Vehicle Flow - PowerPoint PPT Presentation

About This Presentation
Title:

Vehicle Flow

Description:

Vehicle Flow ... placement progression minimum headways Throughput Vehicle Following Spacing needed for stopping Deceleration 3 types of deceleration Normal dn = 8fps ... – PowerPoint PPT presentation

Number of Views:140
Avg rating:3.0/5.0
Slides: 40
Provided by: Andrew1220
Category:

less

Transcript and Presenter's Notes

Title: Vehicle Flow


1
  • Vehicle Flow

2
Homework
  • Ch 5 1, 2, 4, 7, 9

3
Vehicle Flow
  • How do vehicles operate in the system
  • capacity
  • speed
  • headway
  • density

4
Time Space Diagrams
  • Show vehicle location vs. Time
  • one way or two way
  • any type of transportation system
  • used to find
  • siding placement
  • progression
  • minimum headways
  • Throughput

5
(No Transcript)
6
Vehicle Following
  • Spacing needed for stopping

7
Deceleration
  • 3 types of deceleration
  • Normal dn 8fps2
  • Emergency de 24fps2
  • Instantaneous
  • Initial spacing
  • S vd v2/2df v2/2dl NL x0
  • Safest spacing when lead vehicle decelerates
    instantaneously and following vehicle brakes at
    normal deceleration

8
Example
  • What is the safe initial spacing between two
    vehicles traveling 40 mph if the lead vehicle
    uses an emergency deceleration of 24 fps2 and
    the following vehicle normally decelerates at 8
    fps2? PR time 1.5 sec, vehicle length 20
    feet, x0 4 feet

9
Flow Concepts
  • 4 variables
  • volume
  • speed
  • density
  • headway

10
Volume
  • of vehicles passing a given point in a given
    unit time
  • q n/T
  • cars per hour
  • does not tell you anything about speed or density

11
Speed
  • 2 types
  • Space Mean Speed
  • distance divided by time
  • useful in determining vehicle flow
    characteristics
  • Time Mean Speed
  • Spot speeds
  • Radar gun
  • not useful except for tickets

12
Example
  • Si 2 miles, i 1 - 4
  • v1 42 mph, v2 39 mph, v3 47 mph, v4
    50 mph
  • Average V 44.5 mph
  • m1 3.1 min, m2 2.8 min, m3 3.3 min, m4
    3.0 min
  • Average 39.5 mph
  • What is the difference, is it significant?

13
Density
  • Concentration
  • vehicles per unit length
  • cars/mile

14
Headway
  • Time or distance between two vehicles
  • h 1/q gives the time headway
  • h 1/k gives distance headway
  • which is more useful?

15
Relationships
  • quk
  • basic relationship
  • Important points
  • jam density
  • jam speed
  • max volume

16
Relationships
17
Relationships
18
Relationships
19
Relationships
  • Shape of curves
  • what do they tell us?

20
Example
  • The u-k relationship is
  • u 2.6 0.001(k 240)2
  • Find umax, jam density, and max capacity

21
Shock waves
  • Happens when traffic is forced to change speed
    either slowing down or speeding up
  • shockwave
  • Can move either forward or backward
  • usw (qb qa)/(kb ka)
  • a, b are 2 points of interest
  • If shockwave is gt heading in direction of flow
  • If shockwave is 0 gt stationary
  • If shockwave is - gt moving against flow

22
Example
  • A line of traffic, moving at 30 mph and a
    concentration of 50 veh/mi is stopped for 30 sec
    at a red light. Calculate the velocity and
    direction of the stopping wave, the length of the
    line of cars stopped during the 30 sec of red,
    and the number of cars stopped during the 30 sec
    of red. Assume a jam capacity of 250 veh/mi

23
Control of Vehicle Flows
  • Control vehicles
  • minimize accidents
  • maximize effectiveness
  • transit
  • airports
  • roadways
  • Channelization most common control

24
Control of Vehicle Flows
  • Speed limits
  • Control on Links
  • signage
  • lane width
  • number of lanes
  • headway rules

25
Headway Rules
  • RR - uses block system

26
Headway Rules
  • Aircraft
  • Airports
  • 1 aircraft on runway at any time
  • separation distances
  • 2.5 miles between aircraft
  • 10 miles horizontal / 2000 ft vertical in air
  • Control based on aircraft location
  • Ground control for aircraft not on runway

27
Capacity
  • Capacity based on mode
  • of vehicles per hour
  • of passengers per hour
  • arrivals, departures per hour

28
Highways
  • Capacity varies by road type
  • Freeways
  • no controls,
  • Intersections
  • traffic control
  • 2 lane 4 lane roads
  • lead vehicle
  • All use Level of Service

29
Determining Capacity
  • Based on Roadway geometrics and traffic
    conditions
  • For Freeways
  • can determine ideal conditions and from that a
    maximum capacity

30
Peak Hour Factor
  • Measures demand peaking

31
Level of Service
  • LOS can be based on
  • delay per vehicle
  • speed
  • service flow
  • 6 LOS A - F
  • A is best
  • F is worst

32
Freeway Capacity
  • LOS based on
  • density
  • speed
  • v/c
  • For an LOS can find Maximum Service Flow (MSF)

33
MSF
  • MSF qmax(v/c) - ideal conditions
  • SF q qmaxNfwFHV
  • Table 4.3.3 for heavy vehicle factors
  • Table 4.3.2 for width factors

34
Capacity Restrictions
  • Non recurring
  • Recurring

35
Example
  • Ch 4 14

36
Pedestrians
  • LOS based on
  • speed
  • flow rate
  • v/c ratio

37
Bike LOS
  • Based on amount of hindrance

38
Airports
  • Capacity depends on landside and airside
  • LOS is based on delay and total time
  • Why are airports becoming shopping malls?

39
Rail
  • Mass transit
  • LOS based on pass/seat, space/ pass,
  • both peak and off peak
  • AMTRAK
  • LOS based on wait time, comfort, pass/seat
Write a Comment
User Comments (0)
About PowerShow.com