Title: Welcome to Fermilab
1Welcome to Fermilab
2Cryogenics Why Fermilab Has Caught the Uncommon
Cold
- March 6, 2005
- Tom Peterson
- Cryogenic Engineer, Fermilab
- Tommy_at_fnal.gov
3What Fermilab does -- accelerate subatomic
particles for physics experiments
4Fermilab is the worlds highest energy particle
accelerator
5(No Transcript)
6Linac A view of the linear accelerator or
linac
7Linac Radio-frequency accelerating cavities or
RF cavities RF cavities accelerate the
particle beam
8Main Injector (and Recycler)
- A view in the
- tunnel of the
- next-to-final
- stage of
- acceleration --
- Main Injector
- Electro-magnets
- steer and focus
- the particle
- beam
9Tevatron A view in the tunnel of the final
stage of acceleration -- the Tevatron
Electro-magnets steer and focus the particle
beam
10The DZero detector
11Collider Detector (CDF) particle tracks
12How the magnets work-- electric current creates
a magnetic field that steers and focuses the
particle beam like a lens
Particle beam in a dipole (bending or steering)
magnet
13A conventional accelerator magnet
Copper, carrying electric current
- Electric current in copper bars
- Magnet enclosed in iron
- Particle beam in central, evacuated beam tube
Iron
Particle beam
22 / 559mm
14A superconducting accelerator magnet
Support
Heat Exchanger
Helium pipes
Thermal Shield
Cold Mass
Beam tube
Vacuum Vessel
15A superconducting accelerator magnet
Liquid helium cooling channels
- The cold mass in the previous slide contains
the actual magnet - Cross-section of the cold mass is shown here it
looks a lot like the conventional magnet - The magnet structure within and outside of the
cold mass is complicated by the requirement of
very low temperatures
Particle beam
Superconducting Cable
Iron
16Superconductivity
- Accelerator magnets must be very powerful
- Superconductors can carry more electric current
than copper - Superconducting magnets can be more powerful than
the strongest conventional (copper and iron)
electromagnets
17Superconductors only work cold
18Superconductors only work cold
- Chicagos record cold -27 F (Jan 20, 1985)
- Dry ice -109 F
- Lowest recorded temperature on earth -129 F
(Vostok, Antarctica, July 21, 1983) - Liquid natural gas (LNG) -256 F (113 K)
- Liquid air -321 F (77 K)
- Liquid helium -452 F (4.2 K)
- Fermilabs superconducting magnets are cooled to
as low as -456 F (1.8 K) - Absolute zero is -459.67 F (0 K)
19Superconductors only work cold
20Coldest liquids
21Cryogenics
- The science of generating extreme cold, generally
defined as LNG temperature - (-256 F) and lower, is called Cryogenics
22The Tevatron Cryogenic System
- 4 miles of superconducting magnets
- Over 10,000 gallons of liquid helium
- Even more liquid nitrogen
- Over 8 megawatts of input power
- About 20 kW of cooling at liquid helium
temperature (heat always leaks in, which we
have to remove) - One of the worlds largest cryogenic systems
23Problems at low temperatures
- Brittle materials
- Lubricants freeze solid
- Water and even air freeze and plug pipes
- Must minimize heat into the liquid helium
- Need to measure temperatures, pressures, flows,
etc.
24How do we handle the cold stuff?
- Stainless steel
- Some plastics are OK
- Vacuum insulation
- Multi-layer insulation
- Optimized supports
- Very clean helium
- Special methods for measurements
25Photographic tour of a cryostat--here assembly
has just started
26Liquid helium vessel will hang from thin rods
27Helium vessel is hung, some piping is done
28More piping is done
29Wrap vessel and piping, cover with copper
thermal shield
30Wrap the copper thermal shield
31Weld a vacuum-tight steel container around it
32A super- conducting magnet built by Fermilab
for LHC at CERN in Geneva, Switzerland Illust
rates the same layers as just shown--inner pipes,
thermal insulation, steel vacuum container
33How do we make the cold?
- The fundamental knowledge needed for
refrigeration came out of 19th century efforts to
understand the relationships among temperature,
pressure and energy in gases, particularly how to
harness steam for work. - The key gas cools when it expands (when it does
work).
34A conceptual refrigerator
35Now make the process continuous
36A simplified refrigeration cycleKlaus D.
Timmerhaus and Thomas M. Flynn, Cryogenic
Process Engineering, p.126
Compressor
Expander
37A typical modern helium cycle(but simplified,
from Linde Kryotechnik, AG)
- The Claude process, shown to the right,
includes intermediate temperature expanders - Modern cryoplants follow this pattern
- Modern cryogenic plants each have many
turboexpanders
38A flow scheme for a cryogenic refrigerator
Expanders are red, compressors are blue, heat
exchangers are yellow
39Photographic tour of the Magnet Test Facility
helium liquefier
40Helium compressor (1000 Horsepower!)
41Compressor cooling water--this is where the heat
goes!
42Pipes! Lots of pipes, and gas vessels
43Heat exchangers (hidden in a vacuum container),
expanders (also hidden) and dozens of valves
44Helium Turbo-expander
- Linde turbine at right
- Expansion turbines are typically used in helium
refrigerators larger than about 500 W. - Real efficiencies (relative to isentropic) are
60 to 80
45A heat exchanger assembly container in better
view--on its side, we are looking at valves on top
46More valves, pipes, control racks, gauges
47End of the line--a magnet being tested
48End of the line--a magnet being tested
49Superfluid helium
- In liquid helium at 2.17 K viscosity disappears
- Thermal conductivity becomes much better than
pure copper - The fountain effect results
- Superfluid helium is used for cooling accelerator
components, including at Fermilabs Magnet Test
Facility (but not in the Tevatron)
50Other cryogenic particle accelerators
- HERA (Hamburg, Germany)
- Jefferson Lab (Newport News, VA)
- RHIC (Brookhaven National Lab, NY)
- SNS (Oak Ridge, TN)
- LHC (at CERN, Geneva, Switzerland)
- But Tevatron was the first!
51Other applications of cryogenics
- Liquefied Natural Gas (LNG)
52Other applications of cryogenics
- MRI in hospitals
- Fast freezing of food
- Preservation of medical specimens
- Cryo-surgery
- Liquid nitrogen shattered the shape-shifting
cyborg in Terminator 2 (but he came back) - The silent drive in Hunt for Red October used a
superconducting magnet