6 2.7 3.6 2.0 400/reel
THB-4.1-2.6 5.0 3.6 2.7 4.1 2.5 400/reel
THB-4.6-2.6 5.0 3.6 2.7 4.6 3.0 200/reel
THB-5.1-2.6 5.0 3.6 2.7 5.1 3.5 200/reel
THB-5.6-2.6 5.0 3.6 2.7 5.6 4.0 200/reel
THB-6.1-2.6 5.0 3.6 2.7 6.1 4.5 200/reel
THB-6.6-2.6 5.0 3.6 2.7 6.6 5.0 200/reel
THB-1.5-3 5.5 4.0 3.1 1.5 0.0 400/reel
THB-2.1-3 5.5 4.0 3.1 2.1 0.5 400/reel
THB-2.6-3 5.5 4.0 3.1 2.6 1.0 400/reel
THB-3.1-3 5.5 4.0 3.1 3.1 1.5 400/reel
THB-3.6-3 5.5 4.0 3.1 3.6 2.0 400/reel
THB-4.1-3 5.5 4.0 3.1 4.1 2.5 400/reel
THB-4.6-3 5.5 4.0 3.1 4.6 3.0 200/reel
THB-5.1-3 5.5 4.0 3.1 5.1 3.5 200/reel
THB-5.6-3 5.5 4.0 3.1 5.6 4.0 200/reel
THB-6.1-3 5.5 4.0 3.1 6.1 4.5 200/reel
THB-6.6-3 5.5 4.0 3.1 6.6 5.0 200/reel
SHINDENKIZAI sdk_at_mac8sdk.co.jp
6
Threaded Inserts THC1.6 series
Stand-off type non-threaded inserts. This is
mounted on PCB by inserting into through-hole.
Taping type has adsorption cap for vacuum pick.
It needs to be removed after reflow. Mounter
should have automatic recognition system. Bulk
type (100pcs/pack) is available.Bulk type does
not have adsorption cap. Material Brass
Finish Sn plating over Ni Recommended PCB
Thickness 1.6t and above
P/N A B C H Package
THC-1.6-0.5-2 4.5 3.0 2.1 0.5 450
THC-1.6-1.0-2 4.5 3.0 2.1 1.0 450
THC-1.6-1.5-2 4.5 3.0 2.1 1.5 300
THC-1.6-2.0-2 4.5 3.0 2.1 2.0 300
THC-1.6-2.5-2 4.5 3.0 2.1 2.5 250
THC-1.6-3.0-2 4.5 3.0 2.1 3.0 250
THC-1.6-3.5-2 4.5 3.0 2.1 3.5 200
THC-1.6-4.0-2 4.5 3.0 2.1 4.0 200
THC-1.6-4.5-2 4.5 3.0 2.1 4.5 400
THC-1.6-5.0-2 4.5 3.0 2.1 5.0 400
THC-1.6-5.5-2 4.5 3.0 2.1 5.5 350
THC-1.6-6.0-2 4.5 3.0 2.1 6.0 350
THC-1.6-6.5-2 4.5 3.0 2.1 6.5 300
THC-1.6-7.0-2 4.5 3.0 2.1 7.0 300
THC-1.6-7.5-2 4.5 3.0 2.1 7.5 300
THC-1.6-8.0-2 4.5 3.0 2.1 8.0 300
THC-1.6-0.5-2.6 5.0 3.6 2.7 0.5 450
THC-1.6-1.0-2.6 5.0 3.6 2.7 1.0 450
THC-1.6-1.5-2.6 5.0 3.6 2.7 1.5 300
THC-1.6-2.0-2.6 5.0 3.6 2.7 2.0 300
THC-1.6-2.5-2.6 5.0 3.6 2.7 2.5 250
THC-1.6-3.0-2.6 5.0 3.6 2.7 3.0 250
THC-1.6-3.5-2.6 5.0 3.6 2.7 3.5 200
THC-1.6-4.0-2.6 5.0 3.6 2.7 4.0 200
THC-1.6-4.5-2.6 5.0 3.6 2.7 4.5 400
THC-1.6-5.0-2.6 5.0 3.6 2.7 5.0 400
THC-1.6-5.5-2.6 5.0 3.6 2.7 5.5 350
THC-1.6-6.0-2.6 5.0 3.6 2.7 6.0 350
THC-1.6-6.5-2.6 5.0 3.6 2.7 6.5 300
THC-1.6-7.0-2.6 5.0 3.6 2.7 7.0 300
THC-1.6-7.5-2.6 5.0 3.6 2.7 7.5 300
THC-1.6-8.0-2.6 5.0 3.6 2.7 8.0 300
THC-1.6-8.5-2.6 5.0 3.6 2.7 8.5 250
THC-1.6-9.0-2.6 5.0 3.6 2.7 9.0 250
THC-1.6-9.5-2.6 5.0 3.6 2.7 9.5 250
THC-1.6-10-2.6 5.0 3.6 2.7 10.0 250
You can order THC-0.8 Series
P/N A B C H Package
THC-1.6-0.5-3 5.5 4.0 3.1 0.5 450
THC-1.6-1.0-3 5.5 4.0 3.1 1.0 450
THC-1.6-1.5-3 5.5 4.0 3.1 1.5 300
THC-1.6-2.0-3 5.5 4.0 3.1 2.0 300
THC-1.6-2.5-3 5.5 4.0 3.1 2.5 250
THC-1.6-3.0-3 5.5 4.0 3.1 3.0 250
THC-1.6-3.5-3 5.5 4.0 3.1 3.5 200
THC-1.6-4.0-3 5.5 4.0 3.1 4.0 200
THC-1.6-4.5-3 5.5 4.0 3.1 4.5 400
THC-1.6-5.0-3 5.5 4.0 3.1 5.0 400
THC-1.6-5.5-3 5.5 4.0 3.1 5.5 350
THC-1.6-6.0-3 5.5 4.0 3.1 6.0 350
THC-1.6-6.5-3 5.5 4.0 3.1 6.5 300
THC-1.6-7.0-3 5.5 4.0 3.1 7.0 300
THC-1.6-7.5-3 5.5 4.0 3.1 7.5 300
THC-1.6-8.0-3 5.5 4.0 3.1 8.0 300
THC-1.6-8.5-3 5.5 4.0 3.1 8.5 250
THC-1.6-9.0-3 5.5 4.0 3.1 9.0 250
THC-1.6-9.5-3 5.5 4.0 3.1 9.5 250
THC-1.6-10-3 5.5 4.0 3.1 10.0 250
SHINDENKIZAI sdk_at_mac8sdk.co.jp