What Causes a Starter Motor to Burn Out

About This Presentation
Title:

What Causes a Starter Motor to Burn Out

Description:

A starter motor in a car is a cranking contrivance used to crank the internal combustion engine to bring the vehicle into the state of operation. It allows the engine to start by spinning over the turning crankshaft. The failure of a starter motor can be annoying. Sometimes, it burns up due to manufacturing defects, and sometimes, the cause can be a solenoidal issue or a user error. Incorrect starter fluid also puts a lot of stress on the starter. Some problems are virtually impossible to avoid. To avoid hefty repair bill on repair, you have to keep up with the recommend replacement interval and keep an eye on the vehicle’s abnormality related to the performance. – PowerPoint PPT presentation

Number of Views:11

less

Transcript and Presenter's Notes

Title: What Causes a Starter Motor to Burn Out


1
WHAT CAUSES A STARTER MOTOR TO BURN OUT?
2
An internal combustion engine is a feedback
system which depends on the inertia of the first
cycle to start the next cycle.
3
The primary job of a starter motor is to generate
the crank required to start an internal
combustion engine.
4
By doing so, it plays an important role in the
performance of a car engine. However, a defective
or abnormal starter motor fails to start a car
engine.
5
So, signs of a starter motor failure should not
be neglected and root causes of the starter motor
failure should be repaired immediately.
6
CAUSES OF A STARTER MOTOR BURN OUT
7
Primary functions of an ignition switch is to
establish an electrical pathway between the
battery and the starter motor.
FAULTY IGNITION SWITCH
8
Besides, it also helps to activate the electrical
system and different components of the ignition
system of a car.
9
Starter motor disengages once the engine gets
operational.
10
However, if the ignition switch gets stuck, then
the starter will not disengage in time which
could lead to the starter motor burning out.
11
Starter solenoid is directly attached to the
starter motor and its primary function is to
connect the starter pinion with the flywheel of
the engine.
DEFECTIVE STARTER SOLENOID
12
It also helps to disconnect the pinion from the
flywheel of the engine.
13
If it fails to disengage the pinion once the
engine has been started, then it could damage the
starter motor of the car.
14
Deposition of dirt particles, oxides of metals or
other kinds of contaminants inside the starter
motor might trigger major problems in this
component.
CONTAMINATION AND USER ERRORS
15
Besides, if a person turns the ignition key
longer than required, then it could lead to
starter motor burn out.
16
Moreover, faults in the wiring system which
connects the ignition switch with the starter
motor might also cause starter motor failure.
17
FINALLY
18
A starter motor is an important part of the
ignition system of a car.
19
It engages with the engine to start the
combustion cycle and disengages once the engine
begins to operate.
20
However, a burn out starter could not do its job
as a result of which the engine fails to start.
21
So, root causes of starter motor burn out needs
to be detected and repaired in time.
22
THANK YOU
https//emcnv.com/
Write a Comment
User Comments (0)