Title: Power frequency Magnetic field Immunity IEC61000-4-8 ?????????
1Power frequency Magnetic field Immunity
IEC61000-4-8?????????
2Typical Occurrence
- Conductors with high currents ?????
- Motors ??
- Generators ???
- Electrical equipment
- ????
- Transformer Leakage
- ?????
3Typical effect ??????
????
4Power-Magnetic Fields Characteristics ???????
- Field frequency equal to frequency of power
supply system ???????????? - Field strength up to more than 100 A/m
- ??????100??
5Testing Setup ????
INA 701
Modula 6000
EUT
0.1 m thickness Insulating Support 10cm???????
MFO 6502
?????
Ground Reference Plane
6MFO 6502 ?????
- Automatic magnetic field option
- Driven from Modula master controller using PDA
or WIN Modula software - ??Modula ?Win Modula ???PDA?????
- Connection to antenna loop using banana sockets
????????????? - External Amp meter can be used to monitor the
generated field - ???????????????
- H Coil factor X I (????X??)
- H Generated field (?????)
- I Current flowing through antenna loop (
?????????)
7Technical specifications
Total Harmonic Distortion (THD) ????? lt 8 ( nominal lt3,5 at full range )
Frequency ?? Selectable 50 Hz and 60 Hz /- 3
Range Low ??? 80 mA to 400 mA into INA702 ( Cf 9,8) gt allows 0,8 A/m to 4 a/m 80 mA to 440 mA into INA701 ( Cf 0,89 ) gt allows 0,08 to 0,4 A/m
Range High ??? 200mA to 4,1 A into INA702 (Cf 9,8) gt allows 2 A/m to 40 A/m 200mA to 4,1 A Into INA701 ( Cf 0,89 ) gt allows 0,2 A/m to 3,6 A/m
Supply Voltage ???? 90 to 240 V
Power consumption ???? lt 150 W
Operating temperature 5 40 degrees centigrade
Overload protection ???? By temperature sensor on power stage
Weight ?? 4 kg approx.
Dimensions ?? 195 mm x 180 mm x 380 mm
CF ????
8INA 701??????
- Magnetic field loop ??????
- 1 X 1 meter
- Coil factor 0.89 ????
- Field strengths up to 3.6 A/m for power
frequency fields - ??????????3.6A/m
- Used with magnetic field generator, MFO 6501/6502
- ??MFO 6501/6502 ????
- When doing testing, EUT is to be placed in the
center of the loop - ??????????????????????
- Field strength can be monitored via a magnetic
field meter - ????????????
9Installation ??
- Connect MFO 6502 power IN to mains.
?????MFO6502????? - Remove 25 pin interlock connector at rear panel
of Modula Master Controller. ?Modula????25 pins
interlock ????? - Connect the interlock connector to X2 of MFO
6502. - ?interlock?????? MFO6502? x2 ?
- Connect Master Controller 25 pin output to MFO
6502 X1 plug, using system interface cable
delivered with MFO 6502. - ????????25pin ???MFO6502x1??
- Connect MFO 6502 to Loop Antenna INA 701.
- Power On MFO 6502.
- Power On Modula main frame.
10Power magnetic field testing terms
- Field Field strength, unit is A/m
- Frequency Power frequency, 50Hz
- Step duration Duration of testing
11??
- ???Immersion method
-
- ?EUT???????????????????
- ???Proximity Method
- ??????????????EUT???,?EUT???????
- ??????
-
12???????
?? ??? ??? ?????(1-3s) ?????(1-3s)
A/m(??) uT A/m(??) uT
1 1 1.26 - -
2 3 3.78 - -
3 10 12.6 - -
4 30 37.8 300 378
5 100 126 1000 1260
x ?? ?? ?? ??
13- ????
- ??50Hz??????????????????????????
- ????? 1A/m ??,1A/m ??????????????1.26uT
14????
- ???????
- 1.?????????
- ????1m x1m ???????1M?????????????????????3dB??,?
?????0.6x0.6x0.5m(h) - 2.???????-???????,??????????
- ????,??????????????,??0.8M????????????????3dB??
,0.6m x 0.6m x1m(h) ??????????? - 3.?????????????? ??????EUT???????????,????EUT,???
?????????EUT?????????EUT???????,??????????????(???
?60 x 60)????(?????????50)???,????? - ?????EUT??25-30cm
15Power Frequency Magnetic Field Immunity Test
with MFO 6501 INA 702?????????IEC 61000-4-8
16MFO 6501 ???????
- Manual magnetic field option
- Rotary hand-wheel for current control
- ????????
- Low / High current range selector
- ?/????????
- 50Hz / 60Hz frequency selector
- 50/60Hz ?????
- Connection to antenna loop using banana sockets
???????????? - External Amp meter can be used to monitor the
generated field ?????????????? - H Coil factor X I ??????x ??
- H Generated field
- I Current flowing through antenna loop
- ?????????
17INA 702
- Magnetic field loops
- 1 X 1 meter
- Coil factor 9.8
- Fitted with POWER plug
- Field strengths up to 40 A/m
- Used with MFO 6501/6502 for IEC 61000-4-8
testing - When doing testing, EUT is to be placed in the
center of the loop - Field strength can be monitored by a magnetic
field meter
18Installation
- Connect MFO 6501 to INA 702 loop
- Insure that POWER plug is fitted
- Connect MFO 6501 to mains.
- Connect external Ampmeter
- Switch ON mains power .
- Adjust the required current through the loop
using hand-wheel.
19Test level adjustment
???????????CF??????
Standard level Field in the loop A/m Current required for INA 702 ( power ) Cf 9,8
1 1 0,102 A
2 3 0,306 A
3 10 1,02 A
4 30 3,06 A
x 40 ( max ) 4,08 A
H CF x I ????????? x ??????? ????(H)
20IEC61000-4-9
- Pulse magnetic field immunity
- ?????????
21IEC61000-4-9???????
?? ?????? ??????
A/m uT
1 - -
2 - -
3 100 126
4 300 378
5 1000 1260
x ?? ??
22?????
- ????? 6.4us30
- ?????16us30
- ??????100 to 1000A
- ?? ?????
- ???????????0 360?????10???
- ?????????
- ??????????????(??1.2/506.4/16us)