OPTIONAL SIDE LIGHTING FOR 2Ws - PowerPoint PPT Presentation

1 / 9
About This Presentation
Title:

OPTIONAL SIDE LIGHTING FOR 2Ws

Description:

... the rider and in particular lady pillion can not see the surface condition of ground and immediate surroundings. ... we propose similar lamp (s) ... – PowerPoint PPT presentation

Number of Views:20
Avg rating:3.0/5.0
Slides: 10
Provided by: Mith152
Category:
Tags: 2ws | for | lighting | optional | side | lady | propose

less

Transcript and Presenter's Notes

Title: OPTIONAL SIDE LIGHTING FOR 2Ws


1
OPTIONAL SIDE LIGHTING FOR 2Ws
  • SIAM CMVR SAFETY GROUP MEETING
  • 3rd July 2012

2
Background
  • When there is no sufficient light on road, while
    dismounting from 2W, the rider and in particular
    lady pillion can not see the surface condition
    of ground and immediate surroundings.
  • This is particularly experienced in rural areas.
  • In such a condition, their feet may fall on
    harmful objects, stones, ditches, uneven
    surfaces, mud, water etc. and may have to walk on
    such surfaces.
  • In such events the persons are likely to get
    hurt.
  • Also, in such areas there is no light available
    for minor repairs e.g. removal of wheel for
    puncture repairs etc.

3
SITUATION IN 4W
  • ECE R 48 rev 06 permits an additional lamp called
    as External Courtesy Lamp to resolve such
    difficulties.
  • WP.29, in its 156th session agreed further
    boundary conditions for such lamps. The session
    also further permitted Maneuvering lamp.
    Reference documents are ECE/TRANS/WP.29/2012/10
    and 11.

4
External Courtesy Light 4W
5
External Courtesy Light 4W
6
Typical Field of Illumination of Courtesy Lamps
4W
Illumination area with courtesy lampin outer
mirror
Illumination area with courtesy lamp In side
skirt

7
Proposal
  • Considering the improvement in road safety of
    customers, we propose similar lamp (s) in case of
    2W.
  • This can also be considered for 3W.
  • Boundary conditions to suit Indian conditions
    could be -
  • Activated only when Front or rear position light
    is ON and
  • Either engine is stopped or when vehicle speed
    is below say 10 km/h.
  • White light should not be directly visible from
    rear.
  • The light shall have automatic off after a lapse
    of 60 seconds max after activation and / or off
    can be rider controlled.
  • Such conditions can be decided taking guidance
    from 4W regulations.
  • One of the examples of such light (s) is
    mentioned in next slide.

8
Courtesy Light 2W
9
Request
  • Considering improved road safety and in line with
    4W ECE 48 regulation, we request SIAM to takes up
    this issue with AISC to permit such lamp (s) on
    2W.
Write a Comment
User Comments (0)
About PowerShow.com