Grommet Directions

1
Grommet Directions
2
Step 1

• Mark the grommet hole 1 from the corner.

3
Step 2

• Poke a seam ripper through that mark and all
  layers of the backpack. This will create a spot
  for the grommet to go into.

4
Step 3

• Place grommet in the hole. (The smooth side of
  the grommet should be on the front of the
  backpack.)
• You may need to use the seam ripper to enlarge
  the hole slightly.
• Be careful not to cause a large tear.

5
Step 4

• The rough edge of the grommet should poke through
  the backside of the backpack.
• Push all threads off the edges of the grommet.

6
Step 5

• Place the small round grommet tool on the wood
  block.

7
Step 6

• Line up the rough edges of the grommet with
  circle of the small tool.

8
Step 7

• Place the tall grommet tool on the smooth edge of
  the grommet (lining up the circles).

9
Step 8

• Hammer about 5 times to bend the grommet prongs
  around the shirt fabric.
• Repeat for the other side.