FASH 15 textiles - PowerPoint PPT Presentation

1 / 19
About This Presentation
Title:

FASH 15 textiles

Description:

FASH 15 textiles basic weaves & fabrics basic weaves & fabrics a fabric is a pliable, planelike structure that can be made into 2- or 3-dimensional products that ... – PowerPoint PPT presentation

Number of Views:101
Avg rating:3.0/5.0
Slides: 20
Provided by: FC106
Category:

less

Transcript and Presenter's Notes

Title: FASH 15 textiles


1
FASH 15 textiles basic weaves fabrics
2
  • basic weaves fabrics
  • a fabric is a pliable, planelike structure that
    can be made into 2- or 3-dimensional products
    that require some shaping flexibility
  • fabric quality describes many characteristics
  • freedom from defects
  • uniform structure appearance
  • production performance
  • consumer performance
  • important to textile producers, designers,
    retailers consumers

3
  • woven fabrics
  • made with two or more sets of yarns interlaced at
    right angles
  • warp yarnsyarns in lengthwise direction (ends)
  • filling yarnsyarns in crosswise direction (weft)
  • common characteristics
  • made with two or more sets of yarns interlaced at
    right angles
  • many different interlacing patterns give interest
    and texture to fabric
  • yarns can be raveled from adjacent sides
  • fabrics have grain
  • fabrics are relatively stable, with little
    stretch in warp or filling

4
the loom http//www.youtube.com/watch?vcqjhvOuKL
R8NR1 hand looms http//www.youtube.com/watch?
vGLNalNO2yTgNR1featurefvwp air-jet
loom http//www.youtube.com/watch?vpgLstMHhLfY
rapier loom http//www.youtube.com/watch?vYOY_d
hy8AQ0NR1 projectile loom http//www.youtube.c
om/watch?vX3vjBYID0fc circular
loom http//www.youtube.com/watch?vXFFCAa1QHH4
5
  • characteristics of woven fabrics
  • warp filling differentiation
  • selvage is always parallel to lengthwise
    direction (warp)
  • most fabrics have a lower elongation in warp
    direction
  • warp yarns lie straighter and are more parallel
    in the fabrics because of loom tension
  • fancy or special-function yarns are usually in
    the filling direction
  • fabric characteristics may differentiate between
    the warp and filling directionsEXAMPLE poplin
    has filling rib satin has warp floats
  • warp yarns tend to have higher twist are
    similar and more uniform in structure and
    appearance
  • fabric crimp is usually greater for filling yarns
    since they must curve over or under warp yarns
    due to
  • loom operation
  • warp yarn count tends to be higher
  • than filling yarn count
  • if yarn-dyed stripes are in one
  • direction only they tend to be in
  • the warp direction

6
  • characteristics of woven fabrics
  • graingeometry or position of warp yarns relative
    to filling yarns
  • on-grain fabric has lengthwise grain parallel to
    warp yarns crosswise grain parallel to filling
    yarns
  • off-grain fabrics create problems in production
    usedo not drape properly or hang evenly and
    printed designs are not straight

7
  • characteristics of woven fabrics
  • fabric count
  • number of warp and filling yarns per square inch
  • indication of qualityhigher count, better
    quality
  • balance
  • ratio of warp yarns to filling yarns in fabric
  • balanced fabric 11
  • selvage
  • lengthwise self-edge of a fabric
  • formed differently on different looms

8
  • characteristics of woven fabrics
  • fabric width
  • loom determines fabric width
  • handwovennarrow (27-36 inches)
  • commercialexceed 60 inches
  • consumer market45-60 inches or 54-60
  • fabric weight
  • describes how much a given area or length of
    fabric weighs
  • importantidentify appropriate use name
  • lightweight/top weightweigh lt 4.0 oz/sq yd
  • medium weight4.0-6.0 oz/sq yd
  • heavyweight/bottom weight weight gt 6.0 oz/sq yd

9
  • naming diagramming woven fabrics
  • fabric names are based on
  • fabric structure
  • fabric weight
  • yarn type
  • yarn balance
  • finishes

10
(No Transcript)
11
  • plain weave
  • simplest of the three basic weaves
  • formed by yarns at right angles passing
    alternately over and under each other
  • least expensive weave to produce
  • no technical face or back unless printed
  • general characteristics
  • tend to wrinkle easily
  • less absorbent than other weaves
  • raveling less of a problem
  • yarn type greatly influences
  • these characteristics
  • CREATE A PLAIN WEAVE

12
  • balanced plain weave
  • simplest plain weave
  • warp filling yarns are same size same
    distance apart
  • wider range of end uses than fabrics of any other
    weave
  • most widely used type of woven fabric
  • can be made in any weight
  • lightweight sheergeorgette, chiffon, voile,
    organdy, organza
  • lightweight opaquelawn, batiste, China silk,
    habutai, challis
  • medium-weightpercale (calico, chintz, cretonne,
    polished cotton, glazed chintz) muslin,
    flannelette, outing flannel, gingham, chambray,
    madras, pongee, honan, ripstop nylon, ripstop
    taffeta, true crepe
  • heavyweightweavers cloth, homespun, crash,
    butcher cloth, burlap, hessian, osnaburg,
    flannel, tweed

13
  • unbalanced plain weave
  • significantly more yarns in one direction than
    the other
  • creates ribridges of varying size depending upon
    number size of yarns
  • lightweight ribbed fabricscrepe de chine
  • medium-weight ribbed fabricsbroadcloth, taffeta,
    shantung
  • heavyweight ribbed fabricpoplin, faille, rep,
    bengaline, ottoman, grosgrain, bedford cord

14
  • basket weave
  • made with two or more adjacent warps and two or
    more fillings
  • interlacing pattern similar to plaintwo or more
    yarns follow same parallel path
  • most common are 2x2 or 4x4
  • variations include 2x1 and 2x3
  • fabrics that have a basket weave
  • dimity
  • oxford cloth
  • sailcloth
  • duck
  • canvas
  • hopsacking
  • monks cloth

15
  • twill weave
  • each warp or filling yarn floats across two or
    more filling or warp yarns with a progression of
    interlacings by one to the right or the left
  • forms a distinct diagonal line or wale
  • can be made on a simple loom
  • have technical face backface has most
    pronounced wale
  • fewer interlacings allow yarns to
  • move more freely
  • softer, more pliable recover
  • better from wrinkles
  • soil shows less on uneven face
  • of twill weave than plain weave
  • CREATE A TWILL WEAVE

16
  • even-sided twill weave
  • expose an equal amount of warp and filling yarn
    on each side of fabric
  • reversible
  • even-sided twill weave fabrics
  • foulard or surah
  • serge
  • twill flannel
  • sharkskin
  • herringbone
  • houndstooth

17
  • warp-faced twill weave
  • have predominance of warp yarns on face
  • stronger more resistant to abrasion piling
  • warp-faced twill weave fabrics
  • lining twill
  • denim
  • jean
  • drill
  • covert
  • chino
  • gabardine
  • cavalry twill
  • fancy twill

18
  • satin weave
  • each warp floats over four filling yarns and
    interlaces with the 5th filling yarn with a
    progression of interlacings by two to the right
    or the left
  • can be produced on simple loom
  • lustrous because of long floats on surface
  • yarns can be packed very closely together
  • face back look significantly different
  • high count gives strength, durability, body,
    firmness, wind repellency
  • fewer interlacings gives
  • pliability and wrinkly resistance,
  • but yarns may snag, slip or
  • unravel easily
  • CREATE A SATIN WEAVE

19
  • satin weave
  • satin weave fabrics
  • satinwarp faced (warp floats cover surface),
    filament yarns
  • crepe-back satincrepe yarns give softness
    drapeability
  • sateenspun yarns, come in filling sateen warp
    sateen
Write a Comment
User Comments (0)
About PowerShow.com