Select Appropriate Magnetic Separator Design

About This Presentation
Title:

Select Appropriate Magnetic Separator Design

Description:

Tools that identifies and remove metal impurities is important in food processing industry and magnetic bars work successfully for this methodology. Choosing the appropriate magnetic separator design requires an understanding of magnetic properties, product aspect and the specific environmental factors in each food processing plant. – PowerPoint PPT presentation

Number of Views:17

less

Transcript and Presenter's Notes

Title: Select Appropriate Magnetic Separator Design


1
Select Appropriate Magnetic Separator Design
Submitted By
Leyuan Separation
2
  • Magnetic separators for sale can be seen in an
    extensive variety of pattern, that includes Bar
    magnetic separator, plate magnetic separator or
    grate magnetic separator etc.
  • Bar magnetic separators are permanent
    non-electric magnetic separator that can be
    used as a part of an extensive variety of uses.
    They are used to remove ferrous contaminants
    exhibit in little, shallow quantities of
    streaming powder, granules, strands and liquids.

3
  • ?Plate magnetic separators are used as a part of
    the base of an inclined chute or suspended above
    conveyor belts or stainless steel vibratory
    feeders. They are used to remove ferrous
    contaminants that happen sporadically in products
    lines, especially extensive bits of metal, for
    example, nuts, bolts or staples from dry
    products.
  • Grate magnetic separators have magnetic tubes
    composed in a system to permit the stream of
    material to course however a grate. They spread
    magnetic protection through cross-separated
    territories of equipment, for example, funnels or
    containers. They can be used to remove fine or
    generally huge bits of metal contaminants with
    this magnetic separator design.

4
?Liquid line trap magnetic separators are traps
with tube magnets inside them, composed with a
channel port to match existing pipelines. The
magnet gathers metal pieces like baling wire or
staples. ?Suspended magnetic separators hang
above conveyor belts and separate metal pieces
from the material as they go under the magnet.
They separate huge bits of metal and can secure
equipment, for example, crushers, from harm.
5
How to select magnetic separator for sale
products? Please advise us the above necessary
information to make inquiry. If you arent in a
position to offer these information, please feel
free to contact our engineer and acquaint us with
the application environment and material
condition. The baffle is used to direct the
material onto or close the poles when they stream
down. By along these lines, more contaminants
will be attracted. Baffle can be little bars or
90 degree point.
6
Including handles goes for simple administrator.
Particularly with huge size which is too
overwhelming to handle. Another point of
preference of this configuration is to keep away
from contaminants dropping down when holding.
7
Designs of Multiple layers Multiple layers in
magnetic separator design comes in double layers.
Obviously, more layers means product is much
purer. However, it relies on upon the condition
of products. Easy to clean designs This design
is all the more conveniently to be cleaned.
Simply take out the magnetic center, the iron
pollution influences will tumble from the shell.
8
Thank You
Write a Comment
User Comments (0)