CREATION OF COMPONENTS OF WATER PUMP

1
CREATION OF COMPONENTS OF WATER PUMP AND PUMP
ASSEMBLY Concurrent Engineering I Week-5
Application DESIGN Task MASTER MODELER
2
STEP 1
GET BLOCK FROM PARTS CATALOG
3
STEP 2
SKETCH TWO CIRCLES ON PLANE

4
STEP 3
1) EXTRUDE CIRCLES
2) NAME THIS PIVOT BLOCK
5
STEP 4
1) SKETCH ABOVE SHAPE AROUND PIVOT BLOCK AND
FILLET
2) EXTRUDE WIREFRAME TO CREATE PIVOT SUPPORT
6
STEP 5
SKETCH A CIRCLE ON VERTICAL PLANE AND EXTRUDE TO
CUT HOLES IN PIVOT SUPPORT
7
STEP 6
MOVE PIVOT SUPPORT USING MEASURE AND MOVE COMMANDS
8
STEP 7

• PUT AWAY PIVOT BLOCK

• SKETCH CIRCLES ON BOTTOM PLANE OF PIVOT SUPPORT

• EXTRUDE CIRCLES INTO A PIPE

• PUT AWAY PIVOT SUPPORT

9
STEP 8

• BLOCK GET PIVOT

• SKETCH CIRCLES AS SHOWN

10
STEP 9

• HANDLE TEXRUDE CIRCLES TO CREATE A NEW PART
  CALLED

• PUT AWAY PIVOT BLOCK AND HANDLE

11
STEP 10

• GET A TUBE FROM PARTS CATALOG

• NAME THIS WELL CASING

• SKETCH THE SHAPE SHOWN

12
STEP 11

• REVOLVE THE SHAPE TO CREATE THE WELL SEAL

• PUT AWAY WELL SEAL AND WELL CASING

13
STEP 12
CREATING THE TEE

• GET TWO CYLINDERS FROM PARTS CATALOG

• JOIN THE TWO CYLINDERS USING JOIN COMMAND

14
SKETCH A CIRCLE ON TOP FACE OF TEE
SKETCH A CIRCLE ON SIDE OF TEE
EXTRUDE THIS CIRCLE
EXTRUDE THIS CIRCLE
15
FILLET THE INTERSECTION
16
STEP 13
ALIGN WELL SEAL AND TEE
17
STEP 14
SKETCH A CIRCLE ON TOP FACE OF TEE AND EXTRUDE TO
CREATE A NEW PART GUIDE PIPE
18
STEP 15

• PUT AWAY WELL SEAL AND TEE

• SKETCH IN PLANE AROUND GUIDE PIPE AND REVOLVE TO
  CREATE NEW PART CALLED STROKE SLIDE

• PUT AWAY GUIDE PIPE

19
STEP 16

• SKETCH ON BOTTOM FACE OF STROKE SLIDE

• GET A CYLINDER FROM PARTS CATALOG

20
STEP 17

• JOIN CYLINDER AND STROKE SLIDE

• EXTRUDE EXISTING INNER CICLE TO TRIM

21
(No Transcript)
22
STEP 18
GET PIVOT BLOCK
EXTRUDE TO CREATE OFFSET LINK
SKETCH THE ABOVE SHAPE
23
STEP 19

• SKETCH CIRCLE ON SIDE OF OFFSET LINK

• EXTRUDE TO CUT A HOLE

24
STEP 20
CUT OFFSET LINK WITH STROKE SLIDE TO CREATE THE
HOLE
25
STEP 21

• CREATE OFFSET LINK COPY

• ROTATE THE COPY
• 180 ABOUT Y AXIS

26
STEP 22
ASSEMBLE ALL PARTS
27
CHECK ALL PARTS INTO A LIBRARY CALLED PUMP
PARTS To do this 1)Select the Manage Bins
icona form appearsselect a part e.g..Guide
Pipe 2)Select check in 3)Name the Library Pump
Parts 4)Select the Check-in,Keep for reference
box Repeat for all parts
28

• CREATING THE PUMP ASSEMBLY
• Create a new model file using DESIGN and MASTER
  MODELER
• Select Get from Library icon a form appears
• Select ViewParta list of parts appears
• Select each part and click Reference
• Repeat for all parts
• Change task from Master Modeler to Master
  Assembly

29
PUMP ASSEMBLY HIERARCHY PUMP ASSEMBLY LINK
ASSEMBLY OFFSET LINK OFFSET LINK PIPING
ASSEMBLY WELL CASING WELL SEAL TEE GUIDE
PIPE HANDLE ASSEMBLY HANDLE PIVOT
BLOCK PIVOT SUPPORT STROKE SLIDE
30
STEP 1

• Select the HIERARCHY icon to bring up the
  hierarchy form
• Select ADD PARENT icon to add a parent assembly
  called Link Assembly
• Dismiss the form
• Bring up the Hierarchy form again and select
• Link Assembly
• Add Offset Link as a sub assembly to this assembly

31
STEP 2

• Rotate this entity 180 about Y
• Add another instance of OFFSET LINK to
• the Link Assembly

32
STEP 3

• Assembly ,Pivot Support and Bring up the
  HIERARCHY form
• Select Link Assembly
• Select ADD PARENT and add PUMP as a Parent
  Assembly
• Add Handle Assembly,Piping Stroke Slide to PUMP

33
STEP 4

• Bring up the HIERARCHY form
• Select the Piping Assembly
• Select the Add To icon and add Well Casing,
• Well Seal,Tee and Guide Pipe to this assembly

34
STEP 5

• Bring up the Hierarchy Form
• Select the Handle Assembly
• Select the Add To icon and add Pivot Block and
  Handle to this assembly

35
STEP 6

• Select the Manage Configurations to bring up a
  form
• Make a copy of the existing configuration and
  call it Angle 0
• Make another copy and call it Angle 10 and make
  this configuration active
• Rotate the Handle Assembly by -10 about the X
  axis

36
TO CREATE AN ANIMATION SEQUENCE

• Open the Manage Configuration Form
• Select the first configuration (Config1) as the
  active configuration
• Dismiss the form
• Select the Create Sequence icon..to bring up a
  form
• Add Angle 0 and Angle 10 configurations to the
  sequence
• Dismiss the form
• Select the animate icon to animate the sequence
  created above.

37
(No Transcript)