AP (Access Point)

1
PowerLink CPE PL-CPE-22NAP to Client Setup
AP (Access Point)
Client
Operation ModeBridge Mode AP IP Address
192.168.1.254 DHCP Server
Operation ModeBridge Mode Client IP Address
192.168.1.253 DHCP Disable
2
AP setup
1.
2.
3.
3
AP Setup
4.
5. Select AP Mode
6. Create your AP name
7.
4
AP Setup
8.
9. Select Encryption
10. Enter your password
Note skip this page if you dont need to set up
encryption
5
AP Setup
11.
12. Default IP is 192.168.1.254
13. Default DHCP is Server
14.
6
Client Setup
1.
2.
3.
7
Client Setup
4.
5.Select Client Mode
6. Set a different name to AP
7.
8
Client Setup
8.
9. Select same encryption as AP
10. Same password as AP
Note Skip this page if there is no encryption
setup on AP
9
Client Setup
11.
12. Set IP to 192.168.1.253
13. Disable DHCP
14.
10
Client Setup
17. Select the name of the AP appears under SSID
15.
16. Refresh to find surrounding AP
18. Click Connect once you have selected the AP
you wish to connect,