Table%20Saw%20Safety%20

1
Table Saw Safety Operation

• The Table Saw is one of the most versatile
  pieces of equipment but must be operated safely
  and correctly.
• Follow these safety rules and operation
  instructions.

2
Pre-operation Safety

• Before operating, check the saw over making sure
  that the fence is operating properly and it is
  square to the blade.

3
Pre-operation Safety

• The saw is equipped with a blade guard, use this
  whenever possible.

4
Pre-operation Safety

• Be certain the blade is sharp and the correct one
  for your work.

5
Pre-operation Safety

• Set the blade so
• that it extends
• about ¼ in. above the material to be cut.

6
Pre-operation Safety

• Check and make any necessary adjustments using
  the control wheels located on the saw.

7
Operation Safety

• Stand to one side of the operating blade and
  never reach across it.

8
Operation Safety

• The position of the stock must be controlled by
  either the fence or a miter gauge.
• NEVER CUT STOCK FREE HAND.

9
Operation Safety

• MAINTAIN A 4 in. SAFETY MARGIN
• Use push sticks to avoid putting your hands close
  to the blade.

10
Operation Safety

• Stop the saw before making adjustments to the
  blade or fence.
• Use the foot stop switch to avoid reaching across
  the path of the blade.

11
Final Safety Points

• Always wear safety glasses or shield.
• Stock should be surfaced and at least one edge
  jointed before being cut.
• Do not let scrap accumulate around the saw blade.
  Use a push stick to remove.
• Always keep your eyes on your work, do not be
  distracted.