Samsung PC Studio Manual

1
Samsung PC Studio Manual

• PC Connectivity Via USB

shamsad_at_grameenphone.com
2
For connection via USB, the USB driver for the
Phone should be installed on the PC in advance.
3
Insert Samsung PC Studio (PC Studio is the
updated version of EasyStudio) into CD Rom
Press Internet Access
4
Press Next button after accepting the terms in
the license agreement
Press Next
5
Choose a location to be saved
Then Press Next
6
Press Install
Then Press Install
7
Wait until the Samsung PC Studio Internet Access
is installing
8
Press Finish button
Press Finish button
9
After installing Samsung PC Studio open Internet
Accessgtthen go to set up
Press on Setup button
10
The below screen will be appeared. Select
Country name and Network provider name just as
given belowgtAPN Name will be gpinternetgtConnection
name will be Grameenphone or GPgtPhone number
will be991gtUser name and password must be
blankgtthen click on save button
Press on Save Button
11
Then a new icon named GP will appear as shown
below
Close the window by pressing here
12
Then the below screen will appear again. Now
press connect
Press Connect button to get the internet
connection
13
After a short while, the successful connection
message will be displayed. Now you can use the
Internet, using such applications as Internet
Explorer or Fire fox.
14
PC Studio Checklist

• For connection via USB, the USB driver for the
  Phone should be installed on the PC in advance.
• There are at least five different versions of PC
  Studio. Make sure you have the correct version
  for your phone model. You can download it from
  samsungmobile.com
• Make sure your USB or Serial cable is compatible
  with your phone model. You can always check for
  the correct data cable by looking at the model
  number on samsungmobile.com in your phone's
  accessories section.
• For PC Studio 1 and PC Studio II 1, no drivers
  are necessary as the original data cables of the
  phones using versions 1 and II-1 are serial
  cables which don't require any drivers. For all
  other PC Studio versions, you will need to
  install the USB driver that comes with the
  software if you are using a USB cable as your
  connection.
• If you are using a Bluetooth dongle or IrDa port
  as your connection, the necessary driver(s)
  should be provided with their data kit and should
  be correctly installed and set up prior to the
  installation of PC Studio.

15
(No Transcript)