T775 Series 2000 Stand-Alone Controller

1
T775 Series 2000 Stand-Alone Controller

• New Product Introduction Sales Presentation
• February 5, 2007

2
T775 Series 2000

• T775 Series 2000 replaces
• T775 Series 1000 models
• H775 Humidity Controllers
• Release date set for second quarter
• 38 existing models replaced by 14 new T775 models

T775 Series 2000
3
Informative Home Display
Relay Status
Sensor Temperature
Modulating Output Status
Digital Input Status
Easy to Use Keypad
4
Home Screens Provide Useful Info

• See sensor, modulating output, and relay
  configuration information
• See sensor, modulating output, and relay status
  information
• Use the left and right arrow buttons to scroll
  through status screens for all defined outputs,
  modulating, and relays

5
Easy-to-Use Graphical Interface

• Menu driven programming
• As easy to use as your cell phone
• Program with clear, plain language prompts

Easy programming saves installation time
6
Time Clock Scheduler Built-In

• For Setback or Disable Output Option
• Save energy during unoccupied times
• Gives you more control over your equipment
  without needing to purchase an additional time
  clock
• All T775 models include the scheduler

Energy saving feature
7
Up to 2 Independent Modulating Outputs

• Configure each output individually for
• 0-10 Vdc,
• 2-10 Vdc,
• 4-20 mA, or
• Series 90
• Versatility saves time in selecting the right
  control for the job

One model handles many field requirements
8
NEMA 4x Enclosure Option

• Protected from water and corrosion
• Install in animal confinement areas, washdown
  areas, swimming pools, and similar locations
• Fours models with NEMA 4x enclosures all others
  have NEMA 1
• T775B2016
• T775B2024
• T775M2022
• T775M2014

The right control for harsh locations
9
Modulating High or Low Limit Control

• Equipment protection
• If you need to protect a coil from freezing, or
  your equipment from overheating
• Gives you the ability to adjust your control
  temperature at sensor A to protect equipment at
  sensor B
• Three models offer hi/low limit control feature
• T775R2043
• T775M2048
• T775M2030

Consistent control while protecting your equipment
10
Extended Temperature Range

• Setpoint temperature range of -40F to 248F
• Gives you the ability to control a wider range of
  temperatures with a single device
• One device covers it all

11
Configure Integral and Derivative Times

• For applications where pinpoint control is
  required
• Option is standard on every device
• PI control on modulating outputs is setup by
  default to behave just like the previous T775
  Series 1000, but now you can adjust reaction
  times and behavior as you like it, giving you
  more control.

12
Digital Input Option

• Connect an external time clock or any external
  switch to the digital input
• Allows you to either disable all outputs or
  trigger them for a programmed setback temperature
• Standard on all models

13
Reset Models with Simplified Setup

• Vastly simplified reset programming
• Simply enter the high and low control
  temperatures and the corresponding high and low
  outdoor temperatures
• Reset saves energy - as the outside temp gets
  colder you can reset the setpoint temperature to
  save energy

Faster setup energy savings for customers
14
Reset Set-Up
15
Power Supply

• All T775s can be powered with low or line voltage
• 24 Vac
• 120/240 Vac
• No need to add a separate transformer

No guessing which control youll need
16
Configure Minimum Off Time

• Protect equipment by setting a minimum off time
  if needed
• Reduces the need for a separate time delay device
  to protect equipment
• Set once for all relays
• Option available on all models with relay outputs.

Set once for all relays
17
Sensor Calibration

• Calibrate input sensors /-10F
• T775U calibrations values are /-10 of the user
  defined input range
• Use to compensate for resistance drops in wire
  leads
• Use to offset the input temperature for sensor
  location or for any other reason

Flexible and accurate control
18
Name Each Sensor

• Select from a list of descriptive labels for each
  sensor
• Label will always include A, B, and C designators
  for Sensor A, Sensor B, and Sensor C
• Sensor labels displayed on the Home screen

19
Sensor Names Appear on Home Screen
Sensor Names Always Displayed on the Home Screen
20
Display Relay Runtime

• Quickly and easily check to see how many hours a
  stage has been running
• Reset to zero at any time
• Available on all models

Runtime Displayed for Each Relay
21
Locking Keypad

• Keep configuration secure from unauthorized
  changes
• Easy to lock/unlock but not obvious how to unlock
  unless you know the system

Lock Icon Indicates Keypad is Locked
22
Fewer Models

• 14 Series 2000 T775 models replace 38 Series 1000
  T775 models
• Reduce inventory
• Eliminate the headache of choosing the right
  controller

Reduced inventory keeps the money in your pocket
23
Standard Models

• Use in standard applications
• Minimal setup and configuration required
• All models ship with one temperature sensor all
  except single relay model can accept two sensor
  inputs.
• Floating output option now available!

ProductNumber Description Replaces Relay Outputs Analog Outputs4-20mA, 0-10Vdc, 2-10Vdc, Series 90 FloatingOutput SensorInputs Sensors Included
T775A2009 Standard T775A1001/U 1 SPDT   1 1
T775B2016 Standard-NEMA 4X   2 SPDT 1 2 1
T775B2032 Standard T775A1019/UT775B1000/U 2 SPDT 1 2 1
T775B2024 Standard-NEMA 4X T775C1009/UT775D1008/U 4 SPDT 2 2 1
T775B2040 Standard T775A1027/UT775A1035/UT775B1018/UT775B1026/UT775B1042/BT775B1042/U 4 SPDT 2 2 1
One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs.
24
Modulating Models

• Use in modulating applications, with the option
  for relay outputs as well.
• Easily define analog output configuration through
  programming
• All models ship with one temperature sensor

ProductNumber Description Replaces Relay Outputs Analog Outputs4-20mA, 0-10Vdc, 2-10Vdc, Series 90 FloatingOutput SensorInputs Sensors Included
T775M2006 Modulating   None 2   2 1
T775M2022 Modulating-NEMA 4X   2 SPDT 2   2 1
T775M2048 Modulating T775E1015/UT775E1023/UT775E1056/UT775E1064/UT775E1098/U 2 SPDT 2   2 1
T775M2014 Modulating-NEMA 4X T775G1005/UT775G1013/UT775G1021/UT775G1039/B 4 SPDT 2   2 1
T775M2030 Modulating T775E1114/UT775F1022/UT775F1055/UT775F1089/U 4 SPDT 2   2 1
One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs.
25
Reset Models

• Use in applications requiring reset
• All models ship with two temperature sensors

ProductNumber Description Replaces Relay Outputs Analog Outputs4-20mA, 0-10Vdc, 2-10Vdc, Series 90 FloatingOutput SensorInputs Sensors Included
T775R2035 Reset option T775J1001/UT775J1076/U 2 SPDT 1 2 2
T775R2043 Reset option T775J1019/UT775J1027/UT775J1035/U None 2   2 2
T775R2027 Reset option T775J1043/UT775J1050/UT775J1068/U 2 SPDT 2   2 2
T775R2001 Reset option   4 SPDT 2 2 2
T775R2019 Reset option   4 SPDT 2   2 2
One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs. One floating output eliminates the two relay outputs.
26
Boiler with Reset Model

• Handle multi-stage boiler applications with this
  single controller.
• 1 dedicated pump output
• Staging for up to 12 relays
• 1 digital output alarm
• Pump exercise, pump pre-purge and post-purge,
  warm weather shut-down.
• Displayed run time
• Ships with three temperature sensors

ProductNumber Description Replaces Relay Outputs Analog Outputs4-20mA,0-10Vdc, 2-10Vdc, Series 90 SensorInputs Available Sensors Included OutputReset
T775P2003 Special Boiler with Reset 4 SPDT 3 3 X
T775S2008 Four relay expansion module add one or two for a total of 8 or 12 relays. 4 SPDT
27
Stage Sequencer with Reset Model

• Four stages or add up to two optional 4-stage
  expansion relay modules for 8, or 12 stage
  operation
• Flexible setup allows you to configure these
  stages any way you like for heating, cooling or
  divide up the stages as you like for both heating
  and cooling
• Operating up to 12 stages, these can control
  multiple low-mass boilers, chillers, and/or
  electric heat from a single control
• Expandable to 12 relays with the T775s 4-Relay
  Expansion Module
• Ships with one temperature sensor

ProductNumber Description Replaces Relay Outputs Analog Outputs4-20mA,0-10Vdc, 2-10Vdc, Series 90 SensorInputs Available Sensors Included OutputReset
T775L2007 Stage Sequencer with Reset Option 4 SPDT   2 1 X
T775S2008 Four relay expansion module add one or two for a total of 8 or 12 relays. 4 SPDT
28
Universal Model for pressure, humidity, etc.

• Easy setup for configuring control of pressure,
  humidity, temperature, or any medium with a
  0-10Vdc or 4-20mA sensor input.
• Select from a variety of pressure, humidity, etc.
  sensors for the desired application.
• Control humidity with RH displayed, or control
  pressure with in. w.c., psi, Pa, or kPa
  displayed.
• Outputs include 2 modulating and two relay
  outputs that can each have its own setpoint.
• Ability to reset the output based on outdoor
  temperature, handy when you need to reduce window
  condensation when setting humidity levels
• Complete versatility in a single control allows
  you the freedom to do what the job requires

ProductNumber Description Replaces Relay Outputs Analog Outputs4-20mA,0-10Vdc, 2-10Vdc, Series 90 SensorInputs Available Sensors Included OutputReset
T775U2006 Universal - Humidity, Pressure, etc. H775A1006/UH775A1022/UH775A1048/UH775A1063/UH775B1005/UH775C1004/UH775D1003/UH775E1002/U 2 SPDT 2 2 0 X
29
T775 Legacy Product Comparison
 Feature/Function T775 Series 1000 T775 Series 2000
Relays 1 to 4 SPDT 1 to 12 SPDT (with T775S)
Relay Contact Rating 9.8A full load at 120Vac Same
Power Supply 24, 120, 240 VAC Same
Modulating Output 1 modulating, up to 3 SPDT relays 2 modulating,up to 4 SPDT relays.
 Scheduler No Standard on all models. Provides one setback period per day, configurable for each day of the week.
Temp Sensor PT3000 PT1000 IEC 751
Watertight Temp Sensor With NEMA 4X models Same
NEMA 4X enclosure Optional up to 4 relays Same
Approvals UL UL, CE, C-Tick
Ambient temp range -40 to 140F same
Modulating outputs 0 - 10 Vdc, 2 - 10 Vdc, 4 20 mA, Series 90 Floating Requires a separate model for each type supported Models with mod output support all types (except floating option which is offered on the relay output models).
Supports 0 - 10 Vdc output No Yes
Supports floating output No Yes
Temperature Setpoint Range -40 to 220F -40 to 248F
Differential/Throttling range 1 to 35F 1 to 150F
Integral Action Fixed Configurable (settable integral time)
30
T775 Legacy Product Comparison (cont)
 Feature/Function T775 Series 1000 T775 Series 2000
Digital Input Disable all outputs Options1) Disable all inputs2) Alternate setpoints for all outputs
Reset Yes Yes - with simplified configuration
Reset optional All outputs or none. Configurable for each output
Reset Set up DIP switches LCD user interface
Irreversible setpoint high limit to meet some codes No Optional
Engineering Units Standard Models F or C Same
Engineering Units Universal Model NA F, C, in wc, psi, , kPa, Pa
Relay Minimum Off Time No Configurable
Power up action 300 second countdown before control enabled Minimum off activated at powerup (yes/no choice for each relay)
Sensor Calibration No Yes
Output Sequencing Option No Yes single setpoint drives multiple relays.
High or Low Modulating Limit Control No Yes
Humidity Control H775 up to 4 relays, 2 sensors required for mod out Universal Model supports relay or modulating RH control, with Temp Reset option
Boiler Special Model No Yes- single setpoint drives multiple relays,Alarm Output, 3 sensor inputs available (supply, return, outside).
31
Johnson ControlsA350

• Strengths
• Modular design
• Easy to install
• Simple to use
• Low cost , simple single relay model (a large
  share of the business)
• Customer loyalty

• Challenges
• Multiple parts to buy for each installation
• Cost goes up quickly when modules are added
• Expensive when using multiple relays with an LCD
  display
• Feature set cant compare with T775, see next
  slide

32
Competitive ComparisonJohnson Controls
Feature Honeywell Johnson Controls
Timeclock with setback 7 day, 2 events per day no
Modulating Outputs 0-10 Vdc, 4-20 Vdc, 4-20 mA, Series 90 Floating 0-10 Vdc and 4-20 mA
Built-in Display Yes No
High/Low Mod Limit Control Yes No
Wide Setpoint Range -40F to 248FAll models, with Celsius too. Either -30F to 130F or 90F to 250F
Throttling Adjustment Range 1-150F 2-30F
Digital input for setback or disable Yes No
Sensor Calibration Yes No
Adjustable minimum off time Yes No
Integral voltage options Yes No
Nema 4x Models Yes No
Irreversible high setpoint limit Yes No
33
Tekmar264 and others

• Strengths
• Wide Range of products
• Application knowledge
• Excellent Web site
• Support consulting engineers

• Challenges
• Can be complicated to set up
• Fixed segment display cryptic to decipher without
  instructions
• High cost products

34
www.honeywell.com