RHS WELD SHOP Power Tool Safety

1
RHS WELD SHOPPower Tool Safety

• Dont operate a machine until
• A) receiving proper instruction
• B) you fully understand how to use it
• C) you have permission
• Always wear eye protection
• Know and understand all the manufacturers
  safety rules
• The operator is responsible for the inspection of
  the equipment prior to operation
  
  
  

2

• Use all safety guards exactly as they should be
  used
• Check to make sure guards are in place and
  functional
• Make all adjustments to the equipment with the
  power off
• Power tools should be inspected and serviced at
  regular intervals by qualified repair people
• It is the responsibility of the operator to
  ensure the equipment is operational prior to
  turning on the power
• Be sure all power tools are grounded with a
  3-wire conductor cord when required
• Before connecting to a power source, make sure
  the switch is OFF

3

• Make sure everyone is clear BEFORE you turn on
  the power
• Always ensure you are operating the equipment
  safely
• Start and stop the machine yourself
• OBSERVE THE MACHINE TO A COMPLETE STOP!!!
• Grinders are slow stopping and could cause
  serious injury to someone if left unattended and
  free-wheeling
• Keep a safe distance between your hands and all
  moving parts
• Always keep your attention on your work
• Do not let your effort wander when using
  equipment
• Operate the machine by yourself - unless you need
  a helper

4

• Never work on a machine or power tools when you
  are TIRED or HURRIED
• Equipment operation requires a sharp attendant at
  the controls
• Always pay close attention to your work and work
  area
• Dont lean or lounge on machines or tables
• Give your machine your full attention.
• Dont look away or talk to others when operating
  shop equipment.
• Never startle, speak, or distract in any way,
  someone who is using a power tool or machine.
• Accidents happen very quickly and without warning
• Always pay attention to your work effort!!!
• Horseplay has no place in the RHS Weld Shop

5

• Be sure your hands are dry
• Electrical equipment can cause electrical shock
  to the operator
• Plan your work before you begin
• Project preparation is a key to completing a
  project successfully.
• High quality projects are obtained with extra
  effort given to preparation.
• When two people work on a machine, THE PERSON WHO
  IS OPERATING THE MACHINE should give all the
  instructions
• Always operate equipment with respect and
  concentration.
• Dont leave a machine unattended while it is
  running!!!!

6
and finally.

• Keep your work area clean clear
• Notify your instructor if anything breaks or
  malfunctions
• Get first aid treatment for every injury
• Be proud of the RHS Weld Shop always give maximum
  effort.