Appropriate Release to Service statement

1
EBIS Maintenance Printout for each work order
item requiring a Release to Service
Form will usually be on yellow stock to
differentiate Work Order Item from other
paperwork
Brief description of discrepancy
Use caps lock to hold uniform appearance
throughout form
Use caps lock to hold uniform appearance
throughout form
Date, Hours, and cycles that the work was
performed
Concise statement of work performed
Generally REMOVED FAILED (PART NAME) P/N YYY
S/N123. INSTALLED OVERHAULED (OR OTHER CONDITION)
P/N YYY S/N 456. WORK IAW AMM 23-45-67-890-000.
SYSTEM OPS CHECKS GOOD
Appropriate Release to Service statement
Technician performing the work
Certifying Engineer to Release to Service
2
EBIS work order entry tips
USE STORED TYPE WORK.... FILL IN TLP/HOURS
Be sure you are on the right airplane, correct
month
Watch for an asterisk here
1.TYPE DESCREPANCY, ALL CAPS
!!!BRIEF!!! ACTION. THIS ENDS UP AS THE LOG
ENTRY. Removed,installed, p/n, s/n REMEMBER AMM
REF. Ops checks good, leak checks good
Paste ATA code here
Check labor hear
1st tab
Outside repair
Be sure parts are attached