Install Vinyl Stickers in Seven Steps

1
Install vinyl stickers in seven steps!!!
2
Look for a perfect surface
Before taking any other step to install a printed
window sticker or a vinyl sticker, one must
ensure that he/she have a clean, smooth and dry
surface.
3
Clean the surface properly
If the surface is not clean enough then your next
job is to make the surface spotless dirtless,
non-oily and crystal and clear..
4
Mark the area
Once you are done with the above-mentioned tasks
then mark a particular area from that entire
cleaned surface.
5
Remove that white paper
All kinds of promotional decals or stickers are
often attached to a white backing paper which
actually protects stickers glue from air and
moisture.
6
Place the sticker
Now, slowly place the promotional window sticker
inside that marked area and fix it up there.
Please do not forget to rub the surface of the
sticker with a squeegee or a credit card.
7
Peel the transparent tapes
Last but not least, slowly peel the clear
transparent tape, of at a comfortable angle.
Please do it slowly and do not pull the sticker
itself from its surface.
8
Some extra care
You can use a pin or a sharp pointed object to
poke out the existing bubble. To get the best
results, do not try to adhere the sticker under
extreme hot or extreme cold environment. The
preferable temperature to apply these car window
stickers is 70-degree Fahrenheit.