Optaining Electricity For Home

1
Obtaining Electricity For Home
2

• Electricity for home usage is something that
  everyone has to consider when moving into a new
  home or building one. Rates for residential
  consumers are usually higher than those for
  businesses because a residential house will
  typically use much less power than a commercial
  user will consume.
• If a consumer is in a state where the market is
  not regulated, the PUC will have a complete list
  of the providers that serve that particular
  address. Dwelling in a district where the market
  is not deregulated does not mean that they cannot
  contact the PUC to discover which utility company
  is designated to supply the electricity for home
  use in their particular area. The utilities
  commissions are named differently from one state
  to another, so the customer may have to find out
  what their particular state designation is in
  order to contact them. If the market is regulated
  there will not be the same options that will be
  available in a deregulated area. There will only
  be choices among various providers in a market
  that is not regulated. This makes it possible to
  compare the prices among the available power
  providers in an effort to secure the cheapest
  rates.
• If one is inquiring about electricity for home
  usage because the customer is building a new
  residence, there are many things that they must
  do before the power company can arrange for
  energy to be provided to the house. While this
  varies from state to state, it is of the highest
  probability that the home owner will be
  responsible to pay for someone to run the lines
  from the closest pole to the house.

3

• There are also a plethora of zoning permits,
  inspections and other types of formalities that
  must be taken care of before the home owner can
  arrange to have electricity for home usage
  provided. A meter will be placed to record
  consumption rates per billing cycle. The usage is
  relayed to the utility. The home owner is billed
  according to the amount of usage that the
  residence consumes over the billing cycle.
• Once all of the necessary inspections have been
  performed and the proper permits and other
  paperwork necessary has been acquired, an
  engineer will then decide whether or not the
  dwelling is adequately prepared to accept
  electricity for home usage.
• The typical consumption for a residential
  consumer is at the voltages of between one
  hundred and two hundred twenty volts. This allows
  the home to be able to power both the smaller and
  larger items such as the furnace, air
  conditioner, refrigerator, freezer, washer, dryer
  and dishwasher, just to name a few. However, some
  residential consumers need a little higher
  voltage for garages and workshops. If the
  consumers needs are higher than 220 volts, then
  they need to discuss this with the power
  provider.
• The power company will also be able to give the
  customer lots of energy conservation tips and
  safety hints that will keep them safe and help
  save them money as well. Safety ideas such as how
  to work safely around overhead power lines and
  what to do in the event that they encounter a
  downed power line can save the customers life
  and the lives of their loved ones as well.