Title: Intersection 15: The End
1Intersection 15 The End
2The Final Exam Questions
- Electron configurations, atomic structure,
periodic trends, atomic orbitals. - Quantitative calculations.
- Lewis VSEPR Structures and polarity.
- Thermochemistry
- Thermochemistry
- Thermochemistry
- Acid/Base chemistry
- Acid/Base chemistry
- Oxidation number
- Redox reactions
- Redox reactions
- Electrochemistry
3Research at the University of MichiganA unique
opportunity in your life
For Help Finding Research Labs
- Women in Science and Engineering (WISE)
- http//www.wise.umich.edu/
- Undergraduate Research Opportunities Program
- http//www.lsa.umich.edu/urop/
- Your future class professors
- Dr. Gottfried and Dr. Banaszak Holl
- Send specific request with information about
yourself and interests (CV). Use contacts.
Blanket emails not great approach.
4Outline
- Vitamin C note
- Electrochemistry
- Nernst
- Ampere
- Electrolytic cells
- Environmental
- Hybrid cars
5Vitamin C
- Which fruit keeps best over a long period of
time? - Fruits known to sailors
- Orange, lemon 1400
- Limes 1638
- Shaddock (grapefruit) 1700
- Used lemon or lime juice preserved in brandy
6M
Nernst
Picture from www.corrosion-doctors.org/
Biographies/images/
7Is potential always the same?
M
Standard conditions 1 atm, 25oC, 1 M What will
influence the potential of a cell?
8Mathematical Relationships Nernst
M
The Nernst Equation Eo standard potential
of the cell R Universal gas constant 8.3145
J/molK T temperature in Kelvin n number of
electrons transferred F Faradays constant
96,483.4 C/mol Q reaction quotient
(concentration of anode divided by the
concentration of the cathode)
E Eo - RT ln Q nF
Cu2 Zn(s) ? Zn2 Cu(s) Q
9Applying the Nernst Equation
M
Cu2 Zn(s) ? Zn2 Cu(s)
This cell is operating at 25oC with 1.00x10-5M
Zn2 and 0.100M Cu2? Predict if the voltage
will be higher or lower than the standard
potential
E Eo - RT ln Q nF
10Cu2 Zn(s) ? Zn2 Cu(s)
M
E Eo - RT ln Q nF
Zn2 2e- -gt Zn -0.76 V Cu2 2e- -gt
Cu 0.34 V
Eo standard potential of the cell R Universal
gas constant 8.3145 J/molK T temperature in
Kelvin n number of electrons transferred F
Faradays constant 96,483.4 C/mol Q reaction
quotient (concentration of anode divided by the
concentration of the cathode)
25oC 273 K
n
1.00x10-5M Zn2 and 0.100M Cu2
Q Zn2/Cu2
11Were your predictions correct?
M
12A
Ampere
Picture from musee-ampere.univ-lyon1.fr/
13The Units of Electrochemistry
A
- Coulomb
- 1 coulomb equals 2.998 x 109 electrostatic units
(eu) - eu is amount of charge needed to repel an
identical charge 1 cm away with unit force - Charge on one electron is -1.602 x 10-19 coulomb
Problem An aluminum ion has a 3 charge.
What is this value in coulombs? magnitude
of charge is same at that of e-, opposite
sign 3 x 1.602 x10-19 4.806 x 10-19
coulomb Key Point electrons or ions charges
can be measured in coloumbs
14The Units of Electrochemistry
A
- Ampere
- Amount of current flowing when 1 coulomb passes
a given point in 1 second - Units of Amperes are Coulombs per second
- Current (I) x time (C/s x s) gives an amount of
charge.
Problem How much current is flowing in a wire in
which 5.0 x 1016 electrons are flowing per
second? The charge transferred each second
(5.0 x 1016 electrons/sec) x (1.602 x 10-19
coulomb/electron) 8.0 x 10-3 coulombs/sec
amps
15The Units of Electrochemistry
A
- Ampere
- Amount of current flowing when 1 coulomb passes
a given point in 1 second - Units of Amperes are Coulombs per second
- Current (I) x time (C/s x s) gives an amount of
charge. - We can express electron or ION flow in amps!
Problem If 1 mol Al3 ions passes a given point
in one hour, what is the current flow?
1 mol Al 3 ions 6.022 x 1023 Al 3 ions 4.806 x 10-19 coulomb 1 hour
Hour 1 mol Al 3 ions 1 Al3 ion 3600 sec
80 C/s 80 A
16- From Moore, Stanitski, and Jurs Chemistry
The Molecular Science 2nd Edition/
17Batteries
A
- Primary Cells
- non-reversible, non-rechargeable electrochemical
cell - "dry" cell alkaline cell 1.5 v/cell
- mercury cell 1.34 v/cell
- fuel cell 1.23v/cell
- Secondary Cells
- reversible, rechargeable electrochemical cell
- Lead-acid (automobile battery) 2 v/cell
- NiCad 1.25 v/cell
- Lithium batteries
18Flash Light Batteries
A
- Primary Cells
- "Dry" Cell
- Zn(s) 2 MnO2(s) 2 NH4 ?
- Zn2(aq) 2 MnO(OH)(s)
2 NH3 - Alkaline Cell
- Zn(s) 2 MnO2(s) ? ZnO(s) Mn2O3(s)
19Leclanche Dry Cell
A
20Mercury Battery
A
Zn(s) HgO(s) ? ZnO(aq) Hg(l)
21Fuel Cells
A
- anode
- H2(g) 2 OH-(aq) ? 2 H2O(l)
2 e- - cathode
- O2(g) 2 H2O(l) 4 e- ? 4 OH-(aq)
Picture from http//www.bpa.gov/Energy/N/project
s/fuel_cell/education/fuelcellcar/
22Lead-Acid (Automobile Battery)
A
Secondary Cell
- Pb(s) PbO2(s) 2 H2SO4 2 PbSO4(s) 2
H2O
2 v/cell thus 12 volt battery 6-2 volt cells
23Nickel-Cadmium (Ni-Cad)
A
- Secondary Cell
- Cd(s) 2 Ni(OH)3(s) ? Cd(OH)2(s) Ni(OH)2(s)
24Lithium Batteries
M
- Lithium batters (developed in 1970 used in
watches, pacemakers, etc.) - The 4-volt lithium battery, which has up to 33
percent higher energy density and 60 less weight
than a nickel-metal hydride battery of the same
size, has made possible the miniaturization of
the current generation of electronic devices
25Lithium chemistry
M
- What is the ½ reaction involving lithium?
- Is this a reduction or oxidation reaction?
- Does it take place at the anode or cathode?
26The other ½ of the battery
M
- Co3 e- ? Co2 (1.92 V)
- What is the standard potential of the cell?
- Li e- ? Li (-3.045 V)
- A lithium battery has a potential listed at 4V.
Does this differ from the number you calculated?
Why?
27Alternative Anodes
M
- Which elements would you predict to have
oxidation potentials similar to lithium? - (no peeking at the table of standard reduction
potentials!) - Is what way is lithium preferable to these
elements?
28Alternative Cathodes
M
- Co3 e- ? Co2
- Disadvantage Use of cobalt oxide can lead to
thermal runaway. Increased temperature and
pressure cause case of battery to break and fumes
are released. Lithium is exposed to oxygen and
hydrogen in the air. - What are the alternatives and why arent they
being used in conjunction with lithium to build a
battery with higher potential?
29Table of Standard Reduction Potentials
M
Eo Eo
F2 2e- --gt 2F- 2.87 Fe3 3e- ---gt Fe -0.04
Co3 e- --gt Co2 1.80 Pb2 2e- ---gt Pb -0.13
Cl2 2e- ---gt 2Cl- 1.36 Ni2 2e- ---gt Ni -0.25
O2 4H 4e- -gt 2H2O 1.23 Co2 2e- ---gt Co -0.29
Hg2 2e- ---gt Hg 0.85 Cr3 e- ---gt Cr2 -0.40
Ag e- ---gt Ag 0.80 Fe2 2e- ---gt Fe -0.41
I2 2e- ---gt 2I- 0.54 Zn2 2e- ---gt Zn -0.76
Cu e- ---gt Cu 0.52 Mn2 2e- ---gt Mn -1.18
2H 2e- ---gt H2 0.00 Al3 3e- ---gt Al -1.66
30Other commercially viable batteries
M
- Besides cobalt, two other reduction reactions
used in lithium batteries are shown below. What
is the potential of these batteries? - Fe2 2e- ? Fe (-0.41 V)
- ½ I2 e- ? I- (0.54 V)
31Other cathode reactions being explored
M
- Al and Mg are also being explored as materials
for the cathode. What are the advantages and
disadvantages of these materials?
32A
33Corrosion A Case of Environmental
Electrochemistry
A
- Facts about formation of rust
- Iron does not rust in dry air moisture must be
present - Iron does not rust in air-free water O2 must be
present - The loss of iron and the deposition of rust often
occur at different places on the same object - Iron rusts more under acidic conditions (low pH)
- Iron rusts more quickly in contact with ionic
solutions - Iron rusts more quickly in contact with a less
active metal (such as Cu) and more slowly in
contact with a more reactive metal (such as Zn)
34Balance the Redox Reaction
- Fe(s) O2 (g) ? Fe2(aq) H2O(l) in acid
35Corrosion A Case of Environmental
Electrochemistry
A
- O2(g) 4 H(aq) 4 e- gt 2 H2O(l)
Eo 1.23 V - Fe(s) gt Fe2(aq)
2 e- Eo 0.44 V - 2 Fe(s) O2(g) 4 H(aq) gt 2 H2O(l)
Fe2(aq) -
Eo 1.67 V
2Fe2(aq) ½O2(g) (2n)H2O(l) ? Fe2O3.nH2O(s)
4H(aq)
36Corrosion A Case of Environmental
Electrochemistry
A
37A
- During the reconstruction of the Statue of
Liberty, Teflon spacers were placed between the
iron skeleton and the copper plates that cover
the statue. What purpose do these spacers serve?
Cu2 2e- ? Cu 0.153 V Fe2 2e- ?
Fe -0.44 V
38Hybrid Cars
M
39Electrochemistry and the Honda Civic
M
The battery in the 2004 Honda Civic is rated for
6.0 Ampere-hours. If the electric motor draws 42
amps to accelerate from 0 to 60 mph, and the time
required is 15 seconds. The Honda Civic battery
is a nickel metal hydride battery. The
half-reaction for generating the electrical
current is MH OH- ? M H2O e- How
much metal (assume its nickel) is produce on
accelerating from zero to 60?
42 C 15 sec 1 mole e- 1 mol Ni 58.69 g Ni 0.38 g Ni
sec 96, 487 C 1 mole e- 1 mol Ni
40Hybrid Cars Can We PowerUsing Sunlight and Fuel
Cells?
M
41Some Needed Data
M
- The Toyota Prius can generate 100 Amps
- Lets assume our commute requires on average at
20 max current for 1 hour. - A 1 m2 solar cell array can generate 3 amps in
full summer sunlight -
- Questions
- If the electrical power was generated with a fuel
cell, how much hydrogen would be consumed? How
much volume would be required at 1 atm pressure
to hold the hydrogen? - Assume you can place 10 m2 of solar cells on your
car. How long would it take to generate the
needed hydrogen assuming full summer sunlight?
421. Hydrogen Consumption
M
At the anode (where oxidation occurs) 2 H2 (g)
4 H2O (l) ? 4 H3O (aq) 4 e- At the cathode
(where reduction occurs) O2 (g) 2 H2O (l)
4e- ? 4 OH- (aq) Overall reaction 2 H2(g) O2
? 2 H2O (l)
Average 20 of maximum power 20 amps 20 amps x
3600 secs 72,000 coulombs
72,000 C 1 Faraday 1 mol electrons 2 mol H2 0.37 mol H2
96,487 C 1 Faraday 4 mol electrons
V nRT/P (0.37 x 0.08206 x 300) / 1 9 Liters
432. Hydrogen Generation
M
A 1 x 1 m2 solar panel generates a peak current
of 3 amps. Our car with 10 m2 of solar panels
could generate 30 amps.
Electrolysis of water generates hydrogen with the
following half-reaction At the cathode (where
reduction occurs) 4 H3O (aq) 4 e- ? 2 H2 (g)
4 H2O (l)
0.37 mol H2 4 mol e- 1 Faraday 96, 487 C sec 1 hour 0.66 h
2 mol H2 1 mol e- 1 Faraday 30 C 3600 sec
44Issues Arising
M
- Can generate hydrogen from water quickly enough
to supply average demand by fuel cell. - Important since solar cells cannot supply peak
current flow used in Prius of 100 amps. - Where to store hydrogen??
- As water is good. High density storage.
- Molarity??
- 110 M
- As gas is bad, requires too much space ( 9 L)
- Need good storage materials!! (Active research in
Yaghi group)
45(No Transcript)
46Evaluations
- Please fill out both an evaluation for Dr.
Banaszak Holl and Dr. Gottfried and put them in
the correct envelopes! - Constructive comments very helpful!
Thanks for a great semester!