SU-8 - PowerPoint PPT Presentation

1 / 6
About This Presentation
Title:

SU-8

Description:

SU-8 is a polymer EPON SU-8 - a negative epoxy based photoresist containing 8-epoxy groups. - a single molecule contains 8 epoxy groups in a bisphenol- A novalac ... – PowerPoint PPT presentation

Number of Views:116
Avg rating:3.0/5.0
Slides: 7
Provided by: Abrah55
Category:

less

Transcript and Presenter's Notes

Title: SU-8


1
SU-8
  • is a polymer
  • EPON SU-8
  • - a negative epoxy based photoresist containing
    8-epoxy groups.
  • - a single molecule contains 8 epoxy groups in
    a bisphenol- A novalac glycidyl ether.
  • - dissolved in a organic solvent along with
    photoacid generator.
  • - is photosensitive(300- 400nm)
  • - promotes cross-linking reaction

lthttp//www.zurich.ibm.com/st/mems/su8.htmlgt
2
SU-8 Processing
  • A typical SU-8 process consists of
  • - Spin-coating
  • - Soft Bake
  • - Exposure
  • - Post Exposure bake(PEB)-to cross link
    exposed regions
  • of the film
  • - Development
  • - Rinse dry
  • - Hard Bake (or curing-optional)
  • - Imaged material
  • - Remove (optional)

3
Features of SU-8
  • Why should we use SU-8?
  • Good adhesion
  • Optical absorption in the UV spectrum is very low
    allowing patterning of thick coatings.
  • Broad range of thickness can be obtained from one
    spin with a conventional spin coater (750 nm to
    500 mm)
  • High aspect ratios ( 15 for lines and 10 for
    trenches)- high degree of cross-linking.
  • Optical transparency is gt 98 at wave lengths of
    500 to 850 nm.
  • lthttp//www.ee.ucla.edu/jjudy/classes/ee250a/lect
    ures/EE250A_Lecture_09_
  • Thick-Film_Lithography_SU-8_files/frame.htmgt

4
Features of SU-8
  • High thermal resistance due to
  • High chemical resistance cross-

  • linking
  • SU-8 is compatible with standard silicon
    micro-electronic processing.
  • SU-8 is used to create reverse patterns of
    channels, reservoirs, interconnects
  • Non-conductive- can be used as dielectric during
    electroplating.
  • Tg(glass transition temperature) is gt 200 degrees
    centigrade and
  • Td(decomposition temperature) is 380 degree
    centigrade for fully cured SU-8.
  • Modulus of elasticity is 4.02 GPa for tensile
    testing

5
Silicon
  • Silicon(Si) is a semi-conductor
  • Used as a Substrate.
  • It is cheap and convenient for micro-electronic
    process like lithography.
  • Adhesive to SU-8.

6
References
  • IBM Research -Zurich Research Laboratary. Epon
    SU-8 Photoresist.
  • lthttp//www.zurich.ibm.com/st/mems/su8.htmlgt
  • Judy, Jack. Thick film Lithography SU-8.
    2003.
  • lthttp//www.ee.ucla.edu/jjudy/classes/ee250a/
    lectures/EE250A_Lecture_09_Thick-Film_Lithography_
    SU-8_files/frame.htmgt
  • Ruhmen,R, Pfeiffer,K. et.al. SU-8 a high
    performance material for Mems appilcation.
    Polymer in Mems. http//www.microchem.com/resource
    s/tok_ebeam_resist.pdf
  • Feng,Ru. Farris,R. Influence of Processing
    conditions on the thermal and mechanical
    properties of SU-8 negative Photoresist
    Coatings. Journal of micromechanics and
    microengineering. Dec4 .2002.
  • lthttp//ej.iop.org/links/q61/JY4hey4mG8dIMzUo0E8OJ
    A/jm3112.pdfgt
Write a Comment
User Comments (0)
About PowerShow.com