Engineering Consultancy

1
WELCOME

• Seward Wyon
• The Old TanneryKelston, BathBA1 9AN
• Tel [phone]
• Fax [phone]
• Email info_at_sewardwyon.co.uk

2

• A guide to Install and maintain a Machine
• Any instrument made to reduce the work effort of
  a human being is a Machine.
• Like how for the better existence of a building,
  laying a strong foundation is the most important
  part, similarly for proper functioning and
  performance of a machine, its installation and
  further maintenance is very important .
• Installation of a Machine
• The Support Structure (Foundation)-The base must
  be in a position to handle the load of the heavy
  machine that can be made of iron without any
  problems that is abnormal shaking, too close to
  any other machine allowing clashing, creating
  strong vibrations that can create risk.
• J-Bolts Strong bolts fix the machine to the
  foundation very firmly and strongly. When
  concrete is poured to the surface, these bolts
  are fixed so that they grip on to the base as
  strongly as a one could imagine.

3

• Remoteness Energy created by one machine should
  at any cost not disrupt the functioning of the
  other machine. Thus sufficient gap should be
  provided between machines and the foundation of
  the machine should be such that it is able to
  absorb the vibration created by itself.
• Alignment- To avoid any work stoppage or
  accidents due to improper alignment, at the
  initial stages itself a machine should be check
  for proper alignment. Experts in this area would
  play a vital role in checking if this is done
  well. There is equipment made for the purpose of
  proper alignment which an alignment crew would
  use.
• Environment- EvenEiffel tower increases its
  height by 15 inches during summer. Machines are
  affected to a large extent due to sunlight, a
  minor earth quake far away disrupting the
  alignment of the machine, draught conditions,
  strong vibrations etc.

4
(No Transcript)
5

• Maintaining a Machine
• A two wheeler would not function well if not
  properly serviced a Machine is not exception to
  repair and maintenance.
• Types of maintenance
• Before actual repair- Prevention is always better
  than cure. A time line should be decided by the
  management of the company to ensure that proper
  checks are made to make sure the machines are in
  good condition.
• Necessary oiling, cleaning, checking for any
  leakage, checking the alignment of the machine,
  checking the vibration absorption capacity of the
  machine, checking for the nuts bolts to be
  properly fixed etc. should be done at least every
  6-9 months.

6

• After the failure A breakdown, stoppage of work
  would invite unplanned repairs and checks. This
  are generally more cost and time consuming for
  the company as first the defect has to be
  identified and then the repair work has to start.
• In cases where the size of the equipment is very
  huge or is very critical, softwareare maintained
  to ensure the timely maintenance of the machine.
•  
• Machines where/are created to help reduce humans
  effort. It should be made sure that they do only
  that is in no way creating any threat to the
  society, whether its due to release of toxins in
  the air, due to improper maintenance or accidents
  due to negligence.

7
THANK YOU

• Seward Wyon
• The Old TanneryKelston, BathBA1 9AN
• Tel [phone]
• Fax [phone]
• Email info_at_sewardwyon.co.uk