How to Install skirting boards

1
HOW TO INSTALL SKIRTING BOARDS
2
Step 1 Remove the old skirting
Using a hammer and chisel remove old
skirting.Placing the chisel at the back of the
skirting and gently tap with a hammer until the
chisel fits behind.
3
Step 2 Vaccum that area

• Vacuum or clean the zone so it is free of dust
  and garbage before introducing the new skirting.

4
Step 3 Join the corner sections
You need to join areas together at corners, both
inside and outside. Then you need to cut the ends
of the board at a 45-degree angle.
5
Step 4 Apply adhesive at the back board

• Apply glue to the back of the board and later
  hold the board at the base.
• Press base edge first against the divider and
  after that apply weight to the whole board for
  better tack between the two surfaces.

6
Finishing Tip
It is preferable that you apply atleast three
coats of clear or tinted Woodoc to your new
skirting boards for better protection or else if
you prefer paint, paint it with water-based
acrylic.
7
Powered By www.skirtingonline.co.uk