Expanda Stand Carousel Display System

1
Expanda Stand Carousel Display System

• India Distributor

Les Expressions Corporate Services Pvt. Ltd.
Flat No.4, 2ND Floor, Sapathagiri Apatments, 83,
T.T.K Road, Alwarpet, Chennai 600 018. Fax
044-4980832. enquiry_at_lesexpressions.com Call Us
At 044-24988823 / 24 / 25 Fax [phone]
2
Proceed
Carousel Brochure Display System
for a Step By Step Installation Procedure ...
3
Packaging

• The Entire System is packed in a Box

Closed Box
Open Box
4
Contents
5
Hub
A standard system consists of A central
connecting hub ...
6
Legs
5 legs to support the system ...
7
Metal Pipes
Two metal pipes of different sizes ...
8
Stoppers
Three stoppers ...
9
Triangular Spinner
Three spinners
10
Branding Holder
And a four way branding holder top.
11
Assembling Your Carousel Stand
12
Connecting the legs to the hub.
Hold the hub and legs in the inverted position
and insert the leg as shown...
13
Connecting the legs to the hub.
Press down to hear the snap lock ...
14
Connecting the legs to the hub.
It should appear as shown. Connect the rest in
the same manner ...
15
Connecting the legs to the hub.
In the same method connect all the five legs
16
Connecting the legs to the hub
The hub with all 5 legs assembled ...
17
Connecting the legs to the hub.
Normal view
The hub with all 5 legs assembled ...
18
Connecting the pipes to the base.
One pipe is shorter than the other. On one end
of the shorter pipe there is a sleeve inside
and one end of the longer pipe is tapered
19
Connecting the pipes to the base.
Insert the longer pipe with a slight twist into
the sleeve end of the Shorter pipe (see the
next)
20
Connecting the pipes to the base.
Longer pipe with one end tapered Insert the
tapered end into the sleeve ringed pipe
21
Fixed Pipe With Base
Insert the assembled pipes into the central hub.
22
Fixing The Stopper
Insert the stopper ring through the pipe
23
Connecting the stopper to the pipe.
Tighten the screw at a convenient height as
desired by you.
24
Fixing The Triangular Spinner
Insert the triangular spinner (Note Position
the spinner with stubs pointing upwards)
through the pipe to rest on top of the stopper.
25
Fixing The Triangular Spinner.
One Triangular spinner now rests where the
first stopper is fixed
26
Fixing The Triangular Spinner
Fix the rest of the spinners in the same manner.
27
Fixing The Branding Holder
Fix the branding holder on top end of the pipe.
28
Fixing the Brochure Holders
There are two clips in the Brochure Holders.
Press them gently and insert the holder in the
Triangular Spinners till you hear the click
sound
29
Fixing the Brochure Holders.
Carousel Stand with One Brochure Holder fixed
on the top spinner
30
Adding More Brochure Holders
Keep adding brochure holders as per your
required combination on all the three
triangular spinners.
31
The Fully Assembled Carousel
Now your carousel is ready for use.