Steps Epoxy Experts Follow to Apply Epoxy Floor Paint

1
WELCOME TO
2
Steps Epoxy Experts Follow to Apply Epoxy Floor
Paint
3
There is no rocket science behind applying epoxy
floor coatings. The process is almost as simple
and easy as rolling paint on the wall or across
a porch floor. But even if the process of coating
a floor with epoxy is easy, it does not mean you
can do it all by yourself without any
professional help. If you are thinking of
getting an epoxy floor coating, it is suggested
to hire the best epoxy flooring contractors in
Melbourne. Regardless of the place, the epoxy
flooring experts follow a set procedure which
remains the same. In this blog, I will explain
the steps that the epoxy flooring experts
follow. Before beginning the procedure, the floor
is thoroughly cleaned and patched. If you try to
do it by yourself using the epoxy kit, you may
only get one coat of coverage but you would
require at least two layers. After cleaning, the
epoxy floor coating process is started. The below
given guide is a summary of the steps on how to
apply epoxy coating on the floor. This guide will
suit a simple roller applied floor. Such epoxy
coatings are normally applied with a coat of
primer and 2 coats of epoxy floor coating. Epoxy
floors are good for light and medium wear and
tear. Perfect for the places like garages and
storage rooms. If you are seeking a floor for
heavy and industrial goods, then you may want to
know the use of a self-leveling floor. This
floor type tends to have a larger thickness. Now,
let us look into the steps that epoxy flooring
professionals follow
4
Preparing the Floor Surface
This is the first step and crucial because it
forms the foundation of the entire process. Once
the foundation is strong, the rest of the process
goes smooth. Preparation of the substrate is
important because it will ensure adhesion
between the epoxy product and the substrate. It
is important to keep the floor prepared
beforehand. Without proper preparation, the floor
could fail. Alos, fixing it will turn out to be
more costly too. So, one must never underestimate
the importance of proper surface preparation.
The surface with the slightly rough profile is
needed. It allows the mechanical bonding between
the concrete surface and the epoxy primer. Not
just this, the surface needs to be cleaned and
needs to be kept free of chemicals and oils.
This is necessary because such substances block
the epoxy from sticking to the substrate. Here
are some of the commonly used methods for
preparing the surface like Grinding using a
diamond grinding Shot-blasting Sanding Milling/
scarifying Diamond grinding is one of the most
popular and widely used method to prepare the
surface. To be able to grind the floor, you will
have to use number of grinding tools depending
on the requirement. For instance, to grind the
rough concrete, you would require aggressive and
coarse diamond tool. In case you want to give the
existing surface a light sanding, you can choose
a high grit sanding tool.
5
Cleaning the Floor
In this step, you are required to vacuum the
floor. Before applying the epoxy, you would need
a clean floor free of dust or any residue. This
step is important because if cleaning is not
done Dirt particles will make your floor look
dirtier. The dirt particles will get trapped
within the coat. Adhesion will significantly get
weak. The less micro-dust, the less primer you
will need. Use industrial vacuum to clean the
surface as it picks even the smallest dust
particle and also has suitable filters.
6
Steps to Apply Epoxy Coat
The epoxy flooring contractors in Melbourne use
the following steps like
Prime the Floor Once you have cleaned the floor,
the next step is to create a surface which will
allow the epoxy to bond the substrate. To make
this happen, the epoxy installers apply epoxy
primer. Applying primer is important because It
gives the floor a long-life i.e., increases
durability Reduces emergence of bubbles and
gases in the epoxy Minimizes absorption Increases
ease of maintenance It is eco-friendly Also, it
is a better adhesion to the substrate. Not just
this, by priming the floor, the quantity of
products used in later stages of epoxy flooring
also reduces. At the same time, ensure that the
areas are properly ventilated. In some cases, if
you will apply the primer, you may notice that
the product gets really quickly absorbed by the
substrate. This happens when the floor is dusty
and made of soft cement. After the first one,
apply a second coat of primer. Use electrical
mixer and mix A and B component of the primer.
7
Use Epoxy Grout and Fill the Cracks, Holes
Before coating, eliminated all the holes, dents
and cracks from the floor. Large holes and gaps
are filled in advance with the help of fast
drying cement mortar. Complete this step in the
beginning before grinding and applying the
primer. If the cracks and holes are small, fill
them either before or after applying the primer.
8
Types of Epoxy Fillers
There are different epoxy fillers. Either use
100 clear epoxy resin and mix it in with a
filler, such as quartz sand and calcium
carbonate. Add the filler as required to get the
desired texture and thickness of the product. If
mixing clear resin and adding filler is too
complicated, adding epoxy patching grout will
make it less messy. After that, leave the epoxy
putty to dry. Most probably, it will require
sanding before proceeding to the next step.
9
First Coat of Epoxy Paint
All the above steps can take few days. After you
are done with the above steps, this is the time
that requires applying the first coat. The first
coat helps in revealing the floor. The first
layer of colored epoxy will show the actual
substrate. After the first coat, the remaining
cracks and holes will be visible. The first coat
of epoxy is applied with the help of a roller or
a squeegee. If there are many small dents and
microscopic holes in your floor, squeegee is
used to create a first layer a filler
coat. Before starting the process of coating, all
contents of the hardener are emptied in the
component. Mix everything for two minutes with
the help of an electrical mixer. Do not skimp on
the mixing. This is one of the most important
steps because if mixing is not done well, it will
lead to a tacky floor. The professional epoxy
installers work in a group so they have enough
helping hands to work on a single project at a
time. It is never advised to apply epoxy on your
own because the product tends to have a short
pot life like for 30-45 minutes only. So, you
would always need a help whenever applying
epoxy. If you apply a roller, using a good
quality roller is suggested because the
poor-quality rollers may start to shed. Also use
a paint brush and masking tapes to deal with
edges.
10
Final Sanding
This step is not the final but equally vital as
it comprises of final sanding. After 16-24
hours, the first coat must have dried up, making
way for the next steps to follow. You may come
across problems like new cracks and holes after
applying the first coat. Also, at the same time,
dust and debris may get trapped on the first
coat. If you apply the first coat with the help
of squeegee, lines may get visible. You would
need to slightly sand that area to eliminate the
marks that may be visible on the final floor. If
the dust gathers, use a vacuum cleaner to collect
the dust. You can also use an epoxy thinner to
wipe away the left-out dust. Make sure that all
the new holes and cracks are sealed before
beginning the process. If necessary, wait for
another day for the grout to dry up before
re-coating it.
11
Application of the Final Coat
Final step comprises of applying the epoxy coat.
Even before the final step, the entire area is
cleaned and taken care of. For this step, use a
high-quality roller. Some like to spread the
coating mixture with a squeegee. Then use a
roller to get a uniform surface. If the surface
you are applying epoxy coating to is too
problematic, then you may need a third coat to
make the surface look perfect. If you hire the
epoxy flooring contractors in Melbourne, you will
see the epoxy experts following the similar
steps as described above. To get the best
services, contact the best flooring contractors,
i.e., Tuff Build and know more about the
services.
12
Get In Touch
5 Lord Place, Point Cook, Vic, 3030 61 432 521
274 info_at_tuffbuild.com.au Content Resource
https//epoxyflooringau.wordpress.com/2021/12/14/s
teps-epoxy- experts-follow-to-apply-epoxy-floor-p
aint/
13
(No Transcript)