HECRAS Other Features (2) HECRAS sxva maxasiaTeblebi (2)

1
HECRAS Other Features (2)HECRASsxva
maxasiaTeblebi (2)

• by G. Parodi
• WRS ITC The Netherlands
• g. parodi
• WRS-ITC- niderlandebi

2
Other Features of HEC-RAS- part 2HEC-RAS-is sxva
maxasiaTeblebi - meore nawili

• Cross Section Interpolation
• ganivi kveTis interpolacia
• Multiple Plans
• ramodenime gegma
• Supporting Pictures
• suraTebis mxardaWera

3
Cross Section Interpolationganivi kveTis
interpolacia
4
Cross Section Interpolationganivi kveTis
interpolacia

• Sometimes it is necessary to supplement surveyed
  cross section data by interpolating new sections
  between two surveyed sections
• xandaxan saWiroa SevavsoT gamokvleuli ganivi
  kveTebis monacemebi, ori arsebuli ganivi kveTis
  interpolaciis saSualebiT.
• Typically needed when the change in velocity head
  is large. HECRAS detects this by comparing
  conveyance values between two sections.
• rogorc wesi am operaciis Catareba saWiroa maSin,
  rodesac gvaqvs mniSvnelovani cvlileba gadazidvis
  zewolaSi. HECRAS-i gamoavlens amas ori seqciis
  Soris arsebuli gadazidvis monacemebis Sedarebis
  gziT.

5
Cross Section Interpolationganivi kveTis
interpolacia

• Geometric interpolation is accomplished by
  linearly interpolating between elevations and
  stations along cords
• geometriuli interpolacia xorcieldeba,
  horizontebis gaswvriv mdebare sadgurebsa da
  simaRleebs Soris xazovani interpolaciis
  saSualebiT.

• 2 Options 2 parametri
• Interpolate a reach (more than 2 cross-sections)
• gawvdomis interpolacia (2 ze meti ganivi kveTi)
• Between 2 cross-sections
• 2 ganiv kveTs Soris

6
Cross Section Interpolationganivi kveTis
interpolacia
7
Cross Section InterpolationMaster Cords - 5
Defaultsganivi kveTis interpolaciaZiriTadi
kvanZebi- 5 aucilebeli piroba

1. First coordinate of cross section
2. ganivi kveTis pirveli koordinati
3. Left bank (required)
4. marcxena napiri (savaldebuloa)
5. Minimum elevation point in main channel
6. minimaluri simaRlis aRmniSvneli wertili ZiriTad
   arxSi
7. Right bank (required)
8. marjvena sanapiro (savaldebuloa)
9. Last coordinate of cross section
10. ganivi kveTis bolo koordinati

8
Cross Section InterpolationMaster Cords ganivi
kveTis interpolaciaZiriTadi horizontebi
9
Be Aware Of What The Default Is DoingviyoT
informirebuli, imaze Tu ra keTdeba winapirobis
mixedviT

• User can establish more Master Chords to prevent
  mis-interpolations
• momxmarebels SeuZlia gamosaxos meti ZiriTadi
  horizonti raTa aaridos Tavi mcdar interpolacias

10
Adding Master Chords to InterpolationZiriTadi
horizontebis damateba interpolaciisas
An adequate interpolation adding master
chords adekvaturi interpolaciisas emateba
ZiriTadi horizontebi
11
Cross Section Interpolation Minor Cordsganivi
kveTebis interpolacia meoradi horizontebi
zedadinebis seqcia
pirveli koordinati
bolo koordinati
marcxena sanapiro
marjvena sanapiro
gadmobruneba
interpolirebuli seqcia
ZiriTadi horizonti
meoradi horizonti
qvedadinebis seqcia
12
Cross Section Interpolation Minor Cordsganivi
kveTebis interpolacia meoradi horizonti

• Automatically generated by program
• avtomaturad yalibdeba programis mier
• Stations are determined using proportional
  distances between master cords
• sadgurebi ganisazRvreba ZiriTad horizontebs Soris
  proporciuli distanciis gamoyenebiT
• Number of minor cords sum of coordinates in
  bounding cross sections minus number of master
  cords
• meoradi horizontebis raodenoba mosazRvre ganiv
  kveTebis koordinatebis jams minus ZiriTadi
  horizontebis raodenoba

13
Cross Section Interpolation Roughness
Coefficientsganivi kveTebis interpolacia
xaxunis koeficienti

• 4 default master cords (same as geometric minus
  the minimum channel elevation)
• 4 winapirobiT miRebuli ZiriTadi horizonti (igivea
  rac, geometriulad gamovakloT kalapotis minimaluri
  simaRle)
• Minor cords added at other locations if more than
  3 n values at either cross sect.
• meoradi horizonti emateba yvela im adgilas, sadac
  mniSvneloba metia vidre 3 n yovel ganiv kveTze
• Otherwise same as geometric interpolation
• sxva SemTxvevaSi igivea, rac geometriuli
  interpolacia

14
Cross Section Interpolation Other ganivi
kveTebis interpolacia sxva

• Other features which are interpolated downstream
  reach lengths, main channel bank stations,
  contraction and expansion coefficients, normal
  ineffective flow areas, levees, and normal
  blocked obstructions
• maxasiaTeblebi, romelTa interpolacia xdeba qveda
  dinebis gawvdomis sigrZe, ZiriTadi kalapotis
  napiris sadguri, kumSvis da gafarToebis
  koeficientebi, normuli araefeqturi dinebis
  regionebi, dambebi da normuli gamavlobis
  dablokva.
• Normal ineffective flow areas, levees, and normal
  blocked obstructions are interpolated only if
  both bounding cross sections have them.
• normaluri araefeqturi dinebis zona, dambebi da
  normuli dablokili gamavlobis Semcirebis
  interpolacia xdeba mxolod im SemTxvevaSi, Tu
  orive mosazRvre ganiv kveTas aqvs is.
• Can interpolate between 2 cross sections or
  entire reach
• SesaZlebelia interpolacia 2 ganiv kveTi Soris an
  srul gawvdomaze.

15
Multiple PlansHEC-RAS - ramodenime gegma
16
HEC-RAS - Multiple PlansHEC-RAS - ramodenime
gegma
Suggested Reading Chapter 5 of HEC-RAS Users
Manual rekomendirebuli literatura HEC-RAS-is
saxelmZRvanelo Tavi 5
17
HEC-RAS - Multiple PlansHEC-RAS - ramodenime
gegma
proeqtis faili failis saxeli. prj
geometriuli monacemebi fili saxeli. g02
geometriuli monacemebi fili saxeli. g01
geometriuli monacemebi fili saxeli. g03
damyarebuli dinebis monacemebi failis saxeli. g01
Suggested Reading Chapter 5 of HEC-RAS Users
Manual rekomendirebuli literatura HEC-RAS-is
saxelmZRvanelo Tavi 5
gegma 1 fili saxeli. p01
gegma 2 fili saxeli. p02
gegma 3 fili saxeli. p013
gauSvi faili 1 fili saxeli. r01
gauSvi faili 2 fili saxeli. r02
gauSvi faili 2 fili saxeli. r03
Sedegi 1 fili saxeli. o01
Sedegi 2 fili saxeli. o02
Sedegi 3 fili saxeli. o03
proeqtis monacemTa failebis sqema
18
HEC-RAS - Multiple PlansHEC-RAS - ramodenime
gegma
Able to compare plans in tables SesaZlebelia
gegmebis Sedareba cxrilis saSualebiT
19
HEC-RAS - Multiple PlansHEC-RAS - ramodenime
gegma
Able to compare plans in tables SesaZlebelia
SevadaroT gegmebi cxrilebis saSualebiT
20
HEC-RAS - Multiple PlansHEC-RAS - ramodenime
gegma
Able to compare plans in tables SesaZlebelia
SevadaroT gegma cxrilis saSualebiT
21
HEC-RAS - Multiple PlansHEC-RAS - ramodenime
gegma
As well as in profiles, cross-sections,
etc. iseve rogorc profilebi, ganiv kveTebi da
sxva..
22
Supporting PicturessuraTebis mxardaWera
23
Supporting PicturessuraTebis mxardaWera

• A picture can be attached to a cross section to
  help in documentation of the data.
• SesaZlebelia suraTebis mimagreba ganiv kveTebTan,
  rac daxmarebas gagviwevs monacemTa bazebis
  dokumentaciaSi.
• A picture can also be attached to the river
  schematic to assist in documentation.
• SesaZlebelia aseve suraTebis mimagreba sqematur
  gamosaxulebasTan, rac gamosadegia monacemTa
  bazebis dokumentirebisas..

24
Example - Cross-SectionmagaliTi ganivi kveTi
25
Example - River SchematicmagaliTi - mdinaris
sqematizacia
26
Example - River SchematicmagaliTi - mdinaris
sqematizacia
27
Example - River SchematicmagaliTi - mdinaris
sqematizacia
28
Log Filesregistrirebis failebi

• Program will write notes to a file as it performs
  the computations.
• programa Tanmimdevrulad Caiwers gaangariSebebis
  da operaciis msvlelobis yvela moqmedebas
  Sesabamis failSi.
• 10 different levels of output.
• Sedegebis 10 gansxvavebuli done.
• Files can get extremely large if higher levels
  are selected.
• SeiZleba miviRoT eqstremalurad didi zomis
  failebi, Tu SevarCieT gamoangariSebis maqsimaluri
  done.
• Generally not necessary unless unusual answers
  are given by the program.
• rogorc wesi araa savaldebulo, Tu programam ar
  mogvawoda uCveulo, mcdari Sedegi.

29
Other Optionssxva parametrebi
There are other options not discussed in this
presentation arseboben sxva parametrebic,
romelTa ganxilvac ar moxda am moxsenebaSi

• Scour at bridges
• gamorecxva, erozia xidebTan
• Lateral weirs
• lateraluri jebirebi
• Ice-covered rivers
• yinuliT dafaruli mdinareebi
• Cross-Section points filter
• ganivi kveTebis wertilebis filtri
• Fixed sediment elevations
• naleqebis fiqsirebuli simaRle
• Pilot channels
• piloturi nakadebi
• Setting ineffective flow areas to permanent
• araefeqturi dinebis monakveTis ganxilva, rogorc
  permanentuli dinebis mqone monakveTis.

30
Any Questions?kiTxvebi gaqvT?
31
End of lecture leqciis dasasruli