Hearing Conservation - PowerPoint PPT Presentation

1 / 43
About This Presentation
Title:

Hearing Conservation

Description:

UWSP's program is designed to comply with OSHA standards and prevent work-related NIHL ... 90 dB OSHA's Permissible Exposure Level, all employees exposed to ... – PowerPoint PPT presentation

Number of Views:7247
Avg rating:5.0/5.0
Slides: 44
Provided by: haz89
Category:

less

Transcript and Presenter's Notes

Title: Hearing Conservation


1
Hearing Conservation
Developed by Amanda R. Burg June 2006
2
Background
  • Exposure to high levels of continuous noise or
    sudden, impact noise can cause permanent hearing
    loss
  • Noise induced hearing loss (NIHL) is 100
    preventable
  • UWSPs program is designed to comply with OSHA
    standards and prevent work-related NIHL

3
Definitions
  • Noise unwanted any sound that provides no
    information
  • Sound pressure variations in the air that can
    be detected by the ear
  • Attenuation process of reducing sound to
    acceptable levels
  • Sound pressure level of sound wave energy
    measured in decibels

4
Effects of Noise
  • Psychological
  • Physiological
  • Interference with communication, compromising job
    performance and safety

5
Anatomy of the Ear
6
Healthy Ear
  • Hair cells located in the inner ear convert
    vibrations from sound waves into electrical
    signals and send them to the auditory nerve and
    finally to the brain.

7
Damaged Ear
  • Once hair cells in the inner ear are damaged,
    there is almost no regeneration and hearing
    ability is lost.

8
Types of Hearing Loss
  • Tinnitus ringing in the ears often times a
    precursor to hearing loss, caused by damage to
    the ends of hair cells in the inner ears
  • Conductive Hearing Loss occurs when sounds do
    not travel through the outer ear to the middle
    ear efficiently
  • Sensorineural Hearing Loss occurs when there is
    damage to the inner ear or to the nerve pathways
    to from the inner ear to the brain
  • Mixed Hearing Loss combination of conductive
    hearing loss and sensorineural hearing loss

9
How loud is too loud?
10
OSHAs Occupational Noise Exposure Limits
  • Time-Weighted Average (TWA) - a value, expressed
    in dB, which is calculated so that the resulting
    average is equivalent to an exposure resulting
    from a constant noise level over an 8-hour period
  • 85 dB OSHAs Action Level, at an 8-hour Time
    Weighted Average (TWA), OSHA requires employers
    to have a hearing conservation program in place
    to monitor all employees who are exposed to this
    level of noise

11
OSHAs Occupational Noise Exposure Limits
  • 90 dB OSHAs Permissible Exposure Level, all
    employees exposed to an 8-hour TWA above 90 dB
    are required to wear hearing protection and
    employers are required to implement feasible
    engineering and administrative controls to
    decrease the risk of exposure
  • 140 dB OSHAs Maximum Impact Level, exposure to
    impulsive or impact noise should not exceed 140
    dB at any time, regardless of duration

12
Its always a good idea to wear hearing
protection during loud activities, even if noise
levels do not exceed the 85 dB TWA
13
Noise Levels at UWSP
14
OSHAs Occupational Noise Exposure Standard
  • OSHAs Occupational Noise Exposure Standard
  • CFR 1910.95
  • requires six major components
  • Measure and monitor noise levels
  • Conduct audiometric testing of exposed employees
  • Provide hearing protection through the use of
    PPEs, Engineering and Administrative controls
  • Provide employee training
  • Maintain a written program and keep records
  • Allow employee access to information and records

15
1 Measure Monitor Noise
  • Employers should determine if noise levels are
    exceeding 85 dB
  • Develop a detailed noise monitoring program and
    notify employees of the hazard if noise levels
    are exceeding 85 dB
  • Allow employees or their representatives the
    opportunity to observe any noise measurements
    conducted

16
2 Audiometric Testing
  • Employers should establish and maintain an
    audiometric testing program and make it available
    to all employees whose exposure equals or exceeds
    an 8-hour TWA of 85 dB
  • Baseline and annual audiograms are required and
    are to be done by a certified audiometric
    technician baseline tests should be conducted
    within the first six months of the employees
    exposure
  • Each employee's annual audiogram shall be
    compared to that employee's baseline audiogram to
    determine if the audiogram is valid and if a
    standard threshold shift has occurred
  • The results should be evaluated if a Standard
    Threshold Shift (STS) occurs. STS when there is
    a change in a persons hearing threshold of 10 dB
    or more in either ear

17
3 Hearing Protection
  • Employers should make hearing protectors
    available to all employees exposed to an 8-hour
    TWA of 85 dB or greater
  • Hearing protectors shall be available at no cost
    to the employee and shall be replaced as
    necessary
  • Employers shall ensure that hearing protection
    are worn by
  • Any employee over the PEL of 90 dB
  • Any employee who is exposed to an 8-hour TWA of
    85 dB or greater and who
  • Has not had a baseline audiogram established or
  • Has experienced a threshold shift
  • Employees shall be given the opportunity to
    select their hearing protectors from a variety of
    types provided by their employer, employers will
    also provide training and fitting

18
4 Employee Training
  • The employer shall institute a training program
    for all employees who are exposed to noise at or
    above an 8-hour TWA of 85 dB and ensure
    participation in the program
  • The program shall be repeated annually for each
    employee included in the hearing conservation
    program, it should be updated to reflect changes
    in work processes and protective equipment
  • The employer shall ensure that each employee is
    informed of the following
  • The effects of noise on hearing
  • The purpose of hearing protectors, the
    advantages, disadvantages, and attenuation of
    various types, and instructions on selection,
    fitting, use and care and
  • The purpose of audiometric testing, and an
    explanation of the test procedures

19
5 Written Program Record Keeping
  • Employers should maintain an accurate record of
    all employee exposure measurements as required by
    the Monitoring, 1910.95 (d) section of the OSHA
    standard
  • The employer shall retain all employee
    audiometric test records as required by the
    Audiometric Testing Program, 1910.95 (g)
    section of the OSHA standard
  • Records shall be retained for at least the
    following periods
  • Noise exposure measurement records shall be
    retained for at least two years
  • Audiometric test records shall be retained for
    the duration of the affected employees employment

20
6 Access to Information
  • All records required by the OSHA standard shall
    be provided upon request to employees, former
    employees, or representatives designated by the
    individual employee
  • The employer shall make available to affected
    employees or their representatives copies of CFR
    1910.95 (OSHAs Occupational Noise Exposure
    Standard) and shall also post a copy in the
    workplace

21
Occupational Noise Exposure Limits
  • For unprotected ears, the permissible exposure
    limit decreases by ½ for every 5 dB increase in
    the average noise level.
  • For example, exposure is limited to
  • 8 hours a day at 90 dB
  • 4 hours a day at 95 dB
  • 2 hours a day at 100 dB
  • 1 hour a day at 105 dB

22
Hearing Protection DevicesEarplugs
23
Earplugs
  • Disadvantages
  • requires more time to fit
  • more difficult to insert and remove
  • requires good hygiene practices
  • may irritate the ear canal
  • easily misplaced
  • Advantages
  • small and easily carried
  • convenient to use with other PPEs (can be worn
    with earmuffs)
  • more comfortable for long-term wear in hot, humid
    work areas
  • convenient for use in confined areas

24
Hearing Protection DevicesCanal Caps
25
Canal Caps
  • Advantages
  • Convenient to put on and take off
  • Not easily misplaced or lost
  • Easily stored around users neck when not in use
  • Disadvantages
  • Some people find the pressure from the bands
    uncomfortable
  • Earplugs may be a poor fit, blocking little of
    the hazardous noise

26
Hearing Protection DevicesEarmuffs
27
Earmuffs
  • Advantages
  • designed so that one size fits most head sizes
  • easily seen at a distance to help monitor use
  • not easily misplaced or lost
  • less attenuation variability among users
  • Disadvantages
  • less portable and heavier
  • more inconvenient for use with other PPEs
  • more uncomfortable in hot, humid work areas
  • more inconvenient while working in confined spaces

28
Hearing Protection Device Care
  • Follow the manufacturers instructions
  • Check hearing protection regularly for wear and
    tear
  • Replace cushions or earplugs that are no longer
    pliable
  • Replace a unit when headbands are so stretched
    that they do not fit snugly against the head
  • Disassemble earmuffs to clean
  • Use a soft brush to remove oil and dirt that can
    harden cushions
  • Wash earplugs and cushions with mild soap and
    water and place them on a clean surface to dry

29
The Noise Reduction Rating
  • The Noise Reduction Rating (NRR) is a rating
    given to hearing protection devices.
  • The NRR is used to estimate how well the device
    reduces noise, the higher the number the greater
    the noise reduction.

30
The Noise Reduction Rating
  • The formula to determine real life NRR
    according to OSHA
  • Lmeasured (NRR - 7 dB) LHPD
  • For example, your ear plugs have an NRR of 25
    and you are exposed to 95 dB, so
  • 95 (25 - 7) 77 dB
  • So if you wear hearing protection as directed,
    100 of the time during noisy work, your
    exposure will decrease from 95 dB to 77 dB.

31
Using Ear Plugs
  • Step 1
  • Squeeze the plug along its length and roll it
    between your thumb and forefinger to compact it
    down for insertion into the ear canal.

32
  • Step 2
  • Keeping the ear plug compressed and rolled, reach
    over and behind your head with your opposite hand
    and gently pull your ear slightly out and back to
    straighten out the ear canal.

33
  • Step 3
  • Insert the plug into the ear canal.  You may have
    to keep a finger on the plug for a few seconds to
    let it expand to the size of your ear canal.  Do
    not insert the plug so deeply that you cannot
    pinch a bit of the plug for removal practice
    the insertion a few times in front of a mirror to
    get familiar with proper insertion depth.

34
  • Properly inserted earplugs will be easily visible
    from the sides, but only a very small portion of
    the plug will project from the ear.

35
  • Very little (if any) of the earplug should be
    visible from a straight-on view. 

36
Choosing Hearing Protection
  • Choosing a type of hearing protection is a
    personal one and depends on factors including
  • level of noise
  • comfort
  • the suitability of the protection for the work
    environment
  • At UWSP, you can contact your supervisor for a
    selection of hearing protectors for you to use
    free of charge.

37
Common Excusesfor not wearing hearing protection
  • I cant hear other workers.
  • At high noise levels, hearing becomes overloaded.
    Reducing overall sound levels allows the ear to
    operate more effectively in much the same way
    sunglasses provide improved vision in bright
    conditions.

38
Common Excusesfor not wearing hearing protection
  • My machine sounds different.
  • This is true, but workers will become accustomed
    to the new sound and will be able to monitor the
    sound of their machines as well at the end of the
    day as at the start of the shift.

39
Common Excusesfor not wearing hearing protection
  • Im used to the noise.
  • Exposure to noise does not toughen ears. Ears
    do not become used to noise, they become deaf.

40
Common Excusesfor not wearing hearing protection
  • Protectors are uncomfortable.
  • Like new shoes, new hearing protectors need a
    period of adjustment. If discomfort persists,
    the device should be exchanged for a different
    size, fit or type which will be more
    comfortable.

41
Common Excusesfor not wearing hearing protection
  • Ive already lost some of my hearing, why should
    I wear hearing protection now?
  • Just because youve lost some of your hearing
    doesn't mean youre protected for losing more or
    all of it. Although hearing protection devices
    cannot restore a noise-induced hearing loss, they
    should prevent additional losses from occurring.

42
Simple ways to reduce yourrisk of NIHL everywhere
  • Be aware of and avoid harmful noise.
  • Use hearing protection.
  • Minimize your total daily exposure to noise.
  • Control the volume when you can.
  • Do not wait until you notice hearing loss to
    start protecting yourself from harmful noise.

43
(No Transcript)
Write a Comment
User Comments (0)
About PowerShow.com