H12-223 Dumps Questions and Answers

1
Huawei H12-223 Huawei Certified Network
Professional-RS-IEEP
2
Enjoy your success in Huawei Certification Exams
with our Huawei Certified Network
Professional-RS-IEEP Exam Dumps!!! H12-223 Dumps
Questions Answers with Huawei Certified Network
Professional-RS-IEEP Practice Test software is a
success leading way towards your Huawei H12-223
Exam. All the H12-223 Questions Answers are
tested and approved by professional experts to
assure 100 success in Huawei HCNP-RoutingSwitchi
ng exam.
H12-223 Exam Dumps
H12-223 Practice Dumps
3
You dont need to take any stress about your
H12-223 Dumps Questions. We will provide you some
demo questions and answers of H12-223 Exam Dumps
here.
H12-223 Exam Dumps
H12-223 Practice Dumps
4
Did You Know!
H12-223 Exam Dumps
H12-223 Practice Dumps
5
Question NO 1, A network project is often used
with the corresponding supporting systems. Which
of the following supporting systems are usually
included? (Multiple Choice) A. Power supply
system B. Air conditioning system C. Transportatio
n D. Office equipment E. Extra-low voltage
cabling Answer A B E
www.dumpspedia.com/H12-223-dumps-questions.html
6
Question NO 2, Which of the following statements
regarding Huawei network optimization service
(NOS) is true? (Multiple Choice) A. Improves
network availability and performance. B. Improves
the productivity. C. Reduces costs. D. Implements
knowledge transfer. Answer A B C D
www.dumpspedia.com/H12-223-dumps-questions.html
7
Question NO 3, After PPP Multilink is configured,
data is evenly allocated to member links based on
the source and destination addresses, A. TRUE B.
FALSE Answer B
www.dumpspedia.com/H12-223-dumps-questions.html
8
Question NO 4, Which of the following is the
purpose of access security optimization? A. To
ensure that sensitive management information will
not be intercepted. B. To prevent or reduce
external network attacks and harm. C. To ensure
secure access to key services. D. To achieve
secure user access control. Answer D
www.dumpspedia.com/H12-223-dumps-questions.html
9
Question NO 5, Which of the following statements
regarding OSPF neighbor relationship faults is
false? A. The ExStart state indicates that two
neighbor routers have inconsistent MTUs or the
same OSPF Router ID (RID). B. For non-DR and
non-BDR routers on an Ethernet link, the 2-Way
state is acceptable. C. The Init state indicates
that the router has received Hello packets from
its neighbors but the received Hello packets do
not contain the OSPF RID of the receiving
router. D. The Attempt state indicates that the
router does not send unicast Hello packets to
configured neighbors. Answer D
www.dumpspedia.com/H12-223-dumps-questions.html
10
Question NO 6, Which of the following causes may
result in an IS-IS neighbor relationship fault?
(Multiple Choice) A. The devices on two ends of
a link have the same system ID. B. The devices on
two ends of a link have inconsistent IS-IS
levels. C. When an IS-IS Level-1 neighbor
relationship is established, the devices on two
ends of a link have inconsistent area
addresses. D. The IP addresses of interfaces on
two ends of a link are on different network
segments. Answer A B C D
www.dumpspedia.com/H12-223-dumps-questions.html
11
Question NO 7, Which of the following link can
run PPP instead of HDLC? (Multiple
Choice) A. ATM B. ISDN C. MSTP D. PSTN E. El Ans
wer B D
www.dumpspedia.com/H12-223-dumps-questions.html
12
Question NO 8, Which of the following items is
conducted in the cause list phase of the
structured network troubleshooting
process? A. One-by-one check B. Information
filter C. Temporary environment
setup D. Troubleshooting assessment Answer B
www.dumpspedia.com/H12-223-dumps-questions.html
13
Question NO 9, Which of the following statements
regarding the basic device information check is
true? A. You can run the display
patch-information command to check patch
information. B. The device time should be
consistent with the actual time (time difference
lt 24 hours) so that a fault can be accurately
located based on the occurrence time. C. The
debugging functions can be enabled when the
device is running properly. D. You can run the
display current-configuration command to check
the PCB version and the software version of a
card. Answer A
www.dumpspedia.com/H12-223-dumps-questions.html
14
Question NO 10, A network administrator fails to
access devices on the internal network through
Telnet. Which of the following causes is the most
impossible? A. The route is unreachable, and the
client fails to establish a TCP connection with
the server. B. The number of login users reaches
the upper limit. C. An ACL is bound in the VTY
user interface view. D. The protocol inbound all
command is configured in the VTY user interface
view. Answer D
www.dumpspedia.com/H12-223-dumps-questions.html
15
WHY CHOOSE US!
Offering Effective PDF Tests Training to
Individuals and Companies
100 Passing Assurance on All Dumps
Special Student Discount Available
Printable and Searchable PDF Braindumps
User Interactive Exams Software
H12-223 Exam Dumps
H12-223 Practice Dumps
16
H12-223 Exam Dumps
H12-223 Practice Dumps
17
Good luck
Dumpspedia provides you guaranteed success in
H12-223 Dumps Questions as we have latest
H12-223 Exam Dumps. Click Here following link to
download H12-223 Exam Braindumps.
H12-223 Exam Dumps
H12-223 Practice Dumps