Measurements of the Climateforcing Properties of Atmospheric Aerosols - PowerPoint PPT Presentation

Title: Measurements of the Climateforcing Properties of Atmospheric Aerosols


1
Measurements of theClimate-forcing Properties of
Atmospheric Aerosols

• John Ogren
• NOAA Climate Monitoring and Diagnostics Laboratory

2
Aerosol Effects on Climate

• Direct Effects
• Aerosols scatter and absorb visible and infrared
  radiation
• Could cause warming or cooling
• Depends on size distribution and index of
  refraction of the particles, as well as albedo of
  the underlying surface

• Indirect Effects
• Cloud condensation nuclei (CCN) and ice nuclei
  (IN) are precursors for all cloud particles in
  the atmosphere
• CCN and IN influence cloud optical and
  microphysical properties
• Possible effects include changes in Earth's
  albedo and changes in hydrological cycle

3
Estimates of Global Mean Radiative Forcing
Confidence level High Low Low Low Very Very Very
Very low low low low
"The balance of evidence suggests a discernible
human influence on global climate (IPCC, 1996)"
4
Placeholder (4 slides)

• Kiehl and Briegleb, GHG forcing
• Kiehl and Briegleb, sulfate forcing
• Kiehl and Briegleb, GHGsulfate forcing
• Santer et al., spatial pattern matching

5
CAVEAT

• Aerosol cooling and greenhouse warming cannot
  offset each other, because
• The effects occur at different times and in
  different parts of the atmosphere,
• Leading to a change in the differential
  heating/cooling that drives the general
  circulation of the atmosphere.

6
Uncertainties Of Parameters Used To Estimate
Direct Aerosol Forcing Of Climate
Source Penner et al. (1994)
7
Scientific Questions

• What are the means, variabilities, and trends of
  the climate-forcing properties of different types
  of aerosols?
• What chemical species are responsible for these
  properties?
• What are the factors that control these
  properties?

8
Sampling Strategy forCMDL Aerosol Monitoring
Program

• We can never achieve adequate global coverage
  with a ground-based sampling program.
• Recognizing this, our strategy is to characterize
  key optical, chemical, and microphysical
  properties of a number of aerosol types that are
  needed for development and validation of global
  models and satellite data retrieval algorithms.

9
Key Aerosol Types For Evaluating Climate Forcing
By Anthropogenic Aerosols
10
CMDL Aerosol Network
Barrow
Sable Is.
Hungary
Bondville
Mauna Loa
So. Great Plains (ARM)
Samoa
South Pole
11
Parameters controlling aerosol forcing
D daylight fraction S0 solar constant Tat atmosphe
ric transmission Ac cloud fraction Rs surface
albedo
DF average aerosol forcing at top of
atmosphere (TOA) d aerosol optical depth
Source Haywood and Shine (1995)
12
Linking up-scatter optical depthto aerosol
chemical composition
13
Aerosol climate-forcingproperties observed by
CMDL

• Routinely
• sspd, d, w0d
• wavelength dependence of sspd, d
• and at regional sites
• bd (surrogate for b)
• M (coarse/fine, total and ions)
• a (mass and ions)

• Intensive campaigns
• fs (RH), fb (RH)
• vertical profiles of sspd, w0d, bd, l-dependence
  
• Missing
• fw (RH), f (RH,z)
• a (z)
• M (carbon, dust)

14
KEY FEATURES OF CMDLAEROSOL SAMPLING SYSTEM

• Heated inlet, so that all size cuts and optical
  measurements are performed at a low relative
  humidity. The sample is heated just enough to
  maintain the RH below 40 and the temperature
  below 40 C.
• Measurements performed on two size-fractions, Dp
  lt 1.0 mm (fine particles) and 1 lt Dp lt 10 mm
  (coarse particles) diameter.
• Optical and chemical measurements are
  synchronized so that they can be related
  quantitatively.
• Real-time contamination control using Ntot, wind
  speed, and wind direction.
• Highly-automated so that minimal operator
  attention is required.

15
NOAA Aerosol Sampling Inlet

• 10 m agl inlet stack, 20 cm diameter, 50 cm/s
  flow velocity
• 2.4 m stainless steel tube, 5 cm diameter, 130
  cm/s velocity, heated to RH ? 40
• Split into 5 lines, 1.9 cm dia, 30 lpm each
• 10 mm impactor, then switched 1 mm impactor
• Filtered pump exhaust

Barrow, Alaska
16
NOAA Aerosol Sampling System

• TSI integrating nephelometer (ssp, sbsp, 3
  wavelengths)
• Radiance PSAP (sap, 550 nm)
• Real-time contamination control using TSI CN
  counter and winds
• Sample handling in glove box

17
NOAA Aerosol Sampling Rack

• Switched impactor for D lt 1 mm and D lt 10 mm size
  ranges.
• Large particle (1 lt D lt 10 mm) impactor and
  8-filter holder for submicrometer particles.
• Gravimetric and IC analyses.
• Automated CO2 span check system for nephelometer.

18
Arctic Haze has Decreasedat Barrow, Alaska since
the mid-1980s
Parameter plotted is atmospheric aerosol light
scattering coefficient at 550 nm (1/Mm)
19
Aerosol single-scattering albedoat Bondville,
Illinois
Values are daily averages for l550 nm, RHlt40,
Dlt1 mm
20
Aerosol Chemical Compositionat Bondville,
Illinois (1995)
Speciation of other based on 4-weeks of data
21
Sensitivity of aerosol forcing to observed
variation in aerosol properties at Bondville
frequency
forcing per unit optical depth (W m-2)
IPCC (1995) temperature change predictions used a
single value and considered only scattering.
22
3-D Isentropic Airmass Trajectories

• Sector boundaries guided by SO2 emission field
• Cases were included only if the trajectory stayed
  in a single sector for five days prior to
  arriving within 200 km of Sable Island
• Data averaged for 2 hours, centered on trajectory
  arrival time

Clean Continental
Polluted Continental
Marine
23
Wavelength-dependence of aerosol scattering is
controlled by coarse/fine mix
Ångström exponent (å)

• Daily averages from Sable Is., 8/92-6/97,
  550/700 nm wavelengths

f
24
Aerosol Extensive Properties atSable Island by
Trajectory Sector
Light scattering (Mm-1)
Light absorption (Mm-1)
25
Aerosol Intensive Properties atSable Island by
Trajectory Sector
hemispheric backscatter
single-scattering albedo
26
Hygroscopic growth at Sable Island

• polluted

• marine
• polluted

fb(RH)
fssp(RH)
relative humidity
relative humidity
1. Chemical composition controls hygroscopic
growth.
2. Backscatter fraction decreases with increasing
RH.
27
Aerosol Forcing Efficiency (W m-2)at Sable
Island by Trajectory Sector
absorption effect (D lt 1 mm)
size dependence
28
Calculation of aerosol opticaldepth from surface
observations
fs(RH) 1.5 ? 0.2
calculated fromssp, f(RH), lidar
measured with shadowband radiometer
Measurements from Southern Great Plains site.
Lidar and radiometer data provided by DOE/ARM
program.
29
Surface aerosol properties in southeast USA may
represent the column
altitude (m agl)
Results are for RH lt 40, D lt 1 mm.
30
NOAA/CMDL Measurements of Single-scattering
Albedo
31
Aerosol RadiativeProperties in Mexico City
single-scattering albedo
light scattering coefficient (Mm-1)
Black bars denote night-time. Observations were
at a wavelength of 550 nm and relative humidity lt
40.
32
CMDL Aerosol Monitoring Highlights

• Observations of aerosol climate forcing
  properties reveal pronounced differences for
  different aerosol types, with variabilities that
  are large compared with the values used in
  current models.
• More species than sulfate make significant
  contributions to aerosol radiative forcing.
• Aerosol hygroscopic growth depends strongly on
  chemical composition.
• Surface measurements can be representative of the
  vertical column.

33
Conclusions

• DF/Dd is a useful concept for combining different
  measurements and for comparing results from
  different cases or sites
• Consideration of scattering only suggests that
  some models may be underestimating the sulfate
  forcing by about 30
• Aerosol radiative properties exhibit considerable
  variability, in both upscatter fraction and
  single-scattering albedo, which is not included
  in current models