ZOLL M SeriesE Series Biphasic: Data Management SelfPaced Training Module

1
ZOLL M Series/E Series Biphasic Data Management
Self-Paced Training Module 11
2
Objectives

• At the end of this module the participant can
• Use the Summary Report
• Identify three events that will trigger a Summary
  Report
• Add the Patient Name and ID Number to Summary
  Report

3
Events That Will Trigger a Summary Report

• Defibrillator shock or pushing the Analyze button
  (Advisory or AED)
• VF rhythm detected (Advisory or AED)
• Selecting Pacer Mode
• Alarm Trigger
• 12-lead acquired (if unit has 12-lead option)
• Code marker entered (if unit has code marker
  option)

4
Summary ButtonPrinting a Full Summary
Press the Summary button Summary Menu Press
the Print Chart softkey Press the Print All
softkey Press the Recorder button to stop
printing the report
5
Summary buttonprinting a partial summary

• Press Summary button
• Summary Menu
• Press the Print Chart softkey
• Press the Print Range softkey
• Press Prev Event or Next Event softkey to select
  the first event for Printing
• Press the Print softkey

6
Printing an Incident Log An abbreviated list of
all events recorded in the summary report which
includes the time of occurrence.

• Events such as the following
• Defibrillator turned on
• Defibrillation advisory messages
• Defibrillation shocks (including energy levels)
• Pacer mode activated
• Alarms triggered / Code markers
• Press and release the Summary button
• Press the Print Log softkey

7
Changing Paper for Recording

• Locate paper tray at bottom, front of unit
• Press down on ridge below label for the paper
  tray
• Slide tray out

8
Changing Paper

• Unfold first square of new paper and place in
  machine
• Red grid faces up, black arrows point away from
  the machine
• Place paper in machine with extra square hanging
  out of the tray
• Slide door shut while pressing the release label
• Press Recorder button to confirm proper placement

9
If Time or Date Are Incorrect

• Press the far right softkey at the bottom of the
  screen (difficult to see on illustration)
• Hold for 4 seconds while turning the selector
  switch on or to monitor (gray)
• Next field softkey will appear
• Press IncgtValue or DecltValue softkey to change
  value
• Press Enter and Return
• Example of softkeys

10
Code Marker Button

• Code markers are an option on the M Series/E
  Series to document therapies and intervention
  times
• The three models of the
• M Series/ E Series have different code makers in
  each mode
• Monitor (Gray) Mode
• Defib (Red) Mode
• Pacer (Green) Mode

11
Code Marker Menu

• Softkey ACLS therapies appear once the Code
  Marker button has been pressed
• Press the softkey appropriate therapy or the More
  softkey to display other therapies/drugs
• If no softkey is pressed within 10 seconds, a
  default will appear on the summary report

12

• This concludes Module 11
• Data Management
• Please continue on with other modules which may
  be required at your facility