This sensor is a Microwave automatic door sensor applied

1

DNA-200B

• This sensor is a Microwave automatic door sensor
  applied
• Doppler radar principle.
• Please supply a voltage of AC/DC 9V AC/DC 24V.
• It is possible to use in any circumstances and
  has few wrong
• operation.
• (It is reliable as it's not detected by shaking
  any paper or
• newspaper.)
• The detecting method is able to be setting as 3
  level.
• When forward, it is setting as following
  Sensitivity Level 1.

(Accessories) 1. 2 screws for
fixing. 2. A flexible cord with length of 1.5m.
3. A instruction manual. 4. A Installation Paper.
Specification Type Specification Type
POWER SUPPLY AC/DC 9V AC/DC24V POWER CONSUMTION STANDBY / OPERATION 200mW_at_9V / 550mW_at_9V
MAINS FREQUENCY 50 60Hz POWER CONSUMTION STANDBY / OPERATION 200mW_at_9V / 550mW_at_9V
FREQUENCY 10.525GHz etc. RELATIVE HUMIDITY 0 95
FUNCTION INDICATION LED MOUNTING STYLE WALL
TIME DELAY/HOLD TIME REAL TIME / 0.5 SEC MOUNTING HEIGHT 2.0M 2.50M
RANGE (Level 1 Level 3) 0.0M 2.0M DIMENTION(WHD) 140 63 43mm
OPERATING TEMP - 25'C 60'C WEIGHT 120g
DETECTION ANGLE 40' 160' COVER COLOR BLACK, SILVER
2
Step 4 please connect a wire of the body of
sensor and a wire of automatic door system.
The yellow wire is for output, gray is
for power. The wire for power
has not polarity(,-). Step 5 please
set in moderation according to circumstances
as below setting method. Step 6
please fasten the connected wire on the body
and unite the cover with body.
Please set right for general operation of
this product. All settings are adjusted by
the DIP Switch. Setting method of the
sensitivity and detecting distance.
Yellow(COM) Yellow(N/O) Grey(AC/DC)
Grey(AC/DC)
Dnet Co.,Ltd.
Homepage www.dno.co.kr E-Mail
dneng_at_dno.co.kr
Tel[phone],3544 Fax[phone]