Title: Hearing Conservation and Noise Control
1Hearing Conservation
and Noise
Control
Bureau of Workers Comp
PA Training for Health
Safety (PATHS)
29 CFR 1910.95
2Why??????
Huh? What?
- Its the LAW
- Quality of Life
- Gradual/Painless
3Anatomy of the Ear
4Types of Hearing Loss
- Conductive Occurs in ear canal, drum, ossicles
- Central Damage to auditory nerve
- Sensorineural Nerve damage in cochlea
-
5Health Effects Other Than
Hearing Loss
6Degree of Risk
- Frequency How often workers exposed
- Intensity How loud
- Duration How long
- Individual Variability Persons resistance
7How Loud is Loud?
- Jet engine 140 db
- Threshold of Pain 125 db
- Pneumatic hammer 110 db
- Compressed Air 105 db
- Punch Press 95 db
- Lawn Mower 90 db
- Conversation 65 db
8Hearing Protective EquipmentAdvantages/Disadvanta
ges
- Cotton Balls Virtually no protection
- Canal Blockers/Ear Pods Only cover opening of
ear canal -
9Hearing Protective EquipmentAdvantages/Disadvanta
ges
- Ear Muffs Good overall protection
- Ear Plugs Can be difficult to insert annoying
to wear
10How to Insert Earplugs
- Roll the earplug into a tight cylinder
- 2. Lift the top of your ear to open the canal
- 3. Insert earplug into the open canal
- 4. Hold earplug in place until the foam expands
- 5. Repeat Steps 1 4 to insert into other
ear
11Safety Factor Noise
Reduction Rating
- OSHA protocol
- For A scale measurements, NRR minus 7
- Example
- Noise exposure 92 dBA
- Manufacturers NRR 15
- 15 7 8 (effective noise exposure
reduction) - 92 8 84 dBA
12NRR Determinationmore from OSHA
- If using dB(A) scale Noise level minus NRR
minus 7 divided by 2 Noise level at ear
ex. Noise level 98 dBA
NRR 25 dBA 98 - 25-7/29 98-989dB.
- If using dB(C) scale Noise level minus NRR
divided by two Noise level at ear
ex. Noise level 98 dBA NRR 25 dBA 98
25/212.5 98-12.585.5 dB.
13Exposure Limits Time
Weighted Average (TWA)
- Time Weighted Average Sound Level
- That sound level, which if constant over an 8
hour exposure, would result in the same dose as
is measured. - To determine TWA if working in different areas
with different noise level readings over 8 hour
work shift - ? Use 1910.95, Appendix A, Table G-16A
- ? Table A-1
14OSHAs Permissible Noise Exposure
- 102 dB 1.5 hours
- 105 dB 1.0 hours
- 110 dB 30 minutes
- 115 dB 15 minutes
- 90 dB 8.0 hours
- 92 dB 6.0 hours
- 95 dB 4.0 hours
- 97 dB 3.0 hours
- 100 dB 2.0 hours
-
-
-
-
At or above controls Engineering,
Administrative, PPE
15Exposure Limits
- If exposure to 8 hour Time Weighted Average
(TWA) - ? ACGIH 85 dBA
(action level) - ? NIOSH 85 dBA
(action level) - ? OSHA ?84 dBA
nothing required - 85 89 dBA
- - monitoring
- - testing
- - protection
- - training
- - recordkeeping
- 90 dBA (Permissible Noise Exposure Limit)
16Noise Monitoring
- Required by the OSHA standard to identify all
noise at or above 85 dBA - Monitoring must be performed whenever there is an
increase in production or equipment is added that
could increase the noise level
17Audiograms
Audiograms are required every year to identify if
there has been a loss of hearing. The solid
line shows a normal result with no hearing loss.
The dotted line represents a typical noise
induced hearing loss (NIHL).
18Training Requirements
- Annual Training
- Hearing Conservation Elements
- Hearing Protectors
Hearing Conservation Program
19Recordkeeping
- Monitoring records
- (Keep for 2 years)
- Audiometric testing records
- (Keep for period of employment)
20Noise Control
- Engineering (e.g. sound barriers)
- Administrative (e.g. worker rotation)
- Personal Protective Equipment (e.g. ear plugs,
ear muffs)
21What is your Company doing to Control Exposure
- ? Monitoring?
- ? Engineering?
- ? Administrative?
- ? PPE?
- If youre not sure you should check with your
Supervisor!
22Questions?