Beat Deewali

1
Product Fully Automatic Washing Machine
10 April 14
Procedure of Connecting Coil Unit In series
with Capacitor
2
Procedure of Connecting Coil Unit In series with
Capacitor
10 April 14

• Procedure
• Remove the wire connector of Joint between
  Capacitor Red Wire , Motor Red Wire Harness Red
  Wire .
• Pick up the New Coil Unit . Do not Disassemble or
  change the shape of Coil unit .
• Connect the one end of Coil unit to Capacitor Red
  Wire .
• Crimp the wire connectors on wire joint between
  Coil wire Capacitor Red wire.
• Connect another end of Coil unit to joint
  between Red wire from Motor Red wire from
  Harness .
• Crimp the wire connectors on wire joint between
  Coil wire , Red wire from Motor Red wire from
  Harness .
• After connecting Coil You have two separate
  joints of Red coloured wires .before it was
  Single joint of red wires as shown in photos.
• Continue on next Page

Applicable Models
VT 60H12
VT 65H12
VT 65E12
VT 60A12
VT 65G11
VT 65B11
KT6521
Present condition of machine Single Joint
between Capacitor Red Wire , Motor Red Wire ,
Harness Red Wire
After Coil Connect
Joint 1 Between Coil one end Motor Red Wire
Harness Red wire
Joint 2 Between Coil one end Capacitor Red
Wire
3
Procedure of Connecting Coil Unit In series with
Capacitor
10 April 14
Procedure 8. Above Capacitor screwing hole
there is a extra hole on cabinet as marked in
photo. 9. On Coil Unit there is a push mount
present as marked in photo . 10. Fix this Push
mount cable tie in holes present above the
Capacitor screwing hole .
Push Mount cable tie present on Coil Unit
Precautions

1. Do not Disassemble or change the shape of Coil
   unit .
2. After attaching the coil please do proper
   harnessing of all connectors.

Hole in to which Coil to be fixed from inner
side of Cabinet with Push mount cable tie
After fixing Coil from inner side of cabinet
Attached coil unit with cabinet with the help of
push mount cable tie
4
Procedure of Connecting Coil Unit In series with
Capacitor
FAWM Wiring Diagram for connections