Title: EuroACE presentation
1Marketing Energy Efficiency for Buildings
2What if
- it was a legal requirement that buildings had to
be certified for their energy performance? - the certificate had to include recommendations
for investments in energy efficiency? - large buildings had to be upgraded to present
requirements for energy performance, when they
undergo renovation?
3What if
- minimum energy performance requirements in
national building codes had to be updated every 5
years? - boilers and air-conditioning systems had to be
inspected regularly for performance?
4Would
- purchasers and tenants demand higher standards
of energy efficiency in buildings? - builders and contractors need more energy saving
products? - regulators continually improve national building
codes?
5The Answer
Probably YES
And the good news is
6New Rules from the EU
by 4 January 2006
In each EU country (including accession
countries) these rules will have to be in place
Thanks to a new EU law on the energy performance
of buildings
7Why Was Action Needed?
Climate Change More than 40 of all energy
consumption is from buildings
8Why Action at EU Level?
Need for European framework to promote energy
efficiency in buildings
Inadequate levels of energy efficiency across
Europe
9How is This Happening?
European level
National level
National governments must turn these rules into
national laws
European rules agreed
Effects on building designers, builders, owners,
occupiers
2003
2006
10The New Rules in Detail
- By end of 2005, National governments will have
to - Calculate the Energy Performance of Buildings
through a common framework using a methodology
that takes into account a variety of factors - Apply minimum energy performance requirements to
all new buildings (and revise every five years) - Apply minimum energy efficiency standards to
existing buildings (over 1000m²) undergoing major
renovations - Define who is qualified to provide certification
services
11The New Rules in Detail
- By end of 2005, National governments will have
to - Establish energy certification schemes for all
buildings - All newly constructed buildings
- All public sector buildings
- All large buildings visited by the public
- All buildings changing occupation (sale or rent)
- Unless the government does not have sufficient
trained staff to deliver (in which case it will
be delayed until 2008) - Introduce inspections of boilers and cooling
installations - Every 2 years but
- Only every 4 years for gas
exemptions apply for certain categories of
building (e.g. monuments, places of worship.
temporary buildings)
12The New Rules in Detail
- From 2008 onwards
- Calculation methodologies will have to be
re-examined - Every 2 years
- Certificates will not be allowed to be more than
10 years old
13And Their Impact?
Push and Pull
14The Push Using Market Forces
- New Rules
- When buildings are constructed, sold or rented
out an energy performance certificate is to be
made available to the buyer or tenant - Public Buildings to set an example and to be
certified regularly and visibly - All large buildings visited regularly by the
public to display energy certificate prominently
exemptions apply for certain categories of
building (e.g. monuments, places of worship.
temporary buildings)
15The Push Using Market Forces
Effect
Ease of comparison allows construction industry
to use information as a marketing tool
?
Increased information to purchasers and tenants
may be used in decision whether to take
possession of the property or not
?
Certification may lead to public naming and
shaming of public buildings that have high
energy inefficiency
?
16The Pull Legislative Requirements
- New Rules
- Calculation of energy performance of buildings on
basis of methodology including variety of factors
- National governments to elaborate minimum
standards based on the methodology - Minimum standards are to be applied to new
buildings and in the major renovation of large
existing buildings - Minimum Standards to be reviewed every five years
- Effect
- Builders made to buy and use energy efficient
products in all new buildings and major
renovation works
17And the Impact on Emissions?
- The European Commission estimates that these new
rules will save 45 million tonnes of CO2 a year,
which represents 21 of the EUs Kyoto target for
2010
100
- Although positive, energy efficiency savings
could still deliver massive amounts of savings
with the right political will
Even greater savings through energy efficiency
could be delivered through further legislation
21
Will be achieved
18What Happens Next?
- At the National level
- National governments must now implement the new
EU rules by passing national laws that achieve
the objectives set-out - EuroACE member companies should therefore
- Ensure national legislation is passed and that it
is on time or before the deadline and includes
all the measures - Engage government to ensure that the new
calculation methodologies are as thorough as
possible - Encourage government to voluntarily lower the
threshold standards to apply them to renovations
of buildings less than 1000m2 - Spread the news
19What Happens Next?
- At EU level
- The EU will consider strengthening the
requirements and promoting the new rules - EuroACE will therefore
- Continue to campaign for stronger legislation
- Engage EU authorities to do more to promote
energy efficiency
20In Conclusion
Although the foundations have been laidmuch work
is still to be done
21However, If We Work Together
NationalEuroACE Members
National Authorities
European Authorities
EuroACE
22We Can Accomplish the Task
Move towards combating climate change
Fulfil commitments of legislation
Be able to compare energy performance of
different buildings
23We Can Accomplish the Task
Sell more energy efficient products
24(No Transcript)
25What should be included in energy performance
methodology?
- Where relevant
- Active solar systems and other heating and
electricity systems based on renewable energy
sources - CHP electricity
- District or block heating cooling
- Natural Lighting
- At least the following
- Thermal characteristics (incl. Insulation glazing
and air tightness) - Heating installation (incl. hot water)
- Hot water
- Air Conditioning
- Ventilation
- Built-in lighting
- Position orientation of building
- Passive solar systems and solar protection
- Natural Ventilation
- Indoor Climatic Conditions
26Who We Are
Since 1998, Europe's leading companies involved
with the manufacture, distribution and
installation of a variety of energy saving goods
and services have worked together as The European
Alliance of Companies for Energy Efficiency in
Buildings (EuroACE)
- Armacell International
- BPB
- Danfoss
- Dow Europe
- Giacomini
- Grundfos
- Huntsman Polyurethanes
- Knauf Insulation
- Paroc
- Philips Lighting
- Pilkington
- Rockwool International
- Saint-Gobain Isover
- Saint-Gobain Glass
- Siemens
- Skanska
- VELUX
To find out more visit www.euroace.org