Harness assembly aid with pull(haap1208-haa with pull)

1
Harness assembly aid with pull(haap1208-haa
with pull)

• Description
• Function HAAP1208 guides in making a harness
  assembly and checks correct locking of terminal,
  by 'Pulling' inserted terminal. Pulling needs
  appropriate test fixture. Assembly is done in
  steps. In each step trey LED/s glows to indicate
  from where to pick up a crimped cable. An LED
  glows inside connector to indicate where to
  insert. After Inserting, the same cable is pulled
  and checked for correct locking. 

2
Harness assembly aid with pull(haap1208-haa
with pull)

• The complete system is  
• Test blocks / fixtures with LED indication (I/O
  LEDs) under each cavity to indicate where to
  insert. Test block also has a switch which
  operates on pulling a locked cable. 
• Treys with LEDs on each trey to indicate from
  where to pick up a cable. 
• HAAP1208 slave unit connected to trey LEDs, I/O
  LEDs and switch indicating pull. 

3
Harness assembly aid with pull(haap1208-haa
with pull)

• Features 
• HAAP1208 is a compact unit working on 12VDC, with
  appropriate connectors. 
• It is programmable using a keyboard or using
  soft program and USB pen drive. 
• USB port reads and writes USB pen drive.- a)
  User authentication ensures access to tester
  functions. b) HAAP Data and label data transfer
  to tester.
•   One slave has 128 configurable IO points. 
• HAAP1208 stores 128 programs at a time. 
• It has a 4 line LCD display of 20 digits. 
• Keys with tactile feedback and long lasting. 

4
(No Transcript)
5

• Thank You