Upto Bottom Foaming Project Monitoring - SHJ

1
Upto Bottom Foaming Project Monitoring - SHJ
( Existing design ? Bottom support LH/RH weld
with side panel
7/3/2013
15/2/2013
15/3/2013
15/1/2013
22/2/2013
1/3/2013
15/10/2012
25/12/2012
Tool Ready FPA
Samples from vendor
1st trial Finish

• Foaming Bottom Ready
• Sealing Tape application
• method fix
• Process finalization

• PP lot of 50no

Handmade samples preparation To check m/c
feasibility
MP
Drawing preparation (new bottom panel)
2
Bottom Bulging Improvement update
Model Countermeasure Taken Date Of Implementation Model Name Serial Number Further Action Plan Target Date
KFL234 BOTTOM SUPPORT THICKNESS WIDTH INCREASED, COMPRESSOR BASE PLATE THICKNESS INCREASED 17/7/2012 KFL234TKC 390712261338601739 CABINET STRUCTURE FOAMING TILL BOTTOM 15/3/2013
KFL215 BOTTOM SUPPORT THICKNESS WIDTH INCREASED, COMPRESSOR BASE PLATE THICKNESS INCREASED 11/7/2012 KFL215TRC 391112261339301230 CABINET STRUCTURE FOAMING TILL BOTTOM 15/3/2013
VFP234 BOTTOM SUPPORT THICKNESS WIDTH INCREASED, COMPRESSOR BASE PLATE THICKNESS INCREASED 17/7/2012 VFP234TSV 390712260102600210 CABINET STRUCTURE FOAMING TILL BOTTOM 15/3/2013
KFL195 BOTTOM SUPPORT THICKNESS WIDTH INCREASED, COMPRESSOR BASE PLATE THICKNESS INCREASED 11/5/2012 KFL195KT 391212261338502220 CABINET STRUCTURE FOAMING TILL BOTTOM 15/3/2013
KFE194 BOTTOM SUPPORT THICKNESS WIDTH INCREASED, COMPRESSOR BASE PLATE THICKNESS INCREASED 11/5/2012 KFE194BR 391112261336817775  To be implement later on after the above models   To be implement later on after the above models 
KFP194 BOTTOM SUPPORT THICKNESS WIDTH INCREASED, COMPRESSOR BASE PLATE THICKNESS INCREASED 11/5/2012 KFP194WT 391112261337909437  To be implement later on after the above models   To be implement later on after the above models 
KGE193 BOTTOM SUPPORT THICKNESS WIDTH INCREASED, COMPRESSOR BASE PLATE THICKNESS INCREASED 11/5/2012 KGE193BR 391112261336948036  To be implement later on after the above models   To be implement later on after the above models 
VEE183/VEP184   PROPOSED   N/A BOTTOM SUPPORT THICKNESS WIDTH INCREASED, COMPRESSOR BASE PLATE THICKNESS INCREASED 1/2/2013
3
Compressor base plate modification
OLD Improved

Compressor base modification

• Thickness 1.2 mm

• Thickness 1 mm

4
Bottom support modification
OLD Improved

• Bottom support modified
• Angle height 290mm dipping in foam.
• All flanges are 25mm wide.

• Angle height 254mm dipping in foam.
• All flanges are 17mm wide.