Title: WIDIA
1WIDIA
Selection of operating parameters - WIDIA
- Recommended data for turning ferrous materials
- Krupp Widia
2Scope of the recommended cutting data
- rake angle is negative, the cutting speed
lowered by 10 to 15
- approach angle -30o to 30o
In the case of cutting, relief angle 0 to 30o
- Tool life 5 - 30 minutes all the tables are
made based on tool life 15 minutes, but
conversion factors are provided for tool life 8,
30, 60 minutes (page 1.7)
3Work Material
- According to machinability, we can divide work
materials into groups to which different tables
correspond - A) Steel and cast steel
- Machinability groups 1-10
- B) Cast iron
- Machinability groups 11-18
- C) High-alloy and stainless 21 -26
Machinability The amount of wear the work
material induces in the cutting tool material
(Zv)
4WM Factors for materials and for tools
Cutting data WM x data from table
Examples
Machine tool in particularly poor condition
WM0.8...0.95
Machine tool in particular good condition
WM1.05...1.0
Forging, rolling or casting skin
WM 0.7...0.8