Title: asr
1asrAutomatic Scrap Recovery System
2Applications
- Blown film
- Cast film
- Stretch wrap
- Tape lines
- Tacky films
- Extrusion coating of paper textile and nonwovens
3Flow sheet of a typical asr system
4Standard elements of an asr system
- Pickup manifold
- Inducer
- Film grinder with air eliminator and fluff blower
- Refeed machine with cyclone
- Controls for all elements
Optional available from PROCESS CONTROL
- Roll feeder (including control)
- Tube material
- Strips Cutter
- Bagging stand
- Support stand (for example a blender above the
refeed machine) - Silencers for tubes or sound enclosures for the
grinder
5Pickup manifold PP-Series
The pickup manifold introduces the trims into the
tube system. It has to be designed in a way that
all pickup bells have the same air speed to pick
up the trims securely.
6Inducer IN-Series
IN405
The vacuum and blow out-air is produced by a
venturi (principle of an aircraft wing).
Air from blower
Vacuum
Air flow
Inlet tube
IN202 compact version MINIDUCER
Inlet tube set screw
Venturi gap
7Inducer IN-Series
Available models 50,8 mm inlet tube other
models like -IN202 1,1 kW (50 Hz) IN3 series
available 101,6 mm inlet
tube -IN405 4,0 kW (50 Hz) -IN407 4,6 kW (60
Hz) -IN410 7,5 kW (50 Hz) 8,6 kW (60
Hz) -IN415 11 kW (50 Hz) -IN420 15 kW (50
Hz) 12,6 kW (60 Hz) 152,4 mm inlet
tube IN6... Special design available
8GF-Series film grinder
View into the cutting chamber Scissors cut
working principle
Air eliminator
The quality of the fluff has a big influence on
the ability to refeed the material. PORCESS
CONTROL grinders ensure always an outstanding
quality of the ground material.
By using the scissors cut principle PROCESS
CONTROLs grinders produce an absolute uniform
fluff with a narrow particle size distribution
and a high bulk density
Manual feed chute (available as an option)
Roll feeder (available as an option)
Cutting chamber
Fluff blower
9GF-Series film grinder
Models -GFA 1 stator knife, 2 rotor
knives Cutting chamber 191 x 157 mm Motor 4
kW -GFB 1 stator knife, 3 rotor
knives Cutting chamber 292 x 241 mm Motor
15 kW -GFC 1 stator knife, 3 rotor
knives Cutting chamber 445 x 336 mm Motor
22,5 kW oder 30 kW -GFD 2 stator knife, 3 rotor
knives Cutting chamber 637 x 406
mm Motor 37,5 kW to 5 kW
10Edge trim grinder M100
Cutting chamber M100
Edge trim grinder M100
11Edge trim grinder M100
- direct 4 kW-drive, completely mounted on a frame
- Max. troughput 25 kg/h
- 2 rotor- and 2 stator-knives with scissor
cut-principle - Screen with 5 mm width
- Suction and transport blower
- Electric power supply 400 V, 50 Hz, 3 Ph, 20 A
- Noise level max. 72 d(B)A
12Air eliminator AEN
The AEN ensures that the trims fall into the
cutting chamber by gravity, without turbulences
and ball-building. The constant alimentation into
the grinder is an important point for getting a
fluff of perfect quality.
Mounting Instruction Each AEN has a decal
showing how to mount the end of the pipe work.
13Refeed machine RMX
Models -RMX2 -RMX3 -RMX4 -RMX5
The refeed auger reaches into the throat of the
extruder.
14Refeed machine RMX (cut)
6. Fluff access door (safety interlocked) 7.
Auger with bridge breaker 8. High level switch
1. Variable speed drive 2. Fluff hopper 3.
Virgin material chamber 4. Scrap compacting
zone 5. Virgin drain
6
1
2
3
7
8
Compacted fluff
4
5
Virgin material
Cut view column of compacted fluff surrounded by
virgin material
15Scrap compacting zone of a refeed machine
The fluff is compacted from a bulk density of
approx. 80 100 g/dm³ to approx. 300 400
g/dm³. The high degree of compaction ensures
that pumping of the extruder is avoided.
16Refeed machine RMX (main dimensions) and control
unit
dimensions in mm
RMX control unit dimensions app. 600600250 mm
17Fluff hopper silo
- For intermediate
- storage in case of
- off-line operating
- RMX refeed machine
- Capacity up to
- 28.000 dm³
18Benefits
Reduces operating costs and improved
quality Eliminates scrap handling
costs Automatic system decreases labor
requirements A high return on investment
19asr in comparison to repelletising
First of all it seems that repelletising has
advantages because you get a material that is
easy to handle, but The additional melt
process degrades the material chemically
the melt flow index (MFI) changes. The quality
of the product is influenced negatively. In-line
recycling does not bring additional heat into
the material. In-line recycling is always much
more cost effective regarding the energy
consumption.
20Examples for application
tape line
cast film line
21Examples for applications
diagrammatic plan of the tape line from page 16
22Examples for applications
GUARDIANBatch Blender
Fluff silo
Refeed Machine
Bagging Stand
23Examples for applications
IN trim conveying system
Bagging stand
24Data recording for preparing a quotation
In this data sheet all necessary data concerning
the extruder and the process are caught