Finding AMAG Software Version

1
Finding AMAG Software Version

• From client go to Help menu gt About.
• In About you will find software versions number.
• Note older systems my look different.

2
Finding AMAG Hardware Version

• From client go to Tools menu gt Node Status

3
Finding AMAG Hardware Version

• Click on Find button gt

4
Finding AMAG Hardware Version

• Highlight one or all of the nodes you want to
  check.
• Click on Open gt

5
Finding AMAG Hardware Version

• Each node will show Node Name, Current Version of
  each Door Controller connected, and Current
  Status.

6
HSE Compliant Versions

• Minimum Software Version is 5.0.1 HSE
• Current version is 6.1
• Controller hardware required is M2000 or M2100
  series controllers.
• DBU Version 3.0
• 4DC Version 3.3
• 2DC Version 2.1
• AMAG readers which read PIV II cards are 843 and
  853 with latest flash V1P17.mot

7
Migration

• Software can be updated to latest version.
• Software required to be under software support
  agreement.
• M2000 and M2100 series controllers are field
  flashable to current version.
• 843 and 853 readers are field flashable to
  current version.

8
Compliant system requirements

• Software version 5.0.1HSE or higher.
• M2000 or M2100 Series controllers running current
  version.
• 843 or 853 series readers running version
  V1P19.mot
• Our 844 reader is GSA APL approved and can also
  be used on new installations or as replacement
  readers.

9
Required information for quoting software upgrade

• On the back of the server is a dongle, similar to
  a USB thumb drive.
• On the dongle you will find a system serial
  number, this number is required for dealers to
  quote support agreements.
• Note, dongle on older systems my be connected to
  COMM port.