PJ2T Standard CW Keying Configurations

1
USB
Stereo Phone Plug
Key 1
RCA
RCA
RCA
PC USB
Winkeyer USB
FT-1000 or FT-2000 rear Key jack
Mini StereoPlug
Paddle
or
056 A1A R-Type OFF
RCA
WinkeyerConfiguration
or
RCA
RCA
1 ft cable
Logikeyer
FT-2000front key jack
056 A1A F-Type ELE
Stereo Phone Plug
RCA
RCA
RCA
PC LPT1Adapter
FT-1000 or FT-2000 rear Key jack
FT-2000front key jack
056 A1A R-Type OFF
056 A1A F-Type ELE
RCA
Paddle
RCA
RCA
ManualConfiguration
1 ft cable
or
Logikeyer
Mini StereoPlug

• NOTES
• At Station 1, shifting to Manual
  configuration requiressacrificing the LPT1 port
  from the band decoder to the LPT1 adapter and
  informing Writelog of this change.
• For LPT1 adapters with hardwired cables instead
  offemale phono jacks, use a double female
  adapter onthe end used to connect to what was
  previously theWinkeyer phono plug. Tape the
  adapter on and keep thecable stored with the
  LPT1 adapter.
• The Omni VI, IC-765, FT-100, and FT-2000 require
  adaptersfor the paddle to a large phone plug.
  Also, adapters will beneeded so that the Yaesu
  large Key phone plug can be plugged into a
  mini stereo jack.
• All keyers and keying assets and adapters will be
  stored together in a blue box.

• OBJECTIVES
• Winkeyer Configuration Have Winkeyer
  capabilityavailable at all stations and also a
  Logikeyer at allstations so we can do CW without
  the computerrunning and for those preferring to
  send with theLogikeyer.
• Manual Configuration Have the ability to
  quickly revert to the basic of a Logikeyer at
  each station with PC keying via an LPT1 adapter.

PJ2T Standard CW Keying Configurations 20 August
2007Updated 15 October 2010