AGRIMAR UK PLC

1
AGRIMAR (UK) PLC
TRACE ELEMENT RANGE
AGRIMAR (UK) PLC CANAL COURT, 152 HIGH
STREET BRENTFORD, MIDDLESEX TW8 8JA UNITED
KINGDOM TEL [phone] FAX 00 44
(0)20 8560 4466 E-MAIL info_at_agrimarukplc.co.uk WE
B SITE www.agrimarukplc.co.uk
2
PRODUCT RANGE
PRODUCT SPECIFICATION USES AGRI-FER Iron
Chelate For soil application Fe EDDHA
6 DETA-FER Iron Chelate For foliar
application Fe EDTA 13.2 MANGANESE Manganese
Chelate For soil and foliar application Mn EDTA
13 ZINC Zinc Chelate For soil and foliar
application Zn EDTA 14 COPPER Copper
Chelate For soil and foliar application Cu EDTA
14 AGRI-MIX No. 1 High Iron Micronutrient For
foliar application Mix for general
deficiencies AGRI-MIX No. 2 Micronutrient Mix
for For foliar application general
deficiencies NITRO-BOOST High Nitrogen Mix
for For foliar application actively growing
plants AGRI-FOL 12-6-6 NPK and Micro- For foliar
feeding nutrients, all purpose feed
3
(No Transcript)
4
AGRI-FER 6
Iron Chelate (Fe EDDHA) in micro-granular form.
Contains 6 Fe. For the correction of iron
deficiency in crops and ornamentals growing in
alkaline and calcareous soils. Recommended for
soil application.
DIRECTIONS FOR USE
Dissolve in a convenient amount of water, then
apply as a coarse low pressure spray or sprinkle
on as a dry powder, either by itself or mixed
with an extender such as dry sand. Applications
should always be incorporated into the top few
centimetres of soil as soon as possible after
application and certainly within the following
1-2 hours. This can be done by harrowing or
hoeing in or by irrigation. Farm Crops Apply to
the soil before cultivation prior to sowing or
planting or between the rows, alternatively apply
through overhead or ground level irrigation
systems.
Deep-Rooting Trees Shrubs Apply to the soil in
a wide circular bank under the limit of the full
branch spread. For best results, nutrients
should be in the root zone before seasonal growth
begins. For deep rooting trees in regions which
have moderate to high rainfall, apply in mid to
late winter to allow the rains to wash in the
chelate. Alternatively, use a pressure injector
to get the solution down to the root feeding
zone. Injections should be no more than one
metre apart, in a wide band directly under the
limit of the full branch spread. This should be
done at the beginning of the season, just before
re-growth commences.
If there are weeds or grass growing under the
trees, increase the recommended application rate
by half as much again. Shallow Rooting
Crops Apply to the soil along the rows,
beginning at the first signs of seasonal
re-growth. In moderate to high rainfall areas,
do not wash in. In arid regions, wash in
sparingly. If the soil is densely-compacted, the
surface should be broken up by hoeing or
harrowing before applying.
1
5
AGRI-FER 6
RATES OF APPLICATION
The following rates indicate upper and lower
limits. Actual amounts used will depend upon the
size of the bush or tree and on the degree of
deficiency Apples, Apricots, Peaches, Pears,
Plums Apply 25-125 g per tree, depending on
size. Citrus For young trees, apply at 500-750
g per 100m2. For mature trees, apply at 200-500g
per tree. As an annual maintenance programme,
apply at 50-150 g per tree. Grapes Apply 10-50
g per vine or 750-1500 g per 100 metres of row,
in a band or a side dressing. Cotton, Peas and
Beans, Cereals, Vegetables, Peppers, Root Crops,
Potatoes, Tomatoes, Melons and Squashes Apply
2.5-5.5 kg/ha just before sowing or planting or
when iron deficiency symptoms begin to
appear. Raspberries, Strawberries, etc Apply
750-1500 g per 100 metres of row, in a band or a
side dressing. Rhododendrons, Azaleas, Roses,
Forsythias and Other Shrubs Apply 20-50 g per
plant. Chrysanthemums, Geraniums and Similar
Annuals and Perennials Apply 10-60 g per
10m2. Rates should be judged according to the
age of the plant, variety, soil type and other
local conditions. IRRIGATION When used through
an irrigation system the appropriate application
rate should be selected from the previous
selection. This should then be applied via the
irrigation system at a rate not greater than 1 kg
(dry weight) per 10,000 Litres of
water. PRECAUTIONS 1. Keep well sealed and store
in original sealed container. 2. Wash hands
before meals and after work. 3. Store away from
children, pets, livestock and food
stuffs. 4. Store dry, away from strong
light. 5. Do not apply to crops suffering stress
such as extreme temperatures, strong winds, etc.
2
6
AGRI-FER 6
TECHNICAL DATA IRON CHELATE (Fe EDDHA) IN
MICRO-GRANULAR FORM. CONTAINS 6 Fe
Trade Name AGRI-FER Active Ingredient Fe min
6 Chemical Name of Active Ingredient Ferric
ethylenediamine bis (2 hydroxyphenyle
acetate) Chelate Agents EDDHA Physical
Form Soluble powder, red/brown in
colour. Packing 1 kg laminated bags 10 x 1
kgs per carton box. 20 kg boxes. Storage Store
in a cool dry place in original closed container.

• HEALTH HAZARDS
• Effect on eyes product could cause slight
  discomfort if allowed to come into contact with
  delicate eye surfaces, but no permanent damage is
  likely. It is always advisable to wash eyes if
  contact with chemicals is suspected.
• Ingestion the normally toxic metal ions are
  held in a complex form (chelated) which reduces
  their toxicity to a very low level. Risk of
  injury by accidental ingestion is minimal. In
  the event of accidental ingestion, the product is
  not accumulated and is readily eliminated from
  the body.
• Effect on skin and mucous membranes no evidence
  of irritation or sensitisation.
• Inhalation solid products can be dusty and a
  dust mask should be worn when handling them in
  bulk, since all dusts are to some extent irritant
  if inhaled.

FIRST AID If accidentally ingested rest
patient, give copious amounts of water to drink
and seek medical advice. Skin contamination
wash off with copious amounts of water.
3
7
DETA-FER
Iron Chelate (Fe EDTA) in soluble powder form.
Contains 13.2 Fe. For the correction of iron
deficiency in crops. Recommended for soil
application.
DIRECTIONS FOR USE FOLIAR
APPLICATION Hydroponics
Preparation of Solution Stir 1 part powder into
6 parts water, dilute to the required
concentration. Timing to obtain maximum
benefit, foliar applications should be started as
early as possible in the season, as soon as there
is sufficient leaf area to absorb the
spray. Wetting Agent when this product is
applied as a foliar spray alone (i.e. not mixed
with other pesticides) it is recommended that a
non-ionic wetting agent such as AGRIWET is added
to the spray solution. RATES OF APPLICATION The
following rates indicate upper and lower limits.
Actual amounts will depend upon the size of plant
and on the degree of deficiency.
Field Crops General recommendation Apply 1-2
kgs/ha in 300-1000 Litres of water/ha. For
severe deficiencies repeat after two
weeks. Fruit Crops Apply 1-2kg/ha in a repeat
high volume spray programme, e.g. 4 applications
of 0.5 kgs in 1000 Litres water/ha. DO NOT
EXCEED A SOLUTION OF 0-1 (1gram per
Litre). Glasshouse Crops (Foliar
Application) Tomato, Cucumber, Squash etc., Cut
Flowers, Carnations, Pot Plants, Potted Flowers
Apply at a rate of 50g/1000 Litres
water. Glasshouse Crops (Compost
Application) If iron deficiency in plants
growing in growbags or soil-less composts,
Deta-Fer may be added to the irrigation water or
liquid feed at a rate of 100 g per 1000 Litres
water.
If iron deficiency develops first check the pH of
the nutrient solution and if necessary adjust to
pH 6.0. Then add Deta-Fer at the rate of 80g per
1000 Litres of nutrient solution. If symptoms
persist, repeat the treatment 10-14 days
later. A solution of 10 ppm can be made by
adding 75g of Deta-Fer to 1000 Litres of nutrient
solution.

• PRECAUTIONS
• Keep well sealed and store in original sealed
  container.
• Wash hands before meals and after work.
• Store away from children, pets, livestock and
  food stuffs.
• Store dry, away from strong light.
• Do not apply to crops suffering stress, such as
  extreme temperatures, strong winds, etc.

4
8
AGRIMAR MANGANESE 13
Manganese Chelate (EDTA) in soluble granule form.
Contains 13 Mn. For the correction of manganese
deficiency in all crops. Recommended for soil and
foliar application.
DIRECTIONS FOR USE
Preparation of Solution Stir 1 part granules
into 6 parts water, dilute to the required
concentration. FOLIAR APPLICATION Timing to
obtain maximum benefit, foliar applications
should be started as early as possible in the
season, as soon as there is sufficient leaf area
to absorb the spray. Wetting Agent when this
product is applied as a foliar spray alone (i.e.
not mixed with other pesticides) it is
recommended that a non-ionic wetting agent such
as AGRIWET is added to the spray solution. SOIL
APPLICATION Apply as a course low pressure spray
direct to the soil.
Application should always be incorporated into
the top few centimetres of soil as soon as
possible after application and certainly within
the following 1-2 hours. This can be done by
harrowing or hoeing in, or by irrigation. Farm
Crops Apply to the soil before the cultivation
prior to sowing or planting or between the rows
or through overhead or ground level irrigation
systems. Deep-Rooting Trees and Shrubs Apply to
the soil in a wide circular band under the limit
of the full branch spread. For best results,
nutrients should be in the root zone before
seasonal growth begins. For deep rooting trees
in regions which have moderate to high rainfall,
apply in mid to late winter to allow the rains to
wash in the chelate.
Alternatively, use a pressure injector to get the
solution down to the root feeding zone.
Injections should be no more than one metre
apart, in a wide band directly under the limit of
the full branch spread. This should be done at
the beginning of the season just before re-growth
commences. If there are weeds or grass growing
under the trees, increase the recommended
application rate by half as much
again. Shallow-Rooting Crops Apply to the soil
along the rows, beginning at the first signs of
seasonal re-growth. In moderate to high
rainfall areas, do not wash in. In arid regions,
wash in sparingly. If the soil is
densely-compacted, the surface should be broken
up by hoeing or harrowing before applying.
5
9
AGRIMAR MANGANESE 13
RATES OF APPLICATION
The following rates indicate upper and lower
limits. Actual amounts used will depend upon the
type of plant and on the degree of
deficiency FOLIAR APPLICATION Field Crops and
Greenhouses, General Recommendation Apply 1-2
kgs/ha in 200-400 Litres water/ha. For severe
deficiencies repeat after two weeks. Fruit
Crops Apply the above quantities in a repeat
high volume spray programme. DO NOT EXCEED A
SOLUTION OF 0-1 (1 gram per Litre) WHEN APPLYING
AS A FOLIAR SPRAY TO FRUIT CROPS. SOIL
APPLICATION All Crops 3-4 kgs/ha in 200-400
Litres of water/ha. Rates should be judged
according to the age of the plant, variety, soil
type and other local conditions. IRRIGATION When
used through an irrigation system the appropriate
application rate should be selected from the
previous selection. This should then be applied
via the irrigation system at a rate not greater
than 1 kg (dry weight) per 10,000 Litres of
water. PRECAUTIONS 1. Keep well sealed and store
in original sealed container. 2. Wash hands
before meals and after work. 3. Store away from
children, pets, livestock and food
stuffs. 4. Store dry, away from strong
light. 5. Do not apply to crops suffering stress
such as extreme temperatures, strong winds, etc.
6
10
AGRIMAR MANGANESE 13
TECHNICAL DATA MANGANESE CHELATE (EDTA) IN
SOLUBLE GRANULE FORM. CONTAINS 13 Mn.
Trade Name AGRIMAR MANGANESE 13 Active
Ingredient Mn EDTA 13 Chemical Name of Active
Ingredient Disodium Manganous ethylenediamine
tetra acetate Molecular Weight 389 Physical
Form Soluble granules, white in
colour. Solubility in Water 300g/l (at
20ºC) Density 0.70-0.85 Moisture Not greater
than 5 Packing 1 kg laminated bags 10 x 1
kgs per carton box. 25 kgs carton
boxes. Storage Store in a cool dry place in
original closed container.

• HEALTH HAZARDS
• Effect on eyes product could cause slight
  discomfort if allowed to come into contact with
  delicate eye surfaces, but no permanent damage is
  likely. It is always advisable to wash eyes if
  contact with chemicals is suspected.
• Ingestion the normally toxic metal ions are
  held in a complex form (chelated) which reduces
  their toxicity to a very low level. Risk of
  injury by accidental ingestion is minimal. In
  the event of accidental ingestion, the product is
  not accumulated and is readily eliminated from
  the body.
• Effect on skin and mucous membranes no evidence
  of irritation or sensitisation.
• Inhalation solid products can be dusty and a
  dust mask should be worn when handling them in
  bulk, since all dusts are to some extent irritant
  if inhaled.

FIRST AID If accidentally ingested rest
patient, give copious amounts of water to drink
and seek medical advice. Skin contamination
wash off with copious amounts of water.
7
11
AGRIMAR ZINC 14
Zinc Chelate (EDTA) in soluble granule form.
Contains 14 Zn. For the correction of zinc
deficiency in all crops. Recommended for soil and
foliar application.
DIRECTIONS FOR USE
Preparation of Solution Stir 1 part granules
into 6 parts water, dilute to the required
concentration. FOLIAR APPLICATION Timing to
obtain maximum benefit, foliar applications
should be started as early as possible in the
season, as soon as there is sufficient leaf area
to absorb the spray. Wetting Agent when this
product is applied as a foliar spray alone (i.e.
not mixed with other pesticides) it is
recommended that a non-ionic wetting agent such
as AGRIWET is added to the spray solution. SOIL
APPLICATION Apply as a course low pressure spray
direct to the soil.
Application should always be incorporated into
the top few centimetres of soil as soon as
possible after application and certainly within
the following 1-2 hours. This can be done by
harrowing or hoeing in or by irrigation. Farm
Crops Apply to the soil before the cultivation
prior to sowing or planting, or between the rows
or through overhead or ground level irrigation
systems. Deep-Rooting Trees and Shrubs Apply to
the soil in a wide circular band under the limit
of the full branch spread. For best results,
nutrients should be in the root zone before
seasonal growth begins. For deep rooting trees
in regions which have moderate to high rainfall,
apply in mid to late winter to allow the rains to
wash in the chelate.
Alternatively, use a pressure injector to get the
solution down to the root feeding zone.
Injections should be no more than one metre
apart, in a wide band directly under the limit of
the full branch spread. This should be done at
the beginning of the season just before re-growth
commences. If there are weeds or grass growing
under the trees, increase the recommended
application rate by half as much
again. Shallow-Rooting Crops Apply to the soil
along the rows, beginning at the first signs of
seasonal re-growth. In moderate to high rainfall
areas, do not wash in. In arid regions, wash in
sparingly. If the soil is densely-compacted, the
surface should be broken up by hoeing or
harrowing before applying.
8
12
AGRIMAR ZINC 14
RATES OF APPLICATION
The following rates indicate upper and lower
limits. Actual amounts used will depend upon the
type of plant and on the degree of
deficiency FOLIAR APPLICATION Field Crops and
Greenhouses, General Recommendation Apply 1-2
kgs/ha in 200-400 Litres water/ha. For severe
deficiencies repeat after two weeks. Vegetables
and Nurseries Apply 0.5-2 kgs/ha in 200-400
Litres water/ha. Citrus, Apples, Pears, Stone
Fruits Apply 1-2 kgs/ha in a repeat high volume
spray programme, e.g. 4 applications of 0.5 kgs
in 500 Litres water/ha. DO NOT EXCEED A SOLUTION
OF 0-1 (1 gram per Litre). SOIL
APPLICATION Field Crops, Vegetables,
Nurseries Apply 1-5 kg/ha. Citrus, Apples,
Pears, Stone Fruits Apply 5-10 kg/ha. Grape
Vineyards Apply 8-25 kg/ha. Ornamental
Trees Apply 7-30 g/tree. Shrubs and
Bushes Apply 0.1-0.7 kg/100 bushes. Strawberries
Apply 0.1-0.3 kg/100 plants. Rates should be
judged according to the age of the plant,
variety, soil type and other local
conditions. IRRIGATION When used through an
irrigation system the appropriate application
rate should be selected from the previous
selection. This should then be applied via the
irrigation system at a rate not greater than 1 kg
(dry weight) per 10,000 Litres of
water. PRECAUTIONS 1. Keep well sealed and store
in original sealed container. 2. Wash hands
before meals and after work. 3. Store away from
children, pets, livestock and food
stuffs. 4. Store dry, away from strong
light. 5. Do not apply to crops suffering stress
such as extreme temperatures, strong winds, etc.
9
13
AGRIMAR ZINC 14
TECHNICAL DATA ZINC CHELATE (EDTA) IN SOLUBLE
GRANULE FORM. CONTAINS 14 Zn.
Trade Name AGRIMAR ZINC 14 Active
Ingredient Zn EDTA 14 Chemical Name of Active
Ingredient Zinc disodium ethylenediamine tetra
acetate. Molecular Weight 399 Physical
Form Soluble granules, white in
colour. Solubility in Water 300g/l (at
20ºC) Density 0.70-0.85 Moisture Not greater
than 5 Packing 1 kg laminated bags 10 x 1
kgs per carton box. 25 kgs carton
boxes. Storage Store in a cool dry place in
original closed container.

• HEALTH HAZARDS
• Effect on eyes product could cause slight
  discomfort if allowed to come into contact with
  delicate eye surfaces, but no permanent damage is
  likely. It is always advisable to wash eyes if
  contact with chemicals is suspected.
• Ingestion the normally toxic metal ions are
  held in a complex form (chelated) which reduces
  their toxicity to a very low level. Risk of
  injury by accidental ingestion is minimal. In
  the event of accidental ingestion, the product is
  not accumulated and is readily eliminated from
  the body.
• Effect on skin and mucous membranes no evidence
  of irritation or sensitisation.
• Inhalation solid products can be dusty and a
  dust mask should be worn when handling them in
  bulk, since all dusts are to some extent irritant
  if inhaled.

FIRST AID If accidentally ingested rest
patient, give copious amounts of water to drink
and seek medical advice. Skin contamination
wash off with copious amounts of water.
10
14
AGRIMAR COPPER 14
Copper Chelate (EDTA) in soluble powder form.
Contains 14 Cu. For the correction of copper
deficiency in all crops. Recommended for soil and
foliar application.
DIRECTIONS FOR USE
Preparation of Solution Stir 1 part granules
into 6 parts water, dilute to the required
concentration. FOLIAR APPLICATION Timing to
obtain maximum benefit, foliar applications
should be started as early as possible in the
season, as soon as there is sufficient leaf area
to absorb the spray. Wetting Agent when this
product is applied as a foliar spray alone (i.e.
not mixed with other pesticides) it is
recommended that a non-ionic wetting agent such
as AGRIWET is added to the spray solution. SOIL
APPLICATION Apply as a course low pressure spray
direct to the soil.
Application should always be incorporated into
the top few centimetres of soil as soon as
possible after application and certainly within
the following 1-2 hours. This can be done by
harrowing or hoeing in or by irrigation. Farm
Crops Apply to the soil before the cultivation
prior to sowing or planting, or between the rows
or through overhead or ground level irrigation
systems. Deep-Rooting Trees and Shrubs Apply to
the soil in a wide circular band under the limit
of the full branch spread. For best results,
nutrients should be in the root zone before
seasonal growth begins. For deep rooting trees
in regions which have moderate to high rainfall,
apply in mid to late winter to allow the rains to
wash in the chelate.
Alternatively, use a pressure injector to get the
solution down to the root feeding zone.
Injections should be no more than one metre
apart, in a wide band directly under the limit of
the full branch spread. This should be done at
the beginning of the season just before re-growth
commences. If there are weeds or grass growing
under the trees, increase the recommended
application rate by half as much
again. Shallow-Rooting Crops Apply to the soil
along the rows, beginning at the first signs of
seasonal re-growth. In moderate to high rainfall
areas, do not wash in. In arid regions, wash in
sparingly. If the soil is densely-compacted, the
surface should be broken up by hoeing or
harrowing before applying.
11
15
AGRIMAR COPPER 14
RATES OF APPLICATION
The following rates indicate upper and lower
limits. Actual amounts used will depend upon the
type of plant and on the degree of
deficiency FOLIAR APPLICATION Field Crops,
General Recommendation Apply 0.25-0.5 kgs/ha in
200-400 Litres water/ha. For severe
deficiencies repeat after two weeks. Vegetables
and Nurseries Apply 0.2-0.5 kgs/ha in 200-400
Litres water/ha. Cereals Apply 0.3-0.5 kgs/ha
in 200-400 Litres water/ha. Fruit Trees Apply
0.9-0.7 kgs/ha in a repeat high volume spray
programme, e.g. 4 applications of 125 gm/ha in
300-500 Litres water/ha. DO NOT EXCEED A
SOLUTION OF 0-1 (1 gram per Litre) WHEN APPLYING
AS A FOLIAR SPRAY TO FRUIT CROPS. SOIL
APPLICATION Field Crops, Vegetables,
Nurseries Apply 0.8-2.5 kg/ha. Fruit
Trees Apply 0.5-5 kg/ha. Ornamental Trees Apply
7-30 g/tree. Shrubs and Bushes Apply 0.1-0.7
kg/100 bushes. Strawberries Apply 0.1-0.7 kg/100
plants. Rates should be judged according to the
age of the plant, variety, soil type and other
local conditions. IRRIGATION When used through
an irrigation system the appropriate application
rate should be selected from the previous
selection. This should then be applied via the
irrigation system at a rate not greater than 1 kg
(dry weight) per 10,000 Litres of
water. PRECAUTIONS 1. Keep well sealed and store
in original sealed container. 2. Wash hands
before meals and after work. 3. Store away from
children, pets, livestock and food
stuffs. 4. Store dry, away from strong
light. 5. Do not apply to crops suffering stress
such as extreme temperatures, strong winds, etc.
12
16
AGRIMAR COPPER 14
TECHNICAL DATA COPPER CHELATE (EDTA) IN SOLUBLE
POWDER FORM. CONTAINS 14 Cu.
Trade Name AGRIMAR COPPER 14 Active
Ingredient Cu EDTA 14 Chemical Name of Active
Ingredient Copper disodium ethylenediamine tetra
acetate. Molecular Weight 397 Physical
Form Soluble granules, blue in
colour. Solubility in Water 357g/l (at
20ºC) Density 0.70 Moisture Not greater than
5 Packing 1 kg laminated bags 10 x 1 kgs per
carton box. 25 kgs carton boxes. Storage Store
in a cool dry place in original closed container.

• HEALTH HAZARDS
• Effect on eyes product could cause slight
  discomfort if allowed to come into contact with
  delicate eye surfaces, but no permanent damage is
  likely. It is always advisable to wash eyes if
  contact with chemicals is suspected.
• Ingestion the normally toxic metal ions are
  held in a complex form (chelated) which reduces
  their toxicity to a very low level. Risk of
  injury by accidental ingestion is minimal. In
  the event of accidental ingestion, the product is
  not accumulated and is readily eliminated from
  the body.
• Effect on skin and mucous membranes no evidence
  of irritation or sensitisation.
• Inhalation solid products can be dusty and a
  dust mask should be worn when handling them in
  bulk, since all dusts are to some extent irritant
  if inhaled.

FIRST AID If accidentally ingested rest
patient, give copious amounts of water to drink
and seek medical advice. Skin contamination
wash off with copious amounts of water.
13
17
AGRI-MIX NO. 1
A micronutrient mix for correction of nutrient
deficiencies in all plants. Formulated as soluble
powder. Recommended for foliar application and
soil application in acid to neutral soils.
DIRECTIONS FOR USE
FOLIAR APPLICATION Foliar application is
recommended for fast correction of deficiencies.
Phytotoxic symptoms, such as scorching, may
occasionally occur on very sensitive crops after
foliar application. If this occurs change to
root application. Timing to obtain maximum
benefit, foliar applications should be started as
early as possible in the season, as soon as there
is sufficient leaf area to absorb the spray. In
case of severe deficiencies, application may have
to be repeated at 7-14 day intervals.
Wetting Agent when this product is applied as a
foliar spray alone (i.e. not mixed with other
pesticides) it is recommended that a non-ionic
wetting agent such as AGRIWET is added to the
spray solution. SOIL APPLICATION Dissolve in a
convenient amount of water, then apply as a
coarse low pressure spray or apply mixed with
liquid fertiliser. Apply to the soil close to
plants and tree trunks. Work well into the soil
after application, water carefully after each
application to enhance nutrient uptake.
COMPATIBILITY The product can be mixed with
most other fertilizers and agrochemicals without
causing precipitation or scorch problems. In
liquid fertilizers the mixture should be used as
soon as possible.
14
18
AGRI-MIX NO. 1
COMPOSITION
Element Content Content Form Boron B 0.40
4.0 g/kg Mineral Salt Copper Cu 0.15 1.5
g/kg EDTA Iron Fe 5.00 50.0 g/kg EDTA Manganese
Mn 2.00 20.0 g/kg EDTA Molybdenum Mo 0.10 1.0
g/kg Mineral Salt Zinc Zn 0.20 2.0
g/kg EDTA AGRI-MIX No. 1 is a micronutrient mix
with a higher than usual level of Iron (Fe) which
has been designed specifically for use under
Middle Eastern conditions. RATES OF
APPLICATION The following rates give general
recommendations. Actual amounts used will depend
on the size of bush or tree and on the degree of
deficiency. Crop Foliar Application Soil
Application Cereals 1-2 kg/ha 4-10
kg/ha Fruit Trees and Shrubs 2-5 kg/ha
4-10 kg/ha Vegetables 1-4 kg/ha 4-8
kg/ha Ornamentals 1-4 kg/ha
2-10 g/plant When applying as foliar spray to
fruit trees it is important to use a repeat high
volume spray programme, e.g. 4 applications of
0.5 kgs in 300-1000 Litres water/ha. DO NOT
EXCEED A SOLUTION OF 0-1 (1 gram per
Litre) Rates should be judged according to the
age of the plant, variety, soil type and other
local conditions. PRECAUTIONS 1. Keep well
sealed and store in original sealed
container. 2. Wash hands before meals and after
work. 3. Store away from children, pets,
livestock and food stuffs. 4. Store dry, away
from strong light. 5. Do not apply to crops
suffering stress such as extreme temperatures,
strong winds, etc.
15
19
AGRI-MIX NO. 2
A micronutrient mix for correction of nutrient
deficiencies in all plants. Formulated as soluble
powder. Recommended for foliar application and
soil application in acid to neutral soils.
DIRECTIONS FOR USE
FOLIAR APPLICATION Foliar application is
recommended for fast correction of deficiencies.
Phytotoxic symptoms, such as scorching, may
occasionally occur on very sensitive crops after
foliar application. If this occurs change to
root application. Timing to obtain maximum
benefit, foliar applications should be started as
early as possible in the season, as soon as there
is sufficient leaf area to absorb the spray. In
case of severe deficiencies, application may have
to be repeated at 7-14 day intervals.
Wetting Agent when this product is applied as a
foliar spray alone (i.e. not mixed with other
pesticides) it is recommended that a non-ionic
wetting agent such as AGRIWET is added to the
spray solution. SOIL APPLICATION Dissolve in a
convenient amount of water, then apply as a
coarse low pressure spray or apply mixed with
liquid fertiliser. Apply to the soil close to
plants and tree trunks. Work well into the soil
after application, water carefully after each
application to enhance nutrient uptake.
COMPATIBILITY The product can be mixed with
most other fertilizers and agrochemicals without
causing precipitation or scorch problems. In
liquid fertilizers the mixture should be used as
soon as possible.
16
20
AGRI-MIX NO. 2
COMPOSITION
Element Content Content Form Boron B 1.5 15.0
g/kg Mineral Salt Iron Fe 3.8 38.0
g/kg EDTA Magnesium Mg 1.6 16.0 g/kg Mineral
Salt Manganese Mn 4.3 43.0 g/kg Mineral
Salt Molybdenum Mo 0.3 3.0 g/kg Mineral
Salt Zinc Zn 0.2 2.0 g/kg EDTA AGRI-MIX No. 2
is a micronutrient mix suitable for routine
applications to maintain the nutrient status and
health of all crops throughout the growing
season. Contains Iron EDTA chelate. RATES OF
APPLICATION The following rates give general
recommendations. Actual amounts used will depend
on the size of bush or tree and on the degree of
deficiency. Crop Foliar Application Soil
Application Cereals 1-2 kg/ha 4-10
kg/ha Fruit Trees and Shrubs 2-5 kg/ha
4-10 kg/ha Vegetables 1-4 kg/ha 4-8
kg/ha Ornamentals 1-4 kg/ha
2-10 g/plant When applying as foliar spray to
fruit trees it is important to use a repeat high
volume spray programme, e.g. 4 applications of
0.5 kgs in 300-1000 Litres water/ha. DO NOT
EXCEED A SOLUTION OF 0-1 (1 gram per
Litre) Rates should be judged according to the
age of the plant, variety, soil type and other
local conditions. PRECAUTIONS 1. Keep well
sealed and store in original sealed
container. 2. Wash hands before meals and after
work. 3. Store away from children, pets,
livestock and food stuffs. 4. Store dry, away
from strong light. 5. Do not apply to crops
suffering stress such as extreme temperatures,
strong winds, etc.
17
21
NITRO-BOOST
NITRO-BOOST is a liquid formulation designed to
give additional nitrogen to crops in a fast
acting foliar form. When used during periods of
rapid growth or as a routine treatment
NITRO-BOOST helps maintain the crop on the path
of optimum yield. Recommended for foliar
application.
DIRECTIONS FOR USE
Conventional Spraying Apply in a minimum of 220
Litres water/ha. CAD/ULV Spraying Volume of
water can be reduced to 55 Litres/ha. COMPATIBILI
TY NITRO-BOOST is compatible with a wide range of
fungicides and insecticides. NITRO-BOOST should
be added to the water first, followed by the
pesticide. RATES OF APPLICATION Crop Rate per
No. of Stage of Crop Hectare Applic. Cereals 5
-10 Ltr 3-6 From beginning of tillering up to
flowering. Vegetables, Melons, Squashes,
5-10 Ltr 1-3 As soon as sufficient foliage is
Tomatoes,Cucumbers, etc. available for
absorption. Sugar Beet 3-9 Ltr 3-6 From
5-6 leaves onwards. Maize 5-10 Ltr 1-3 From
20cm height up to maximum 4 weeks
later. Peas 2-3 Ltr 2-4 After peas are more
than 15cm high. Fruit and Ornamentals 6 Ltr
1-3 Before flowering. (under glass and
outdoors) The lower rate is recommended in the
case of multiple applications to any one crop.
18
22
NITRO-BOOST
COMPOSITION
Nitrogen N 36 w/v Magnesium Mg
2.4 w/v Manganese Mn 1.3 w/v
Copper Cu 0.13 w/v NITRO-BOOST may be
applied through any type of sprayer or through
the irrigation system in intensive crops. For
optimum effectiveness all the spray mixture
should be applied to the plant foliage. NITRO-BOO
ST is independent of weather conditions, but best
results will be obtained if applied early morning
or late evening. Do not apply in bright
sunlight. PRECAUTIONS 1. Keep well sealed and
store in original sealed container. 2. Wash hands
before meals and after work. 3. Store away from
children, pets, livestock and food
stuffs. 4. Store dry, away from strong
light. 5. Do not apply to crops suffering stress
such as extreme temperatures, strong winds,
etc. Packed in 5 litre plastic bottles 4 x 5
Litres per carton.
19
23
AGRI-FOL
Liquid Foliar Fertiliser. Guaranteed analysis
12-6-6. A complete foliar nutrient for
application to all crops. Recommended for foliar
and soil application.
DIRECTIONS FOR USE
AGRI-FOL mixes readily with water. Stir when
mixing. Spray when crop is actively growing.
During hot weather spray at coolest part of the
day, i.e. early morning or late evening. DO NOT
APPLY IN DIRECT SUNLIGHT. COMPATIBILITY AGRI-FOL
is compatible with a wide range of fungicides and
insecticides. AGRI-FOL should be added to the
water first, followed by the pesticide. RATES OF
APPLICATION FOLIAR APPLICATION All
Crops Apply 2.5 Litres/ha in minimum 225 Litres
water/ha. Begin when leaves are large enough to
absorb the nutrients and continue every 14-21
days until crop is mature. SOIL APPLICATION
All Crops Apply 50 Litres/ha in 1120 Litres
water/ha before planting. Work lightly into the
soil. ROW APPLICATION All Crops Apply 5
Litres/ha in 1120 Litres water/ha at least 5cm to
the side and 5cm below the row of seeds.
20
24
AGRI-FOL
COMPOSITION
Water Soluble Organic Nitrogen
(urea) N 12 Available Phosphoric Acid P
6 Water Soluble Potash K 6 Magnesium Mg 0.10
Iron Fe 0.10 Manganese Mn 0.05 Copper Cu 0.
05 Zinc Zn 0.05 Boron B 0.02 Molybdenum Mo 0
.0005 Cobalt Co 0.0005 CAUTION AGRI-FOL is
acidic. Avoid contact with skin, eyes or
clothing. Rinse out equipment after
spraying. PRECAUTIONS 1. Keep well sealed and
store in original sealed container. 2. Wash hands
before meals and after work. 3. Store away from
children, pets, livestock and food
stuffs. 4. Store dry, away from strong
light. 5. Do not apply to crops suffering stress
such as extreme temperatures, strong winds,
etc.
21
25
(No Transcript)