Multi-band Inter/Intra Team Radio (AN/PRC-148)

1
Multi-band Inter/Intra Team Radio (AN/PRC-148)
2
Task

• Navigate yourself though the MBITR functions.
• Properly fill the 148-MBITR.
• Properly hand jam frequencies.
• Perform a proper radio check.

3
Conditions

• Class room environment.
• Risk is high.
• In case of a rocket attack, go down stairs to the
  TOC.

4
Standards

• Given the proper equipment, You, the individual
  must successfully perform your tasks within 10
  minuets.

5
Equipment Inspection

• Check for any visible damages, or anything that
  might cause damages to
• the equipment or
• personnel.

6
Controls, Connectors Indicators
7
System Components
8
MBITR - Interoperability
KL43 and KY99 ANDVT
VHF/UHF AM Clear, VINSON ECCM
VHF FM Clear, VINSON Fascinator
Low Band VHF FM Clear, VINSON ECCM
UHF FM Clear BID420
UHF FM Clear Fascinator
9
Power up your MBITR

• Make sure your ON/OFF switch is on the off
  position before connecting the battery to the
  radio.

10
Description

• 30-512 MHz AM and FM Transceiver
• VHF FM/AM
• UHF AM (Air to Ground)
• UHF FM (LOS)
• UHF FM (Public Service).
• Embedded US Type 1 COMSEC
• Transmit Output Power
• User Selectable 0.1 - 5.0 Watts
• Emergency Beacons and GPS
• AM Swept Tone Beacon
• GPS Interface to PLGR
• 100 Memory Programmable Channels

11

• Once your radio has powered up. Your display
  screen will display the battery power, the group,
  channel and the mode in which the radio is
  currently functioning under.

12

• Press GR on your Key Pad.
• By pressing GR on your Key Pad this will bring
  you to your GROUP MENU.

13

• Select any group you would like to have your
  frequency under.
• There are 10 groups in each radio.
• Each group consist of 16 channels
• Theres a total of 160 channels.

14
Comsec Fills

• Simultaneously press ALT and MODE on your key
  pad.
• Using your arrow up key, circle Key Fill and
  press enter.
• Circle COMSEC and press enter.
• Press your PTT button (Push To Talk) to initiate
  your fill.

15
Hand Jamming Settings

1. Press ALT and Mode at the same time.
2. Circle program and press enter.
3. Circle Radio Config and press enter.
4. Using your arrow keys, circle the Portion that
   you would like to change on the Radio Config
   menu.
5. Once you have circled your selection, press
   enter.

16
HAND JAMMING

• 6. By pressing enter your selection has been
  highlighted.
• 7. Using your arrow keys you can now select your
  desired function.
• 8. When typing in the frequencies, you must press
  ALT and one of the arrow keys to shift from right
  to left.

17
HAND JAMMING

• Note You must enter in your RX Freq. first
  before you type in your TX Freq.

18

• Questions???????????????????????????